_control87, _controlfp, __control87_2
Collapse the table of content
Expand the table of content

_control87, _controlfp, __control87_2

Gets and sets the floating-point control word. A more secure version of _controlfp is available; see _controlfp_s.

unsigned int _control87( 
   unsigned int new,
   unsigned int mask 
unsigned int _controlfp( 
   unsigned int new,
   unsigned int mask 
int __control87_2(
   unsigned int new,
   unsigned int mask,
   unsigned int* x86_cw,
   unsigned int* sse2_cw


New control-word bit values.


Mask for new control-word bits to set.


Filled in with the control word for the x87 floating-point unit. Pass in 0 (NULL) to set only the SSE2 control word.


Control word for the SSE floating-point unit. Pass in 0 (NULL) to set only the x87 control word.

For _control87 and _controlfp, the bits in the value returned indicate the floating-point control state. For a complete definition of the bits that are returned by _control87, see FLOAT.H.

For __control87_2, the return value is 1, which indicates success.

The _control87 function gets and sets the floating-point control word. The floating-point control word enables the program to change the precision, rounding, and infinity modes in the floating-point math package, depending on the platform. You can also use _control87 to mask or unmask floating-point exceptions. If the value for mask is equal to 0, _control87 gets the floating-point control word. If mask is nonzero, a new value for the control word is set: For any bit that is on (that is, equal to 1) in mask, the corresponding bit in new is used to update the control word. In other words, fpcntrl = ((fpcntrl & ~mask) | (new & mask)) where fpcntrl is the floating-point control word.

Note Note

By default, the run-time libraries mask all floating-point exceptions.

_controlfp is a platform-independent, portable version of _control87. It is nearly identical to the _control87 function on Intel (x86), x64, and ARM platforms. If you are targeting x86, x64, or ARM platforms, use _control87 or _controlfp.

The difference between _control87 and _controlfp is in how they treat DENORMAL values. For Intel (x86), x64, and ARM platforms, _control87 can set and clear the DENORMAL OPERAND exception mask. _controlfp does not modify the DENORMAL OPERAND exception mask. This example demonstrates the difference:

_control87( _EM_INVALID, _MCW_EM ); 
// DENORMAL is unmasked by this call
_controlfp( _EM_INVALID, _MCW_EM ); 
// DENORMAL exception mask remains unchanged

The possible values for the mask constant (mask) and new control values (new) are shown in the following Hexadecimal Values table. Use the portable constants listed below (_MCW_EM, _EM_INVALID, and so forth) as arguments to these functions, rather than supplying the hexadecimal values explicitly.

Intel (x86)-derived platforms support the DENORMAL input and output values in hardware. The x86 behavior is to preserve DENORMAL values. The ARM platform and the x64 platforms that have SSE2 support enable DENORMAL operands and results to be flushed, or forced to zero. The _controlfp and _control87 functions provide a mask to change this behavior. The following example demonstrates the use of this mask.

_controlfp(_DN_SAVE, _MCW_DN);   
// Denormal values preserved on ARM platforms and on x64 processors with
// SSE2 support. NOP on x86 platforms.
_controlfp(_DN_FLUSH, _MCW_DN);   
// Denormal values flushed to zero by hardware on ARM platforms 
// and x64 processors with SSE2 support. Ignored on other x86 platforms.

On ARM platforms, the _control87 and _controlfp functions apply to the FPSCR register. On x64 architectures, only the SSE2 control word that's stored in the MXCSR register is affected. On Intel (x86) platforms, _control87 and _controlfp affect the control words for both the x87 and the SSE2, if present. The function __control87_2 enables both the x87 and SSE2 floating-point units to be controlled together or separately. If you want to affect both units, pass in the addresses of two integers to x86_cw and sse2_cw. If you only want to affect one unit, pass in an address for that parameter but pass in 0 (NULL) for the other. If 0 is passed for one of these parameters, the function has no effect on that floating-point unit. This functionality could be useful in situations where part of the code uses the x87 floating-point unit and another part of the code uses the SSE2 floating-point unit. If you use __control87_2 in one part of a program and set different values for the floating-point control words, and then use _control87 or _controlfp to further manipulate the control word, then _control87 and _controlfp might be unable to return a single control word to represent the state of both floating-point units. In such a case, these functions set the EM_AMBIGUOUS flag in the returned integer value to indicate that there is an inconsistency between the two control words. This is a warning that the returned control word might not represent the state of both floating-point control words accurately.

On the ARM and x64 architectures, changing the infinity mode or the floating-point precision is not supported. If the precision control mask is used on the x64 platform, the function raises an assertion and the invalid parameter handler is invoked, as described in Parameter Validation.


__control87_2 is not supported on the ARM or x64 architectures. If you use __control87_2 and compile your program for the ARM or x64 architectures, the compiler generates an error.

These functions are ignored when you use /clr (Common Language Runtime Compilation) or /clr:pure to compile because the common language runtime (CLR) only supports the default floating-point precision.

Hexadecimal Values

For the _MCW_EM mask, clearing the mask sets the exception, which allows the hardware exception; setting the mask hides the exception. If a _EM_UNDERFLOW or _EM_OVERFLOW occurs, no hardware exception is thrown until the next floating-point instruction is executed. To generate a hardware exception immediately after _EM_UNDERFLOW or _EM_OVERFLOW, call the FWAIT MASM instruction.


Hex value


Hex value

_MCW_DN (Denormal control)






_MCW_EM (Interrupt exception mask)














_MCW_IC (Infinity control)

(Not supported on ARM or x64 platforms.)






_MCW_RC (Rounding control)










_MCW_PC (Precision control)

(Not supported on ARM or x64 platforms.)


_PC_24 (24 bits)

_PC_53 (53 bits)

_PC_64 (64 bits)





Required header

_control87 , _controlfp, _control87_2


For more compatibility information, see Compatibility.

// crt_cntrl87.c
// processor: x86
// This program uses __control87_2 to output the x87 control 
// word, set the precision to 24 bits, and reset the status to 
// the default.

#include <stdio.h>
#include <float.h>
#pragma fenv_access (on)

int main( void )
    double a = 0.1;
    unsigned int control_word_x87;

    // Show original x87 control word and do calculation.
    control_word_x87 = __control87_2(0, 0,
                                     &control_word_x87, 0);
    printf( "Original: 0x%.4x\n", control_word_x87 );
    printf( "%1.1f * %1.1f = %.15e\n", a, a, a * a );

    // Set precision to 24 bits and recalculate.
    control_word_x87 = __control87_2(_PC_24, MCW_PC,
                                     &control_word_x87, 0);
    printf( "24-bit:   0x%.4x\n", control_word_x87 );
    printf( "%1.1f * %1.1f = %.15e\n", a, a, a * a );

    // Restore default precision-control bits and recalculate.
    control_word_x87 = __control87_2( _CW_DEFAULT, MCW_PC, 
                                     &control_word_x87, 0 );
    printf( "Default:  0x%.4x\n", control_word_x87 );
    printf( "%1.1f * %1.1f = %.15e\n", a, a, a * a );

Original: 0x0001
0.1 * 0.1 = 1.000000000000000e-002
24-bit:   0x0001
0.1 * 0.1 = 9.999999776482582e-003
Default:  0x0001
0.1 * 0.1 = 1.000000000000000e-002

Not applicable. To call the standard C function, use PInvoke. For more information, see Platform Invoke Examples.

© 2016 Microsoft