MSFT_NetIPv6Protocol

MSFT_NetIPv6Protocol class

Represents the IPv6 protocol for the Microsoft TCP/IP WMI v2 provider.

The following syntax is simplified from Managed Object Format (MOF) code and includes all of the inherited properties.

Syntax

[UMLPackagePath("CIM::Core::Service"), ClassVersion("1.0.0"), dynamic, provider("nettcpip"), AMENDMENT]
class MSFT_NetIPv6Protocol : MSFT_NetBaseIPProtocol
{
  string   InstanceID;
  string   Caption;
  string   ElementName;
  datetime InstallDate;
  string   StatusDescriptions[];
  string   Status;
  uint16   HealthState;
  uint16   CommunicationStatus;
  uint16   DetailedStatus;
  uint16   OperatingStatus;
  uint16   PrimaryStatus;
  string   OtherEnabledState;
  uint16   RequestedState = 12;
  uint16   EnabledDefault = 2;
  string   SystemCreationClassName;
  string   SystemName;
  string   CreationClassName;
  string   Description;
  string   Name;
  uint16   OperationalStatus[];
  uint16   EnabledState;
  datetime TimeOfLastStateChange;
  string   NameFormat;
  uint16   ProtocolType;
  uint16   ProtocolIFType;
  string   OtherTypeDescription;
  uint32   DefaultHopLimit;
  uint32   NeighborCacheLimit;
  uint32   RouteCacheLimit;
  uint32   ReassemblyLimit;
  uint8    IcmpRedirects;
  uint32   SourceRoutingBehavior;
  uint8    DhcpMediaSense;
  uint8    MediaSenseEventLog;
  uint32   MldLevel;
  uint32   MldVersion;
  uint8    MulticastForwarding;
  uint8    GroupForwardedFragments;
  uint8    RandomizeIdentifiers;
  uint8    AddressMaskReply;
  uint32   UseTemporaryAddresses;
  uint32   MaxDadAttempts;
  datetime MaxValidLifetime;
  datetime MaxPreferredLifetime;
  datetime RegenerateTime;
  datetime MaxRandomTime;
};

Members

The MSFT_NetIPv6Protocol class has these types of members:

Methods

The MSFT_NetIPv6Protocol class has these methods.

MethodDescription
RequestStateChange

Requests that the state of the element be changed to the value specified in the RequestedState parameter. When the requested state change takes place, the enabled state and requested state of the element will be the same. Invoking the RequestChangeState method multiple times could result in earlier requests being overwritten or lost. If 0 is returned, then the task completed successfully and the use of CIM_ConcreteJob was not required. If 4096 (0x1000) is returned, then the task will take some time to complete, CIM_ConcreteJob will be created, and its reference returned in the output parameter Job. Any other return code indicates an error condition.

This method is inherited from CIM_EnabledLogicalElement.

 

Properties

The MSFT_NetIPv6Protocol class has these properties.

AddressMaskReply
Data type: uint8
Access type: Read/write

Whether the computer should respond to ICMP address mask packets.

This property is inherited from MSFT_NetBaseIPProtocol.

ValueMeaning
Disabled
0

The computer should not respond to ICMP address mask packets.

Enabled
1

The computer should not respond to ICMP address mask packets.

 

Caption
Data type: string
Access type: Read-only
Qualifiers: MaxLen (64)

Contains a short textual description of the object.

This property is inherited from CIM_ManagedElement.

CommunicationStatus
Data type: uint16
Access type: Read-only

Indicates the ability of the instrumentation to communicate with this element. A NULL value indicates that instrumentation does not support this property.

This property is inherited from CIM_ManagedSystemElement.

ValuesMeaning
Unknown
0

Indicates that the instrumentation cannot report on the CommunicationStatus property at this time.

Not Available
1

Indicates that the instrumentation is capable of reporting this property, but intentionally does not for this element.

Communication OK
2

Indicates only that communication is established with the element.

Lost Communication
3

Indicates that the element has been contacted in the past, but is currently unreachable.

No Contact
4

Indicates that the instrumentation has contact information for this element, but has never been able to communicate with it.

DMTF Reserved
5–32767

Reserved.

Vendor Reserved
32768 ≤ value

Reserved.

 

CreationClassName
Data type: string
Access type: Read-only
Qualifiers: key, MaxLen (256)

Indicates the name of the class or the subclass used in the creation of an instance. When used with the other key properties of this class, this property allows all instances of this class and its subclasses to be uniquely identified.

This property is inherited from CIM_ServiceAccessPoint.

DefaultHopLimit
Data type: uint32
Access type: Read/write

The default hop limit for packets sent.

This property is inherited from MSFT_NetBaseIPProtocol.

Description
Data type: string
Access type: Read-only
Qualifiers: Override ("Description")

The Description property provides a textual description of the object.

This property is inherited from CIM_ProtocolEndpoint.

DetailedStatus
Data type: uint16
Access type: Read-only
Qualifiers: ModelCorrespondence ("CIM_EnabledLogicalElement.PrimaryStatus", "CIM_ManagedSystemElement.HealthState")

Indicates additional status details that complement the PrimaryStatus property. A NULL value indicates that the instrumentation does not support this property.

This property is inherited from CIM_ManagedSystemElement.

ValuesMeaning
Not Available
0

Indicates that the instrumentation is capable of reporting this property, but intentionally does not report it for this element.

No Additional Information
1

Indicates that no details have to be added to the PrimaryStatus property, for example when the PrimaryStatus is set to OK.

Stressed
2

Indicates that the element functions, but requires attention. Overload and overheated are examples of Stressed states.

Predictive Failure
3

Indicates that an element functions nominally, but predicts a failure in the near future.

Non-Recoverable Error
4

Indicates that this element is in an error condition that requires human intervention.

Supporting Entity in Error
5

Indicates that an element on which this element depends is in error. This element might be OK but cannot function because of the state of a dependent element. An example is a network service or endpoint that cannot function due to lower-layer networking problems.

DMTF Reserved
6–32767

Reserved.

Vendor Reserved
32768 ≤ value

Reserved.

 

DhcpMediaSense
Data type: uint8
Access type: Read/write

Whether to turn on the media sensing capability of the TCP/IP stack.

This property is inherited from MSFT_NetBaseIPProtocol.

ValueMeaning
Enabled
1

Turns on the media sensing capability of the TCP/IP stack.

Disabled
0

Turns off the media sensing capability of the TCP/IP stack.

 

ElementName
Data type: string
Access type: Read-only

Contains a user-friendly name for the object. This property allows each instance to define a user-friendly name in addition to its key properties, identity data, and description information.

This property is inherited from CIM_ManagedElement.

EnabledDefault
Data type: uint16
Access type: Write-only

An enumerated value indicating an administrator's default or startup configuration for the Enabled State of an element. By default, the element is "Enabled" (value=2).

This property is inherited from CIM_EnabledLogicalElement.

Enabled (2)
Disabled (3)
Not Applicable (5)
Enabled but Offline (6)
No Default (7)
DMTF Reserved (8–32767)
Vendor Reserved (32768–65535)
EnabledState
Data type: uint16
Access type: Read-only
Qualifiers: ModelCorrespondence ("CIM_EnabledLogicalElement.OtherEnabledState") , Override ("EnabledState")

EnabledState is an integer enumeration that indicates the enabled and disabled states of an element. It can also indicate the transitions between these requested states. For example, shutting down (value=4) and starting (value=10) are transient states between enabled and disabled.

This property is inherited from CIM_ProtocolEndpoint.

ValueMeaning
Unknown
0

The element state is unknown.

Other
1

The element is in a state other than one listed here.

Enabled
2

The element is or could be executing commands, will process any queued commands, and queues new requests.

Disabled
3

The element will not execute commands and will drop any new requests.

Shutting Down
4

The element is in the process of going to a Disabled state.

Not Applicable
5

The element does not support being enabled or disabled.

Enabled but Offline
6

The element might be completing commands, and will drop any new requests.

In Test
7

The element is in a test state.

Deferred
8

The element might be completing commands, but will queue any new requests.

Quiesce
9

The element is enabled but in a restricted mode.

Starting
10

The element is in the process of going to an Enabled state. New requests are queued.

DMTF Reserved
11–32767
Vendor Reserved
32768–65535

 

GroupForwardedFragments
Data type: uint8
Access type: Read/write

Whether to group fragments before forwarding them.

This property is inherited from MSFT_NetBaseIPProtocol.

ValueMeaning
Disabled
0

Fragments are not grouped before forwarding.

Enabled
1

Fragments are grouped before forwarding.

 

HealthState
Data type: uint16
Access type: Read-only

Indicates the current health of the element. This attribute expresses the health of this element but not necessarily that of its sub-components.

This property is inherited from CIM_ManagedSystemElement.

ValuesMeaning
Unknown
0

The implementation cannot report on HealthState at this time.

OK
5

The element is fully functional and is operating within normal operational parameters and without error.

Degraded/Warning
10

The element is in working order and all functionality is provided. However, the element is not working to the best of its abilities. For example, the element might not be operating at optimal performance or it might be reporting recoverable errors

Minor failure
15

All functionality is available but some might be degraded.

Major failure
20

The element is failing. It is possible that some or all of the functionality of this component is degraded or not working.

Critical failure
25

The element is non-functional and recovery might not be possible.

Non-recoverable error
30

The element has completely failed, and recovery is not possible. All functionality provided by this element has been lost.

DMTF Reserved
31 ≤ value

DMTF has reserved the unused portion of the continuum for additional HealthStates values in the future.

 

IcmpRedirects
Data type: uint8
Access type: Read/write

Whether to update the path cache in response to Internet Control Message Protocol (ICMP) redirect packets.

This property is inherited from MSFT_NetBaseIPProtocol.

ValueMeaning
Disabled
0

The path cache is not updated in response to ICMP redirect packets.

Enabled
1

The path cache is updated in response to ICMP redirect packets.

 

InstallDate
Data type: datetime
Access type: Read-only

Indicates when the object was installed. The lack of a value does not indicate that the object is not installed.

This property is inherited from CIM_ManagedSystemElement.

InstanceID
Data type: string
Access type: Read-only

Uniquely and opaquely identifies an instance of this class within the scope of the containing Namespace.

Important  In order to ensure uniqueness within the Namespace, the value of InstanceID should be constructed in the following pattern:

OrgID:LocalID

OrgID must include a copyrighted, trademarked or otherwise unique name that is owned by the business entity defining the InstanceID, or be a registered ID that is assigned by a recognized global authority. This is similar to the structure of Schema class names. In addition, to ensure uniqueness the first colon in InstanceID must be between the OrgID andLocalID. Therefor the OrgID must not contain a colon (':').

LocalID is chosen by the business entity and should not be re-used to identify different underlying real-world elements.

If the preceding pattern is not used, the defining entity must assure that the resultant InstanceID is not re-used across any InstanceIDs produced by this or other providers for this Namespace.

For Distributed Management Task Force (DMTF) defined instances, the pattern must be used with the OrgID set to CIM.

 

This property is inherited from CIM_ManagedElement.

MaxDadAttempts
Data type: uint32
Access type: Read/write

The maximum number of attempts to detect duplicate addresses. The default value is 5.

MaxPreferredLifetime
Data type: datetime
Access type: Read/write

The maximum amount of time for which a temporary address is preferred. The default value is 1 day.

MaxRandomTime
Data type: datetime
Access type: Read/write

The maximum amount of time to use when computing a random delay at startup time. The default value is 10 minutes.

MaxValidLifetime
Data type: datetime
Access type: Read/write

The maximum amount of time for which a temporary address is valid. The default value is 7 days.

MediaSenseEventLog
Data type: uint8
Access type: Read/write

Whether to turn on logging for the media sensing capability.

This property is inherited from MSFT_NetBaseIPProtocol.

ValueMeaning
Enabled
1

Turns on logging for the media sensing capability.

Disabled
0

Turns off logging for the media sensing capability.

 

MldLevel
Data type: uint32
Access type: Read/write

The level of multicast support.

This property is inherited from MSFT_NetBaseIPProtocol.

ValueMeaning
None
0

Multicast packets can neither be sent nor received.

SendOnly
1

Multicast packets can be sent but not received.

All
2

Multicast packets can be sent as well as received.

 

MldVersion
Data type: uint32
Access type: Read/write

The maximum version of Internet Group Management Protocol (IGMP) and Multicast Listener Discovery (MLD) that the host supports.

This property is inherited from MSFT_NetBaseIPProtocol.

Version1 (2)
Version2 (3)
Version3 (4)
MulticastForwarding
Data type: uint8
Access type: Read/write

Whether to forward multicast packets.

This property is inherited from MSFT_NetBaseIPProtocol.

ValueMeaning
Disabled
0

Multicast packets are not forwarded.

Enabled
1

Multicast packets are forwarded.

 

Name
Data type: string
Access type: Read-only
Qualifiers: MaxLen (256) , key, Override ("Name")

A string that identifies this protocol endpoint with either a port or an interface on a device. To ensure uniqueness, the Name property should be prepended or appended with information from the Type or OtherTypeDescription properties. The method selected is described in the NameFormat property of this class.

This property is inherited from CIM_ProtocolEndpoint.

NameFormat
Data type: string
Access type: Read-only
Qualifiers: MaxLen (256)

NameFormat contains the naming heuristic that is selected to ensure that the value of the Name property is unique. For example, you might choose to prepend the name of the port or interface with the Type of ProtocolEndpoint (for example, IPv4) of this instance followed by an underscore.

This property is inherited from CIM_ProtocolEndpoint.

NeighborCacheLimit
Data type: uint32
Access type: Read/write

The maximum number of entries in the neighbor cache.

This property is inherited from MSFT_NetBaseIPProtocol.

OperatingStatus
Data type: uint16
Access type: Read-only
Qualifiers: ModelCorrespondence ("CIM_EnabledLogicalElement.EnabledState")

Indicates the current operational condition of the element. This property can be used to provide more detail about the current state of the element. It can also indicate transitional states. A NULL value indicates that the instrumentation does not support this property.

This property is inherited from CIM_ManagedSystemElement.

ValueMeaning
Unknown
0

Indicates that the instrumentation cannot report on the OperatingStatus property at this time.

Not Available
1

Indicates that the instrumentation is capable of reporting this property, but intentionally does not report it for this element.

Servicing
2

Indicates that the element is in process to be configured, maintained, cleaned, or otherwise administered.

Starting
3

Indicates that the element is being initialized.

Stopping
4

Indicates that the element is being brought to an orderly stop.

Stopped
5

Indicates that the element is intentionally stopped.

Aborted
6

Indicates that the element stopped in an unexpected way.

Dormant
7

Indicates that the element is inactive or quiesced.

Completed
8

Indicates that the element completed its operation. We recommend using a PrimaryStatus property value of OK, Error, or Degraded to indicate success or failure of the operation.

Migrating
9

Indicates that the element is being moved between host elements.

Emigrating
10

Indicates that the element is being moved away from the host element.

Immigrating
11

Indicates that the element is being moved to a new host element.

Snapshotting
12

Indicates that a snapshot copy of the element is being created.

Shutting Down
13

Indicates that the element is being brought to an abrupt stop.

In Test
14

Indicates that the element is performing test functions.

Transitioning
15

Indicates that the element is between states and is not fully available in either state. Use another value that indicates a more specific transition if one is available.

In Service
16

Indicates that the element is in service and operational.

DMTF Reserved
17–32767

Reserved.

Vendor Reserved
32768 ≤ value

Reserved.

 

OperationalStatus
Data type: uint16 array
Access type: Read-only
Qualifiers: ArrayType ("Indexed") , ModelCorrespondence ("CIM_ManagedSystemElement.StatusDescriptions")

Contains indicators of the current status of the element. The first value of OperationalStatus should contain the primary status for the element.

Note  OperationalStatus replaces the deprecated Status property. Due to the widespread use of the existing Status property in management applications, Microsoft strongly recommends that providers or instrumentation provide both the Status and OperationalStatus properties. When instrumented, Status (because it is single-valued) should also provide the primary status of the element.
 

This property is inherited from CIM_ProtocolEndpoint.

ValuesMeaning
Unknown
0

Indicates the implementation cannot report on OperationalStatus at this time.

Other
1

Indicates an undefined state.

OK
2

Indicates full functionality without errors.

Degraded
3

Indicates the element is working and all functionality is provided. However, the element is not working to the best of its abilities. For example, the element might not be operating at optimal performance or it might be reporting recoverable errors

Stressed
4

Indicates that the element is functioning, but needs attention. Overload and overheated are examples of Stressed states.

Predictive Failure
5

Indicates that an element is functioning nominally but predicting a failure in the near future.

Error
6

Indicates that an error has occurred.

Non-Recoverable Error
7

A nonrecoverable error has occurred.

Starting
8

The job is starting.

Stopping
9

The job is stopping.

Stopped
10

The element has been intentionally stopped.

In Service
11

Indicates the element is being configured, maintained, cleaned, or otherwise administered.

No Contact
12

Indicates that the monitoring system has knowledge of this element, but has never been able to establish communications with it.

Lost Communication
13

Indicates that the job is known to exist and has been contacted successfully in the past, but is currently unreachable.

Aborted
14

Indicates the job stopped in an unexpected way. The state and configuration of the job might need to be updated.

Dormant
15

Indicates that the job is inactive.

Supporting Entity in Error
16

Indicates that an element on which this job depends is in error. This element may be OK but is unable to function because of the state of a dependent element. An example is a network service or endpoint that cannot function due to lower-layer networking problems.

Completed
17

Indicates that the job has completed its operation. This value should be combined with either OK, ErrorError, or Degraded so that a client can tell if the complete operation Completed with OK (passed), Completed with Error (failed), or Completed with Degraded (the operation finished, but it did not complete OK or did not report an error).

Power Mode
18

"Power Mode" indicates that the element has additional power model information contained in the associated PowerManagementService association.

DMTF Reserved
19–32767

DMTF has reserved this portion of the range for additional OperationalStatus values in the future.

Vendor Reserved
32768–65535

Microsoft has reserved the unused portion of the range for additional OperationalStatus values in the future.

 

OtherEnabledState
Data type: string
Access type: Read-only

A string that describes the enabled or disabled state of the element when the EnabledState property is set to 1 ("Other"). This property must be set to null when EnabledState is any value other than 1.

This property is inherited from CIM_EnabledLogicalElement.

OtherTypeDescription
Data type: string
Access type: Read-only
Qualifiers: MaxLen (64) , ModelCorrespondence ("CIM_ProtocolEndpoint.ProtocolType", "CIM_ProtocolEndpoint.ProtocolIFType")

Describes the type of Protocol Endpoint when the Type property of this class (or any of its subclasses) is set to 1 (Other). This property should be set to null when the Type property is any value other than 1.

This property is inherited from CIM_ProtocolEndpoint.

PrimaryStatus
Data type: uint16
Access type: Read-only
Qualifiers: ModelCorrespondence ("CIM_ManagedSystemElement.DetailedStatus", "CIM_ManagedSystemElement.HealthState")

Indicates a high-level status value.

This property is inherited from CIM_ManagedSystemElement.

The possible values are.

Unknown (0)
OK (1)
Degraded (2)
Error (3)
DMTF Reserved (4–32767)
Vendor Reserved (32768 ≤ value )
ProtocolIFType
Data type: uint16
Access type: Read-only
Qualifiers: ModelCorrespondence ("CIM_ProtocolEndpoint.OtherTypeDescription")

An enumeration that is synchronized with the IANA ifType MIB. The ifType MIB is maintained at the URL, http://www.iana.org/assignments/ianaiftype-mib. Also, additional values defined by the DMTF are included. The property is used to categorize and classify instances of the ProtocolEndpoint class. Note that if the ProtocolIFType is set to 1 (Other), then the type information should be provided in the OtherTypeDescription string property.

This property is inherited from CIM_ProtocolEndpoint.

Unknown (0)
Other (1)
Regular 1822 (2)
HDH 1822 (3)
DDN X.25 (4)
RFC877 X.25 (5)
Ethernet CSMA/CD (6)
ISO 802.3 CSMA/CD (7)
ISO 802.4 Token Bus (8)
ISO 802.5 Token Ring (9)
ISO 802.6 MAN (10)
StarLAN (11)
Proteon 10Mbit (12)
Proteon 80Mbit (13)
HyperChannel (14)
FDDI (15)
LAP-B (16)
SDLC (17)
DS1 (18)
E1 (19)
Basic ISDN (20)
Primary ISDN (21)
Proprietary Point-to-Point Serial (22)
PPP (23)
Software Loopback (24)
EON (25)
Ethernet 3Mbit (26)
NSIP (27)
SLIP (28)
Ultra (29)
DS3 (30)
SIP (31)
Frame Relay (32)
RS-232 (33)
Parallel (34)
ARCNet (35)
ARCNet Plus (36)
ATM (37)
MIO X.25 (38)
SONET (39)
X.25 PLE (40)
ISO 802.211c (41)
LocalTalk (42)
SMDS DXI (43)
Frame Relay Service (44)
V.35 (45)
HSSI (46)
HIPPI (47)
Modem (48)
AAL5 (49)
SONET Path (50)
SONET VT (51)
SMDS ICIP (52)
Proprietary Virtual/Internal (53)
Proprietary Multiplexor (54)
IEEE 802.12 (55)
Fibre Channel (56)
HIPPI Interface (57)
Frame Relay Interconnect (58)
ATM Emulated LAN for 802.3 (59)
ATM Emulated LAN for 802.5 (60)
ATM Emulated Circuit (61)
Fast Ethernet (100BaseT) (62)
ISDN (63)
V.11 (64)
V.36 (65)
G703 at 64K (66)
G703 at 2Mb (67)
QLLC (68)
Fast Ethernet 100BaseFX (69)
Channel (70)
IEEE 802.11 (71)
IBM 260/370 OEMI Channel (72)
ESCON (73)
Data Link Switching (74)
ISDN S/T Interface (75)
ISDN U Interface (76)
LAP-D (77)
IP Switch (78)
Remote Source Route Bridging (79)
ATM Logical (80)
DS0 (81)
DS0 Bundle (82)
BSC (83)
Async (84)
Combat Net Radio (85)
ISO 802.5r DTR (86)
Ext Pos Loc Report System (87)
AppleTalk Remote Access Protocol (88)
Proprietary Connectionless (89)
ITU X.29 Host PAD (90)
ITU X.3 Terminal PAD (91)
Frame Relay MPI (92)
ITU X.213 (93)
ADSL (94)
RADSL (95)
SDSL (96)
VDSL (97)
ISO 802.5 CRFP (98)
Myrinet (99)
Voice Receive and Transmit (100)
Voice Foreign Exchange Office (101)
Voice Foreign Exchange Service (102)
Voice Encapsulation (103)
Voice over IP (104)
ATM DXI (105)
ATM FUNI (106)
ATM IMA (107)
PPP Multilink Bundle (108)
IP over CDLC (109)
IP over CLAW (110)
Stack to Stack (111)
Virtual IP Address (112)
MPC (113)
IP over ATM (114)
ISO 802.5j Fibre Token Ring (115)
TDLC (116)
Gigabit Ethernet (117)
HDLC (118)
LAP-F (119)
V.37 (120)
X.25 MLP (121)
X.25 Hunt Group (122)
Transp HDLC (123)
Interleave Channel (124)
FAST Channel (125)
IP (for APPN HPR in IP Networks) (126)
CATV MAC Layer (127)
CATV Downstream (128)
CATV Upstream (129)
Avalon 12MPP Switch (130)
Tunnel (131)
Coffee (132)
Circuit Emulation Service (133)
ATM SubInterface (134)
Layer 2 VLAN using 802.1Q (135)
Layer 3 VLAN using IP (136)
Layer 3 VLAN using IPX (137)
Digital Power Line (138)
Multimedia Mail over IP (139)
DTM (140)
DCN (141)
IP Forwarding (142)
MSDSL (143)
IEEE 1394 (144)
IF-GSN/HIPPI-6400 (145)
DVB-RCC MAC Layer (146)
DVB-RCC Downstream (147)
DVB-RCC Upstream (148)
ATM Virtual (149)
MPLS Tunnel (150)
SRP (151)
Voice over ATM (152)
Voice over Frame Relay (153)
ISDL (154)
Composite Link (155)
SS7 Signaling Link (156)
Proprietary P2P Wireless (157)
Frame Forward (158)
RFC1483 Multiprotocol over ATM (159)
USB (160)
IEEE 802.3ad Link Aggregate (161)
BGP Policy Accounting (162)
FRF .16 Multilink FR (163)
H.323 Gatekeeper (164)
H.323 Proxy (165)
MPLS (166)
Multi-Frequency Signaling Link (167)
HDSL-2 (168)
S-HDSL (169)
DS1 Facility Data Link (170)
Packet over SONET/SDH (171)
DVB-ASI Input (172)
DVB-ASI Output (173)
Power Line (174)
Non Facility Associated Signaling (175)
TR008 (176)
GR303 RDT (177)
GR303 IDT (178)
ISUP (179)
Proprietary Wireless MAC Layer (180)
Proprietary Wireless Downstream (181)
Proprietary Wireless Upstream (182)
HIPERLAN Type 2 (183)
Proprietary Broadband Wireless Access Point to Mulipoint (184)
SONET Overhead Channel (185)
Digital Wrapper Overhead Channel (186)
ATM Adaptation Layer 2 (187)
Radio MAC (188)
ATM Radio (189)
Inter Machine Trunk (190)
MVL DSL (191)
Long Read DSL (192)
Frame Relay DLCI Endpoint (193)
ATM VCI Endpoint (194)
Optical Channel (195)
Optical Transport (196)
Proprietary ATM (197)
Voice over Cable (198)
Infiniband (199)
TE Link (200)
Q.2931 (201)
Virtual Trunk Group (202)
SIP Trunk Group (203)
SIP Signaling (204)
CATV Upstream Channel (205)
Econet (206)
FSAN 155Mb PON (207)
FSAN 622Mb PON (208)
Transparent Bridge (209)
Line Group (210)
Voice E&M Feature Group (211)
Voice FGD EANA (212)
Voice DID (213)
MPEG Transport (214)
6To4 (215)
GTP (216)
Paradyne EtherLoop 1 (217)
Paradyne EtherLoop 2 (218)
Optical Channel Group (219)
HomePNA (220)
GFP (221)
ciscoISLvlan (222)
actelisMetaLOOP (223)
Fcip (224)
IANA Reserved (225–4095)
IPv4 (4096)
IPv6 (4097)
IPv4/v6 (4098)
IPX (4099)
DECnet (4100)
SNA (4101)
CONP (4102)
CLNP (4103)
VINES (4104)
XNS (4105)
ISDN B Channel Endpoint (4106)
ISDN D Channel Endpoint (4107)
BGP (4108)
OSPF (4109)
UDP (4110)
TCP (4111)
802.11a (4112)
802.11b (4113)
802.11g (4114)
802.11h (4115)
NFS (4200)
CIFS (4201)
DAFS (4202)
WebDAV (4203)
HTTP (4204)
FTP (4205)
NDMP (4300)
Telnet (4400)
SSH (4401)
SM CLP (4402)
SMTP (4403)
LDAP (4404)
RDP (4405)
HTTPS (4406)
DMTF Reserved (4407–32767)
Vendor Reserved (32768–65535)
ProtocolType
Data type: uint16
Access type: Read-only
Qualifiers: Deprecated ("CIM_ProtocolEndpoint.ProtocolIFType") , ModelCorrespondence ("CIM_ProtocolEndpoint.OtherTypeDescription")

Note: This property is deprecated in lieu of the ProtocolIFType enumeration. This deprecation was done to have better alignment between the IF-MIB of the IETF and this CIM class.

Deprecated description: ProtocolType is an enumeration that provides information to categorize and classify different instances of this class. For most instances, information in this enumeration and the definition of the subclass overlap. However, there are several cases where a specific subclass of ProtocolEndpoint is not required (for example, there is no Fibre Channel subclass of ProtocolEndpoint). Therefore, this property is needed to define the type of Endpoint.

This property is inherited from CIM_ProtocolEndpoint.

Unknown (0)
Other (1)
IPv4 (2)
IPv6 (3)
IPX (4)
AppleTalk (5)
DECnet (6)
SNA (7)
CONP (8)
CLNP (9)
VINES (10)
XNS (11)
ATM (12)
Frame Relay (13)
Ethernet (14)
TokenRing (15)
FDDI (16)
Infiniband (17)
Fibre Channel (18)
ISDN BRI Endpoint (19)
ISDN B Channel Endpoint (20)
ISDN D Channel Endpoint (21)
IPv4/v6 (22)
BGP (23)
OSPF (24)
MPLS (25)
UDP (26)
TCP (27)
RandomizeIdentifiers
Data type: uint8
Access type: Read/write

Whether to randomize interface identifiers.

This property is inherited from MSFT_NetBaseIPProtocol.

ValueMeaning
Disabled
0

Interface identifiers are not randomized.

Enabled
1

Interface identifiers are randomized.

 

ReassemblyLimit
Data type: uint32
Access type: Read/write

The maximum size of the reassembly buffer, in bytes.

This property is inherited from MSFT_NetBaseIPProtocol.

RegenerateTime
Data type: datetime
Access type: Read/write

The amount of time before a temporary address is deprecated and a new address is generated. The default value is 5 seconds.

RequestedState
Data type: uint16
Access type: Read-only

RequestedState is an integer enumeration that indicates the last requested or desired state for the element. The actual state of the element is represented by EnabledState. This property is provided to compare the last requested and current enabled or disabled states. Note that when EnabledState is set to 5 ("Not Applicable"), then this property has no meaning. By default, the RequestedState of the element is 5 ("No Change"). Refer to the EnabledState property description for explanations of the values in the RequestedState enumeration. It should be noted that there are two new values in RequestedState that build on the statuses of EnabledState. These are "Reboot" (10) and "Reset" (11). Reboot refers to doing a "Shut Down" and then moving to an "Enabled" state. Reset indicates that the element is first "Disabled" and then "Enabled". The distinction between requesting "Shut Down" and "Disabled" should also be noted. Shut Down requests an orderly transition to the Disabled state, and might involve removing power, to completely erase any existing state. The Disabled state requests an immediate disabling of the element, such that it will not execute or accept any commands or processing requests. This property is set as the result of a method invocation (such as StartService or StopService on CIM_Service), or can be overridden and defined as WRITEable in a subclass. The method approach is considered superior to a WRITEable property, because it allows an explicit invocation of the operation and the return of a result code. A particular instance of CIM_EnabledLogicalElement might not support RequestStateChange. If this occurs, the value 12 ("Not Applicable") is used.

This property is inherited from CIM_EnabledLogicalElement.

Enabled (2)
Disabled (3)
Shut Down (4)
No Change (5)
Offline (6)
Test (7)
Deferred (8)
Quiesce (9)
Reboot (10)
Reset (11)
Not Applicable (12)
DMTF Reserved (..)
Vendor Reserved (32768–65535)
RouteCacheLimit
Data type: uint32
Access type: Read/write

The maximum number of entries in the route cache.

This property is inherited from MSFT_NetBaseIPProtocol.

SourceRoutingBehavior
Data type: uint32
Access type: Read/write

The behavior for source-routed packets. Per RFC 5095, support for forwarding of source-routed IPv6 packets was removed, and a value for Forward has the same effect as DontForward.

This property is inherited from MSFT_NetBaseIPProtocol.

Forward (0)
DontForward (1)
Drop (2)
Status
Data type: string
Access type: Read-only
Qualifiers: Deprecated ("CIM_ManagedSystemElement.OperationalStatus") , MaxLen (10)

Contains a string indicating the primary status of the object.

Note  This property is deprecated and replaced by the OperationalStatus property. If you choose to use the Status property for backward compatibility it should be secondary to the OperationalStatus property.
 

This property is inherited from CIM_ManagedSystemElement.

The possible values are.

("OK")
("Error")
("Degraded")
("Unknown")
("Pred Fail")
("Starting")
("Stopping")
("Service")
("Stressed")
("NonRecover")
("No Contact")
("Lost Comm")
("Stopped")
StatusDescriptions
Data type: string array
Access type: Read-only
Qualifiers: ArrayType ("Indexed") , ModelCorrespondence ("CIM_ManagedSystemElement.OperationalStatus")

Indicates descriptions of the corresponding values in the OperationalStatus array. For example, if an element in the OperationalStatus property contains the value Stopping, then the element at the same array index in this property might contain an explanation as to why an object is being stopped.

This property is inherited from CIM_ManagedSystemElement.

SystemCreationClassName
Data type: string
Access type: Read-only
Qualifiers: key, MaxLen (256) , Propagated ("CIM_System.CreationClassName")

The CreationClassName of the scoping System.

This property is inherited from CIM_ServiceAccessPoint.

SystemName
Data type: string
Access type: Read-only
Qualifiers: key, MaxLen (256) , Propagated ("CIM_System.Name")

The Name of the scoping System.

This property is inherited from CIM_ServiceAccessPoint.

TimeOfLastStateChange
Data type: datetime
Access type: Read-only
Qualifiers: Override ("TimeOfLastStateChange")

The date or time when the EnabledState of the element last changed. If the state of the element has not changed and this property is populated, then it must be set to a 0 interval value. If a state change was requested, but rejected or not yet processed, the property must not be updated.

This property is inherited from CIM_ProtocolEndpoint.

UseTemporaryAddresses
Data type: uint32
Access type: Read/write

Whether to use temporary addresses.

ValueMeaning
No
0

Do not use temporary addresses.

Yes
1

Use temporary addresses.

Always
2

Always generate random numbers.

Counter
3

Use temporary addresses with the per-interface counter.

 

Requirements

Minimum supported client

Windows 8

Minimum supported server

Windows Server 2012

Namespace

Root\StandardCimv2

MOF

NetTCPIP.mof

DLL

NetTCPIP.dll

 

 

Community Additions

ADD
Show:
© 2016 Microsoft