Windows Embedded CE Boot Loader Output for the STMicroelectronics STi7109 MB442 Development Platform (Windows Embedded CE 6.0)

  • Article

1/5/2010

The following example shows typical output from the Windows Embedded CE boot loader:

Microsoft Windows CE Bootloader Common Library Version 1.4 Built Jun 26 2007 20:43:25
Microsoft Windows CE Loader 2.0 for ST Micro STi710x Built Jun 26 2007 at 20:44:45
Boot loader compiled for 7109 CPUs or 7100 CPU cut 1.3 or later
Bootloader compiled for COCO board
Bootloader compiled for 128MB boards
Detected: 7109 Cut 3.x
System ready!
Preparing for download...
Hit space to enter configuration menu 5...
Hit space to enter configuration menu 4...
Hit space to enter configuration menu 3...
Hit space to enter configuration menu 2...
Hit space to enter configuration menu 1...

** Device Name is [STi7109_5742] **

InitDHCP():: Calling ProcessDHCP()
ProcessDHCP()::DHCP_INIT
Got Response from DHCP server, IP address: 0.0.0.0

ProcessDHCP()::DHCP IP Address Resolved as 0.0.0.0, netmask: 255.255.252.0
Lease time: 7200 seconds
Got Response from DHCP server, IP address: 0.0.0.0
No ARP response in 2 seconds, assuming ownership of 0.0.0.0
+EbootSendBootmeAndWaitForTftp
Sent BOOTME to 255.255.255.255
TFTP link[0]: State:0, DestAddr.wPort: 0, SrcAddr.wPort: 0
TFTP link[1]: State:0, DestAddr.wPort: 0, SrcAddr.wPort: 0
TftpReceiver, port: 0x0000F401, wkp: 0x0000D403

Packet has the following data:
  boot.bin[NULL]octet[NULL]
TFTP packet could have 1 name/value pairs
Locked Down Link 1
Src IP 0.0.0.0 Port 03D4   Dest IP 0.0.0.0 Port EE00
Default TFTP block size set to: 512 bytes
There were no options detected in the TFTP
EthDown::TFTPD_OPEN::boot.bin
-EbootSendBootmeAndWaitForTftp

If you press the SPACEBAR to break into the configuration menu, you see the following output:

Microsoft Windows CE Bootloader Common Library Version 1.4 Built Jun 26 2007 20:43:25
Microsoft Windows CE Loader 2.0 for ST Micro STi710x Built Jun 26 2007 at 20:44:45
Boot loader compiled for 7109 CPUs or 7100 CPU cut 1.3 or later
Bootloader compiled for COCO board
Bootloader compiled for 128MB boards
Detected: 7109 Cut 3.x
System ready!
Preparing for download...
Hit space to enter configuration menu 5...
Hit space to enter configuration menu 4...
Hit space to enter configuration menu 3...

-----------------------------------------------------------------------
 Main Menu
-----------------------------------------------------------------------
 [1] Show Current Settings
 [2] Set Device Id
 [3] Select Boot Device
 [4] Network Settings
 [5] Toggle Clean Registry
 [6] Set Video output
 [7] Save Settings
 [8] Factory Settings
 [0] Exit and Continue

See Also

Tasks

How to Use the BSP for the STMicroelectronics STi7109 MB442 Development Platform
Downloading the Boot Loader to the STMicroelectronics STi7109 MB442 Development Platform