DOT11_PHY_STATE_PARAMETERS (Compact 2013)

3/26/2014

This structure is used by a miniport driver that makes the NDIS_STATUS_DOT11_PHY_STATE_CHANGED indication when the hardware or software power state of a PHY changes on the 802.11 station.


typedef struct DOT11_PHY_STATE_PARAMETERS {
  NDIS_OBJECT_HEADER  Header;
  ULONG  uPhyId;
  BOOLEAN  bHardwarePhyState;
  BOOLEAN  bSoftwarePhyState;
} DOT11_PHY_STATE_PARAMETERS, *PDOT11_PHY_STATE_PARAMETERS;

Header

The type, revision, and size of the DOT11_PHY_STATE_PARAMETERS structure. This member is formatted as an NDIS_OBJECT_HEADER structure.

The miniport driver must set the members of Header to the following values:

Type

This member must be set to NDIS_OBJECT_TYPE_DEFAULT

Revision

DOT11__STATE_PARAMETERS_REVISION_1

Size

This member must be set to sizeof(DOT11_PHY_STATE_PARAMETERS)

uPhyId

The PHY identifier (ID) of the PHY whose state has changed.

The PHY ID is an index into the table of supported PHYs that are specified by the Native 802.11 Operational msDot11SupportedPhyTypes MIB object. For more information about PHY IDs and the msDot11SupportedPhyTypes MIB object, see OID_DOT11_SUPPORTED_PHY_TYPES.

If the uPhyId member is set to DOT11_PHY_ID_ANY, the NDIS_STATUS_DOT11_PHY_STATE_CHANGED indication applies to all PHYs in the msDot11SupportedPhyTypes MIB object.

bHardwarePhyState

A Boolean value that specifies the hardware power state of the PHY that is referenced by uPhyId. If TRUE, the hardware power state is enabled. If FALSE, the hardware power state is disabled.

For more information about the PHY’s hardware power state, see OID_DOT11_HARDWARE_PHY_STATE.

bSoftwarePhyState

A Boolean value that specifies the software power state of the PHY that is referenced by uPhyId. If TRUE, the software power state is enabled. If FALSE, the software power state is disabled.

For more information about the PHY’s software power state, see OID_DOT11_NIC_POWER_STATE.

Header

windot11.h

Show: