Export (0) Print
Expand All

DrvStretchBltROP function

The DrvStretchBltROP function performs a stretching bit-block transfer using a ROP.

Syntax


BOOL DrvStretchBltROP(
  _Inout_  SURFOBJ         *psoDest,
  _Inout_  SURFOBJ         *psoSrc,
  _In_opt_ SURFOBJ         *psoMask,
  _In_     CLIPOBJ         *pco,
  _In_opt_ XLATEOBJ        *pxlo,
  _In_opt_ COLORADJUSTMENT *pca,
  _In_     POINTL          *pptlHTOrg,
  _In_     RECTL           *prclDest,
  _In_     RECTL           *prclSrc,
  _In_opt_ POINTL          *pptlMask,
  _In_     ULONG           iMode,
  _In_     BRUSHOBJ        *pbo,
  _In_     DWORD           rop4
);

Parameters

psoDest [in, out]

Pointer to a SURFOBJ structure that describes the surface on which to draw.

psoSrc [in, out]

Pointer to a SURFOBJ structure that describes the source surface for the bit-block transfer.

psoMask [in, optional]

Pointer to a SURFOBJ structure that defines a mask for the source. The mask is defined by a logic map, which is a bitmap with one bit per pixel. Typically, a mask limits the area to be modified in the destination surface. This mask is always the same size as the source surface.

pco [in]

Pointer to a CLIPOBJ structure that limits the area to be modified in the destination. The CLIPOBJ_Xxx service routines are provided to enumerate the clip region as a set of rectangles.

Whenever possible, GDI simplifies the clipping involved. However, unlike DrvBitBlt, DrvStretchBltROP can be called with a single clipping rectangle. This prevents rounding errors in clipping the output.

pxlo [in, optional]

Pointer to a XLATEOBJ structure that specifies how color indices are to be translated between the source and target surfaces. If pxlo is NULL, no translation is needed.

This XLATEOBJ structure can also be queried to find the RGB color for any source index. A high quality stretching bit-block transfer will need to interpolate colors in some cases.

pca [in, optional]

Pointer to a COLORADJUSTMENT structure that defines the color adjustment values to be applied to the source bitmap before stretching the bits. For more information see the Microsoft Windows SDK documentation.

pptlHTOrg [in]

Pointer to a POINTL structure that defines the origin of the halftone brush on the destination surface. When using halftone brushes, the driver should align the upper-left pixel of the brush with this point and repeat the brush according to its dimensions. The driver should ignore this parameter if the rop4 parameter does not require a pattern.

prclDest [in]

Pointer to a RECTL structure that defines the rectangular area to be modified. This rectangle is specified in the coordinate system of the destination surface and is defined by two points: upper left and lower right. The two points that define the rectangle are not always well ordered, meaning the coordinates of the second point are not necessarily larger than those of the first point. The driver should interchange the two x values and/or the two y values if the destination rectangle is not well ordered.

The rectangle is lower-right exclusive; that is, it lower and right edges are not a part of the copy.

DrvStretchBltROP is never called with an empty destination rectangle.

prclSrc [in]

Pointer to a RECTL structure that defines the area to be copied. This rectangle is specified in the coordinate system of the source surface and is defined by two points: upper left and lower right. The two points that define the rectangle are always well ordered.

The rectangle is lower-right exclusive; that is, its lower and right edges are not a part of the copy.

The driver should map this rectangle to the rectangle defined by prclDest.

pptlMask [in, optional]

Pointer to a POINTL structure that defines a pixel in the mask to which prclMask points. This pixel corresponds with the upper-left pixel in the source rectangle to which prclSrc points. The driver should ignore this parameter if no mask is specified.

iMode [in]

Specifies how source pixels are combined to get output pixels. The HALFTONE mode is slower than the other modes, but produces higher quality images. This parameter can be one of the following values:

ValueMeaning

BLACKONWHITE

On a shrinking bit-block transfer, pixels should be combined with a Boolean AND operation. On a stretching bit-block transfer, pixels should be replicated.

COLORONCOLOR

On a shrinking bit-block transfer, enough pixels should be ignored so pixels need not be combined. On a stretching bit-block transfer, pixels should be replicated.

HALFTONE

The driver can use groups of pixels in the output surface to best approximate the color or gray level of the input.

WHITEONBLACK

On a shrinking bit-block transfer, pixels should be combined with a Boolean OR operation. On a stretching bit-block transfer, pixels should be replicated.

 

pbo [in]

Pointer to the BRUSHOBJ structure to be used to define the pattern for the bit-block transfer. GDI's BRUSHOBJ_pvGetRbrush service routine retrieves the device's realization of the brush. The driver can ignore this parameter if the rop4 parameter does not require a pattern.

rop4 [in]

Represents a raster operation that defines how the mask, pattern, source, and destination pixels are combined to write an output pixel to the destination surface.

This is a quaternary raster operation, which is a natural extension of the usual ternary Rop3 operation. A Rop4 has 16 relevant bits, which are similar to the 8 defining bits of a Rop3. (The other redundant bits of the Rop3 are ignored.) The simplest way to implement a Rop4 is to consider its 2 bytes separately. The lower byte specifies a Rop3 that should be computed wherever the mask to which psoMask points is 1. The high byte specifies a Rop3 that can be computed and applied wherever the mask is zero.

Return value

DrvStretchBltROP should return TRUE upon success. Otherwise, it should report an error code and return FALSE.

Remarks

The mapping is defined by prclSrc and prclDest. The points specified in prclDest and prclSrc lie on integer coordinates, which correspond to pixel centers. A rectangle defined by two such points is considered to be a geometric rectangle with two vertices whose coordinates are the given points, but with 0.5 subtracted from each coordinate. (POINTL structures are shorthand notation for specifying these fractional coordinate vertices.)

The driver can optionally implement DrvStretchBltROP. If the driver does hook this call, it can call EngStretchBltROP to perform those stretching blit operations that it does not support.

Requirements

Target platform

Desktop

Header

Winddi.h (include Winddi.h)

See also

DrvAlphaBlend
DrvBitBlt
DrvPlgBlt
DrvStretchBlt
DrvTransparentBlt
EngAlphaBlend
EngBitBlt
EngPlgBlt
EngStretchBlt
EngStretchBltROP
EngTransparentBlt

 

 

Send comments about this topic to Microsoft

Show:
© 2015 Microsoft