WDDM CCD Test for QueryHardwareCaps

Note  This content applies to the Windows Logo Kit (WLK). For the latest information using the new Windows Hardware Certification Kit (HCK), see Windows HCK User's Guide on the Windows Hardware Dev Center.

Type:

Overview

This test verifies that with a v1.1 driver, the DDI to query hardware capabilities of the adapter is implemented and calls it.

Details

This test verifies that with a v1.1 driver, the DDI to query hardware capabilities of the adapter is implemented and calls it. The test tries to query the hardware capabilities of all the targets connected to active paths in the system.

Run Time: ~10 minutes.
Log File: QueryHardwareCaps.xml
System Restart Required: No
Test Category:
Supported operating systems for Logo or Signature testing:
  • Windows 7

Program: QueryHardwareCaps.exe

Requirements

Software Requirements

The test tool requires the following software:

  • Supported operating system (see list above).

  • WDDM v1.1 driver installed

Hardware Requirements

The test tool requires the following hardware:

  • An adapter with v1.1 driver

  • At least one path should be active

Processor

The test tool runs on the following processor architectures:

  • x86

  • x64

  • IA64

Running WDDM CCD Test for QueryHardwareCaps

All test cases return PASS or FAIL. Review the test results in the log file for specific details about failures.

The test will return SKIP if the driver is non WDDM 1.1.

The test will return FAIL if there was a failure in calling the ddi.

Command Syntax

Command optionDescription

QueryHardwareCaps.exe

The test doesn't need any command line options.

 

Code Tour

File Manifest

FileLocation

QueryHardwareCaps.exe

[testbinroot]\NTTEST\WINDOWSTEST\Graphics\wddm\bin

 

 

 

Build date: 9/14/2012

Community Additions

ADD
Show: