Was this page helpful?
Your feedback about this content is important. Let us know what you think.
Additional feedback?
1500 characters remaining
Export (0) Print
Expand All

Windows CE Boot Loader Output for the NEC Solution Gear 2-Vr5500 Development Kit (Windows CE 5.0)

Windows CE 5.0
Send Feedback

This is the output for the Windows CE boot loader:

Microsoft Windows CE Ethernet Bootloader Common Library Version 1.0 Built Apr 29
 2004 19:50:36
Microsoft Windows CE Loader 2.0 for NEC SG2_Vr5500 Built Apr 29 2004 at 17:06:21
INFO: OALPCIInit: ALI M1535+ Bridge detected
CPU Model 1  SysClock 3  PCB Revision 7  DIP2 0x04
Flash Enabled (DIP2-3 off), Paged Boot on page 0 (DIP2-5 on)
System ready!
Preparing for download...
INFO: Predownload....
INFO: Boot configuration found at 0x9fc60000
Hit space to enter configuration menu 5...
Hit space to enter configuration menu 4...
Hit space to enter configuration menu 3...
Hit space to enter configuration menu 2...
Hit space to enter configuration menu 1...
Am79c973: Wait for link... Link detected
INFO: Boot device uses MAC 00:00:4c:80:2a:e5
INFO: *** Device Name SGEAR10981 ***
InitDHCP():: Calling ProcessDHCP()
ProcessDHCP()::DHCP_INIT
Got Response from DHCP server, IP address: 192.168.0.96

ProcessDHCP()::DHCP IP Address Resolved as 192.168.0.96, netmask: 255.255.255.0
Lease time: 604800 seconds
Got Response from DHCP server, IP address: 192.168.0.96
No ARP response in 2 seconds, assuming ownership of 192.168.0.96
+EbootSendBootmeAndWaitForTftp
Sent BOOTME to 255.255.255.255
Sent BOOTME to 255.255.255.255
.
.

If you press the SPACEBAR to break into the configuration menu, you see the following output:

Microsoft Windows CE Ethernet Bootloader Common Library Version 1.0 Built Apr 29
 2004 19:50:36
Microsoft Windows CE Loader 2.0 for NEC SG2_Vr5500 Built Apr 29 2004 at 17:06:21
INFO: OALPCIInit: ALI M1535+ Bridge detected
CPU Model 1  SysClock 3  PCB Revision 7  DIP2 0x04
Flash Enabled (DIP2-3 off), Paged Boot on page 0 (DIP2-5 on)
System ready!
Preparing for download...
INFO: Predownload....
INFO: Boot configuration found at 0x9fc60000
Hit space to enter configuration menu 5...
Hit space to enter configuration menu 4...
Hit space to enter configuration menu 3...

--------------------------------------------------------------------------------
 Main Menu
--------------------------------------------------------------------------------
 [1] Show Current Settings
 [2] Set Device Id
 [3] Select Boot Device
 [4] Select Debug Device
 [5] Network Settings
 [6] Save Settings
 [0] Exit and Continue

 Selection:

See Also

Downloading the Boot Loader to the NEC Solution Gear 2-Vr5500 Development Kit


Send Feedback on this topic to the authors

Feedback FAQs

© 2006 Microsoft Corporation. All rights reserved.


Show:
© 2015 Microsoft