Was this page helpful?
Your feedback about this content is important. Let us know what you think.
Additional feedback?
1500 characters remaining
Export (0) Print
Expand All

Device Installations and System Restarts

Device installations should not force the user to restart the system unless absolutely necessary. The following circumstances are the only ones for which a system restart should be necessary:

Installing or removing a non-Plug and Play device.

For these earlier devices, a user typically must shut down the system before physically adding or removing the device. After the power is turned back on, the system starts.

Note  The device's setup files should not initiate a system restart, regardless of whether the user installs the drivers before or after plugging in the hardware.
Updating a driver for a system boot device.

If a device can potentially hold the system's paging, hibernation, or crash dump file, its drivers must service IRP_MN_DEVICE_USAGE_NOTIFICATION requests. The system sends this request before putting one of these files on the disk. If the drivers succeed the request, they must fail any subsequent IRP_MN_QUERY_REMOVE_DEVICE requests. When a driver for the device fails an IRP_MN_QUERY_REMOVE_DEVICE request, the system prompts the user to restart the system.

Note  The device's setup files should not initiate a system restart.
Installing a non-WDM filter driver.

If a filter driver is added to a non-WDM driver stack, the system must be restarted. In this case, the driver's installer or co-installer should request a system restart (see Initiating System Restarts During Device Installations).

Note   Adding a filter driver to a WDM driver stack does not require a system restart, unless an underlying device is a system boot device.

The section includes the following topics:

Avoiding System Restarts during Device Installations

Initiating System Restarts During Device Installations

 

 

Send comments about this topic to Microsoft

Show:
© 2015 Microsoft