Export (0) Print
Expand All

6 Appendix B: Product Behavior

The information in this specification is applicable to the following Microsoft products or supplemental software. References to product versions include released service packs:

  • The 2007 Microsoft Office system

  • Microsoft Office 2010 suites

  • Microsoft Office 2013

  • Microsoft Office Online

Exceptions, if any, are noted below. If a service pack or Quick Fix Engineering (QFE) number appears with the product version, behavior changed in that service pack or QFE. The new behavior also applies to subsequent service packs of the product unless otherwise specified. If a product edition appears with the product version, behavior is different in that product edition.

Unless otherwise specified, any statement of optional behavior in this specification that is prescribed using the terms SHOULD or SHOULD NOT implies product behavior in accordance with the SHOULD or SHOULD NOT prescription. Unless otherwise specified, the term MAY implies that the product does not follow the prescription.

<1> Section 2.1.1: This part is available only in Office 2013.

<2> Section 2.1.2: This part is available only in Office 2013.

<3> Section 2.1.3: The Diagram Layout extension is also present in the 2007 Office system Service Pack 2.

<4> Section 2.1.4: If the id attribute is present but the value is not a GUID, then the attribute is ignored and not round-tripped.

<5> Section 2.2.1: This extension is available only in Office 2013.

<6> Section 2.2.1: This extension is available only in Office 2013.

<7> Section 2.2.1: This extension is available only in Office 2013.

<8> Section 2.2.1: This extension is available only in Office 2013.

<9> Section 2.2.1: This extension is available only in Office 2013.

<10> Section 2.2.1.1: This extension is available only in Office 2013.

<11> Section 2.2.1.1: This extension is available only in Office 2013.

<12> Section 2.2.1.1: This extension is available only in Office 2013.

<13> Section 2.2.1.1: This extension is available only in Office 2013.

<14> Section 2.2.1.1: This extension is available only in Office 2013.

<15> Section 2.2.1.1: This extension is available only in Office 2013.

<16> Section 2.2.1.1: This extension is available only in Office 2013.

<17> Section 2.2.1.1: This extension is available only in Office 2013.

<18> Section 2.2.1.1: This extension is available only in Office 2013.

<19> Section 2.2.1.1: This extension is available only in Office 2013.

<20> Section 2.2.1.1: This extension is available only in Office 2013.

<21> Section 2.2.1.1: This extension is available only in Office 2013.

<22> Section 2.2.1.1: This extension is available only in Office 2013.

<23> Section 2.2.1.1: This extension is available only in Office 2013.

<24> Section 2.2.1.1: This extension is available only in Office 2013.

<25> Section 2.2.1.1: This extension is available only in Office 2013.

<26> Section 2.2.1.1: This extension is available only in Office 2013.

<27> Section 2.2.1.1: This extension is available only in Office 2013.

<28> Section 2.2.1.1: This extension is available only in Office 2013.

<29> Section 2.2.1.1: This extension is available only in Office 2013.

<30> Section 2.2.1.1: This extension is available only in Office 2013.

<31> Section 2.2.1.1: This extension is available only in Office 2013.

<32> Section 2.2.1.2: This extension is available only in Office 2013.

<33> Section 2.2.1.3: This extension is available only in Office 2013.

<34> Section 2.2.7.1: This integration is available only in Office 2013.

<35> Section 2.2.7.2: This integration is available only in Office 2013.

<36> Section 2.2.9.1: This integration is available only in Office 2013.

<37> Section 2.2.9.2: This integration is available only in Office 2013.

<38> Section 2.2.10: This extension is available only in Office Online.

<39> Section 2.2.10: This extension is available only in Office Online.

<40> Section 2.3.1.2: Excel 2010 does not delete this shape when loading.

<41> Section 2.5.3.1: Office 2010 requires that the macro attribute follow the same grammar as name references ([ISO/IEC29500-1:2012] section M.2.16.6), with a minimum length of zero characters and a maximum length of 256 characters.

<42> Section 2.6.1.1: This element is available only in Office 2013.

<43> Section 2.6.1.2: This element is available only in Office 2013.

<44> Section 2.6.1.3: This element is available only in Office 2013.

<45> Section 2.6.1.4: This element is available only in Office 2013.

<46> Section 2.6.1.5: This element is available only in Office 2013.

<47> Section 2.6.1.6: This element is available only in Office 2013.

<48> Section 2.6.1.7: This element is available only in Office 2013.

<49> Section 2.6.1.8: This element is available only in Office 2013.

<50> Section 2.6.1.9: This element is available only in Office 2013.

<51> Section 2.6.1.10: This element is available only in Office 2013.

<52> Section 2.6.1.11: This element is available only in Office 2013.

<53> Section 2.6.1.12: This element is available only in Office 2013.

<54> Section 2.6.1.13: This element is available only in Office 2013.

<55> Section 2.6.1.14: This element is available only in Office 2013.

<56> Section 2.6.1.16: This element is available only in Office 2013.

<57> Section 2.6.1.17: The child elements of CT_ManualLayout ([ISO/IEC29500-1:2012] section A.5.1) other than w (Width) and h (Height) are ignored for a Datalabel object (section 2.2.1.3). The child elements of CT_ManualLayout ([ISO/IEC29500-1:2012] section A.5.1) other than x (Left), y (Top), w (Width) and h (Height) are ignored for a parent Datalabels object (section 2.2.1.2).

<58> Section 2.6.1.17: This element is available only in Office 2013.

<59> Section 2.6.1.18: This element is available only in Office 2013.

<60> Section 2.6.1.19: This element is available only in Office 2013.

<61> Section 2.6.1.20: This element is available only in Office 2013.

<62> Section 2.6.1.21: This element is available only in Office 2013.

<63> Section 2.6.1.22: This element is available only in Office 2013.

<64> Section 2.6.1.23: This element is available only in Office 2013.

<65> Section 2.6.1.24: This element is available only in Office 2013.

<66> Section 2.6.1.25: This element is available only in Office 2013.

<67> Section 2.6.1.26: This element is available only in Office 2013.

<68> Section 2.6.3.1: This complex type is available only in Office 2013.

<69> Section 2.6.3.2: This type is available only in Office 2013.

<70> Section 2.6.3.3: This complex type is available only in Office 2013.

<71> Section 2.6.3.4: This complex type is available only in Office 2013.

<72> Section 2.6.3.5: This type is available only in Office 2013.

<73> Section 2.6.3.6: This type is available only in Office 2013.

<74> Section 2.6.3.7: This type is available only in Office 2013.

<75> Section 2.6.3.8: This type is available only in Office 2013.

<76> Section 2.6.3.9: This type is available only in Office 2013.

<77> Section 2.6.3.10: This type is available only in Office 2013.

<78> Section 2.6.3.11: This type is available only in Office 2013.

<79> Section 2.6.3.12: This type is available only in Office 2013.

<80> Section 2.6.3.13: This type is available only in Office 2013.

<81> Section 2.6.3.14: This type is available only in Office 2013.

<82> Section 2.6.3.15: This complex type is available only in Office 2013.

<83> Section 2.6.3.16: This complex type is available only in Office 2013.

<84> Section 2.6.3.17: This complex type is available only in Office 2013.

<85> Section 2.6.3.18: This complex type is available only in Office 2013.

<86> Section 2.7.3.5: Office Excel 2007 does not ignore the CT_Style element([ISO/IEC29500-4:2012] section A.5.1).

<87> Section 2.8.1.1: This element is available only in Office 2013.

<88> Section 2.8.1.2: This element is available only in Office 2013.

<89> Section 2.8.3.1: This type is available only in Office 2013.

<90> Section 2.8.3.2: This type is available only in Office 2013.

<91> Section 2.8.3.3: This type is available only in Office 2013.

<92> Section 2.8.3.4: This type is available only in Office 2013.

<93> Section 2.8.3.5: This type is available only in Office 2013.

<94> Section 2.8.3.6: This type is available only in Office 2013.

<95> Section 2.8.3.7: This type is available only in Office 2013.

<96> Section 2.8.3.8: This type is available only in Office 2013.

<97> Section 2.8.4.1: This type is available only in Office 2013.

<98> Section 2.8.4.2: This type is available only in Office 2013.

<99> Section 2.8.4.3: This type is available only in Office 2013.

<100> Section 2.8.4.4: This type is available only in Office 2013.

<101> Section 2.8.4.5: This type is available only in Office 2013.

<102> Section 2.8.4.6: This type is available only in Office 2013.

<103> Section 2.8.4.7: This type is available only in Office 2013.

<104> Section 2.8.4.8: This type is available only in Office 2013.

<105> Section 2.8.4.9: This type is available only in Office 2013.

<106> Section 2.8.4.10: This type is available only in Office 2013.

<107> Section 2.8.4.11: This type is available only in Office 2013.

<108> Section 2.8.4.12: This type is available only in Office 2013.

<109> Section 2.9.1.1: CT_NonVisualDrawingProps ([ISO/IEC29500-1:2012] section A.4.1) contains attributes id and hidden, which are ignored by Office 2010 for diagram shapes.

<110> Section 2.12.1.1: This element is available only in Office 2013.

<111> Section 2.12.1.2: This element is available only in Office 2013.

<112> Section 2.12.1.3: This element is available only in Office 2013.

<113> Section 2.12.1.4: This element is available only in Office 2013.

<114> Section 2.12.3.1: This type is available only in Office 2013.

<115> Section 2.12.3.2: This type is available only in Office 2013.

<116> Section 2.12.3.3: This type is available only in Office 2013.

<117> Section 2.12.3.4: This type is available only in Office 2013.

<118> Section 2.12.4.1: This type is available only in Office 2013.

<119> Section 2.14.3.3: In Word 2010 a CT_WordprocessingShape that is directly contained by a wpc element and does not have a cNvPr child element.

<120> Section 2.14.3.3: In Word 2010, the spPr element is required to have either a custGeom element ([ISO/IEC29500-1:2012] section 20.1.9.8) or a prstGeom element ([ISO/IEC29500-1:2012] section 20.1.9.18) as a child element.

<121> Section 2.17.3.2: In Word 2010, an instantiation of the scene3D element ([ISO/IEC29500-1:2012] section 20.1.4.1.26) in an outer group takes precedence over scene3D instantiated in any inner shapes or groups.

<122> Section 2.17.3.2: Word 2010 does not support this child element on a CT_WordprocessingGroup if the group contains a CT_WordprocessingCanvas as an ancestor.

<123> Section 2.18.3.1: Word 2010 does not support this child element on a CT_WordprocessingCanvas.

<124> Section 2.19.3.1: Word 2010 supports only positive values for this element.

<125> Section 2.19.3.2: Word 2010 supports only positive values for this element.

<126> Section 2.21.3.1: Office 2010 requires that the macro attribute follow the same grammar as name references ([ISO/IEC29500-1:2012] section M.2.16.6), with a minimum length of zero characters and a maximum length of 256 characters.

Show:
© 2015 Microsoft