Share via


Include a One-Way External Service Endpoint

 

Important

Microsoft Azure BizTalk Services (MABS) is being retired, and replaced with Azure Logic Apps. If you currently use MABS, then Move from BizTalk Services to Logic Appsprovides some guidance on moving your integration solutions to Logic Apps.

If you're brand new to Logic Apps, then we suggest getting started here:

Add a one-way external service endpoint to a BizTalk Service project. Use this destination to route a message to a WCF external service that takes a request but does not return a response.

Important

The service you wish to represent as part of the BizTalk Service project must already be configured. You cannot configure a service as part of the BizTalk Service project.

Secure Message Transfer between the Bridge and the Service Endpoint

In scenarios involving message transfer between WCF client and services, both the client and service authentication is mandated. In routing scenarios where a bridge sends a message to a WCF service, the bridge is the client and the WCF endpoint where the message is routed to is the service. BizTalk Services provides support for using certificates to authenticate both the client and the service. This support is limited to services with basicHttpBinding and ws2007HttpBinding.

The security configuration and the certificate information must be included in the binding and service behavior configuration sections service’s configuration file. Also, the client’s certificate must be available in the artifact store for the BizTalk Services subscription where the bridge (that sends the message to the service endpoint) eventually gets deployed. To upload the certificate to the artifact store, see Certificates.

Important

The certificate must be available in the artifact store before you deploy the bridge. To ensure that the bridge gets deployed successfully, after uploading the certificate, wait for 30 seconds before deploying the bridge.

At a very high-level, these are the steps that you must perform to enable certificate authentication between the bridge and the WCF service endpoint:

  • As part of your service configuration, add a new binding configuration to use certificate-based security.

  • Add a new service behavior configuration and include the configuration information about the client’s and server’s certificate.

Adding a One-way External Service Endpoint

  1. Create a BizTalk Service project, as described in Get started with a Visual Studio project.

  2. Right-click anywhere on the BizTalk Service project design area, select Properties. For the BizTalk Service URL property, enter your BizTalk Services URL.

  3. From the Toolbox, drag and drop the One-Way External Service Endpoint component to the BizTalk Service project design area.

    Note

    This adds a configuration file to the BizTalk Service project. For more information about the configuration file, see No text is specified for bookmark or legacy link '6508218b-9eb9-40e1-a9d5-fcc056651e03#BKMK_config'..

  4. Right-click the component, and then select Properties. The following table provides information about the properties:

    Property Name

    Description

    Associated Project Item

    This is a read-only field and provides the name of the associated .config file. If you change the name of the component on the BizTalk Service project design area by changing the No text is specified for bookmark or legacy link '6508218b-9eb9-40e1-a9d5-fcc056651e03#EntityName'. property, the name of the .config file also changes.

    Endpoint Configuration Name

    Name of the client endpoint configuration in the .config file that defines the address, binding, and contract for the WCF service that you are representing on the BizTalk Service project design area. Because the service configuration file can have any number of endpoints defined, the endpoint name you specify for this property is matched with the endpoint configuration name in the .config file. When a match happens, the corresponding address, binding, and contract for that endpoint are considered.

    Important

    The value you enter for this property is not used for updating the name attribute of the endpoint element in the associated .config file.

    Important

    You must ensure that the associated .config file has at least one endpoint defined with the name you enter here. You can either update the .config manually to create the endpoint or use the Service Configuration Editor, as explained in No text is specified for bookmark or legacy link '6508218b-9eb9-40e1-a9d5-fcc056651e03#ServiceConfigEditor'..

    Entity Name

    The name of the external service component on the BizTalk Service project design area. This name should be unique for a BizTalk Service project.

    Runtime Address

    The public runtime endpoint URL where the external service is deployed.

    1. When you drop the One-Way External Service Endpoint component on the BizTalk Service project design area, it adds a configuration file with the same name as the value you provided for the Entity Name. This configuration file must be updated to provide information about the external service’s client endpoint such as the service binding and service contract. Perform the following steps to update the configuration file:

      1. From the Solution Explorer, right-click the .config file for the One-Way External Service Endpoint component, and then select Edit WCF Configuration to open the Service Configuration Editor.

      2. Expand Endpoints node under the Client node in the Tree View pane, to see the default endpoint already created. Select the default endpoint and in the Client Endpoint details pane, in the General tab, enter the following properties:

        Property Name

        Description

        Name

        Update the endpoint configuration name, for example, OneWayExternalService.

        Important

        Whatever value you enter here, you must enter the same value for the No text is specified for bookmark or legacy link '6508218b-9eb9-40e1-a9d5-fcc056651e03#BKMK_EndpointConfig'. property.

        Address

        The complete address where the external one-way service is hosted, for example, https://MyServices/myOneWayExternalService.

        BehaviorConfiguration

        If you want to include a custom endpoint behavior configuration, and if you already have it configured as part of the Service Configuration Editor under the Endpoint Behaviors node, you can select that from the drop-down list. For instructions on how to add a behavior configuration, see To add a behavior configuration.

        Binding

        Specifies the type of binding you want to use for the endpoint. For example, for a WCF external service endpoint, you can choose basicHttpBinding.

        BindingConfiguration

        Using this you can enter more details about the binding such as security requirements, and so on. If you want to include a binding configuration, and if you already have it configured as part of the Service Configuration Editor under the Bindings node, you can select that from the drop-down list. For instructions on how to add a binding configuration, see To add a binding configuration.

        Contract

        Enter the contract for the service. For a WCF one-way external service, the contract must be System.ServiceModel.Routing.ISimplexDatagramRouter.

        3. From the File menu, select **Save**, and select **Exit**. 4. Open the configuration file and verify that the values you entered in the Service Configuration Editor are reflected in the configuration file. A sample configuration file for an external one-way service endpoint would look like the following:

        To add a behavior configuration

        1. In the Service Configuration Editor, from the Tree View pane, expand Advanced, right-click Endpoint Behaviors, and then select New Endpoint Behavior Configuration.

        2. In the Behavior details pane, enter a name for the behavior, for example, ServiceCredentialBehavior. The same name is available in the BehaviorConfiguration drop-down list in Step 4(b) above.

        3. In the Behavior element extension position area, select Add, from the Available Elements box, select the element that you want to add (e.g. clientCredentials), and then select Add again. This adds the clientCredentials behavior extension in the tree structure.

        4. Expand the clientCredentials section and specify the required properties for clientCertificate and serviceCertificate.

        5. In the Tree View pane, go back to the service endpoint that you created, and select the newly created endpoint behavior configuration from the BehaviorConfiguration drop-down list.

        To add a binding configuration

        1. In the Service Configuration Editor, from the Tree View pane, right-click Bindings, and then select New Binding Configuration.

        2. In the Create a New Binding box, select the same binding that you specified in Step 4(b) above, and then select OK.

        3. In the binding details pane, on the Binding tab, for the Name property, enter a name for the binding configuration, for example ServiceBinding. The same name is available in the BindingConfiguration drop-down list in Step 4 (b) above.

        4. In the binding details pane, on the Security tab, for the Mode drop-down list, select Message and for the MessageClientCredentialType option, select Certificate.

        5. In the Tree View pane, go back to the service endpoint that you created, and select the newly created binding configuration from the BindingConfiguration drop-down list.

        6. If you save and exit the configuration editor now, and open the configuration file in an XML editor, you notice that the following has been added to the service configuration file. This excerpt assumes that the binding you selected was basicHttpBinding:

          <bindings>
                <basicHttpBinding>
                  <binding name="ServiceBinding">
                    <security mode="Message">
                      <message clientCredentialType="Certificate" />
                    </security>
                  </binding>
                </basicHttpBinding>
          </bindings>
          

        See Also

        Add a Message Destination to the bridge