How to Create an IP Phone on a CEPC
The IP Phone configuration provides a starting point for devices that use Voice over IP (VoIP) technology for making phone calls.
To create an IP Phone on a CEPC, you can use either the New Platform Wizard that includes a pre-configured option, or the catalog to select the appropriate features for your device.
For a list of features that are included when using the New Platform Wizard, see IP Phone Features.
Hardware and Software Assumptions
- Your SIP server is already configured, if you are using one.
- Your Platform Builder installation includes the CEPC x86 board support package.
- You have a CEPC already configured. For more information, see How to Set up a CEPC and How to Use the IDE to Create, Customize, and Build a Platform.
- Your CEPC has an audio card.
- Your CEPC has a speaker and a microphone. You can also use a phone headset with a speaker.
To track your progress in the following table, select the check box next to each step.
| Step | Topic | |
|---|---|---|
| 1. Create an image by selecting the IP Phone Advanced configuration in the New Platform Wizard. | Creating an IP Phone OS Image for a CEPC | |
| 2. Create a provisioning file. | Creating an IP Phone Provisioning File | |
| 3. Configure the remote Ethernet connection. | Configuring an Ethernet Remote Connection | |
| 4. Download the image to the CEPC using an Ethernet connection.
After image download is complete, you will hear a dial tone. |
Downloading an OS Image to a Target Device | |
| 5. Test the IP phone on the CEPC by calling another IP phone. | Testing the IP Phone |
See Also
How to Create an IP Phone on an Emulator | How to Use the IP Phone to Call Windows Messenger | IP Phone Features | VoIP Application Interface Layer Architecture | VoIP Application Interface Layer Reference | Real-time Communications Architecture
Last updated on Wednesday, April 13, 2005
© 2005 Microsoft Corporation. All rights reserved.