Data Collection and Display (Windows CE 5.0)

Article
09/14/2012

To display system information from a target device in the Remote Kernel Tracker tool, you must first connect to the target device with Platform Manager. For more information about connecting to a target device with Platform Manager, see Application Connectivity.

The tool collects and displays data in the following modes.

Mode	Description
Data Collection	Collects data and updates the UI in real time. This mode is the default mode for Remote Kernel Tracker. This mode allows you to monitor system events as they happen. To observe the initial boot sequence of the OS, launch the tool before you download the run-time image. In this mode, the amount of data collected is limited only by the amount of system memory on your desktop computer.
Limited Buffer	Allows you to specifically limit the quantity of data stored by Remote Kernel Tracker by defining the buffer size. Otherwise, this mode is the same as data collection mode. When the amount of data stored within the buffer reaches the predefined limit, the newest events begin to replace the oldest events. The size of the buffer can range from 1 MB to 100 MB. This mode is useful when running stress tests or engaging in other tasks that generate a large amount of data, because the tool's performance diminishes as the amount of data in its buffer increases.
File	Allows you to view data from a Windows CE System Log (.clg) file. You can create a .clg file after you collect data in data collection mode or limited buffer mode. The .clg file records all data collected during Remote Kernel Tracker session.

Data Collection

Collects data and updates the UI in real time. This mode is the default mode for Remote Kernel Tracker.

This mode allows you to monitor system events as they happen.

To observe the initial boot sequence of the OS, launch the tool before you download the run-time image.

In this mode, the amount of data collected is limited only by the amount of system memory on your desktop computer.

Limited Buffer

Allows you to specifically limit the quantity of data stored by Remote Kernel Tracker by defining the buffer size. Otherwise, this mode is the same as data collection mode.

When the amount of data stored within the buffer reaches the predefined limit, the newest events begin to replace the oldest events.

The size of the buffer can range from 1 MB to 100 MB.

This mode is useful when running stress tests or engaging in other tasks that generate a large amount of data, because the tool's performance diminishes as the amount of data in its buffer increases.

File

Allows you to view data from a Windows CE System Log (.clg) file.

You can create a .clg file after you collect data in data collection mode or limited buffer mode.

The .clg file records all data collected during Remote Kernel Tracker session.

By default, the Kernel Tracker tool does not record data during boot time and does not collect interrupts, translation look-aside buffer (TLB) misses, or kernel calls.

For more information about collecting data during boot time, see Configuring Remote Kernel Tracker to Collect Data During Boot Time.

For more information about collecting all types of data, see Configuring Remote Kernel Tracker to Collect All Types of Data.

Note Remote Kernel Tracker does not display interrupts for a run-time image built from the default Release configuration unless you enable profiling before building the run-time image.

In data collection mode and limited buffer mode, you can view activity on the target device in real time. For more information, see Viewing Events While They Occur.

You can modify the data that Remote Kernel Tracker collects by configuring collection zones. For more information about collection zones, see Debug Zones.

Data Collection and Display (Windows CE 5.0)

See Also

Additional resources