Export (0) Print
Expand All

Writing an ISR

Drivers for physical devices that generate interrupts must have at least one interrupt service routine (ISR). The ISR must do whatever is appropriate to the device to dismiss the interrupt, possibly including stopping the device from interrupting. Then, it should do only what is necessary to save state and queue a DPC to finish the I/O operation at a lower priority (IRQL) than that at which the ISR executes.

A driver's ISR executes in an interrupt context, at some system-assigned DIRQL, as specified by the SynchronizeIrql parameter to IoConnectInterruptEx.

ISRs are interruptible. Another device with a higher system-assigned DIRQL can interrupt, or a high-IRQL system interrupt can occur, at any time.

Before the system calls an ISR, it acquires the interrupt's spin lock so the ISR cannot simultaneously execute on another processor. After the ISR returns, the system releases the spin lock.

Because an ISR runs at a relatively high IRQL, which masks off interrupts with an equivalent or lower IRQL on the current processor, it should return control as quickly as possible. Additionally, running an ISR at DIRQL restricts the set of support routines the ISR can call. For more information, see Managing Hardware Priorities.

Typically, an ISR performs the following general steps:

  • If the device that caused the interrupt is not one supported by the ISR, the ISR immediately returns FALSE.

  • Otherwise, the ISR clears the interrupt if necessary, saving whatever device context is necessary, and queues a DPC to complete the I/O operation at a lower IRQL. See DPC Objects and DPCs for more information. The ISR must then return TRUE.

Specifically, in drivers that do not overlap device I/O operations, the ISR should do the following:

  1. Determine whether the interrupt is spurious. If so, return FALSE immediately so the ISR of the device that interrupted will be called promptly. Otherwise, continue interrupt processing.

  2. Stop the device from interrupting, if necessary.

  3. Gather whatever context information the DpcForIsr (or CustomDpc) routine will need to complete I/O processing for the current operation.

  4. Store this context in an area accessible to the DpcForIsr or CustomDpc routine, usually in the device extension of the target device object for which processing the current I/O request caused the interrupt.

    If a driver overlaps I/O operations, the context information must include a count of outstanding requests the DPC routine is required to complete, along with whatever context the DPC routine needs to complete each request. If the ISR is called to handle another interrupt before the DPC has run, it must not overwrite the saved context for a request that has not yet been completed by the DPC.

  5. If the driver has a DpcForIsr routine, call IoRequestDpc with pointers to the current IRP, the target device object, and the saved context. IoRequestDpc queues the DpcForIsr routine to be run as soon as IRQL falls below DISPATCH_LEVEL on a processor.

    If the driver has a CustomDpc routine, call KeInsertQueueDpc with a pointer to the DPC object (associated with the CustomDpc routine) and pointer(s) to any saved context the CustomDpc routine will need to complete the operation. Usually, the ISR also passes pointers to the current IRP and the target device object. The CustomDpc routine is run as soon as IRQL falls below DISPATCH_LEVEL on a processor.

  6. Return TRUE to indicate that its device generated the interrupt.

In general, an ISR does no actual I/O processing to satisfy an IRP. Instead, it stops its device from interrupting, sets up necessary state information, and queues the driver's DpcForIsr or CustomDpc to do whatever I/O processing is necessary to satisfy the current request that caused the device to interrupt.

An ISR must run at DIRQL for the shortest possible interval. Following this guideline increases I/O throughput for every device in the machine because running at DIRQL masks off all interrupts to which the system has assigned a lesser or equal IRQL value.

The SynchronizeIrql of the driver's interrupt objects, specified when the driver called IoConnectInterrupt, determines the DIRQL at which the driver's ISR executes. For more information, see Synchronizing Access to Device Data.



Send comments about this topic to Microsoft

© 2015 Microsoft