Share via


Connecting the CETK to a Target Device by Using Platform Manager

Other versions of this page are also available for the following:

Windows Mobile SupportedWindows Embedded CE Supported

8/27/2008

Using Platform Manager, you can download to a target device the appropriate Clientside.exe file for the CPU. You can specify whether the Windows Embedded CE 6.0 Test Kit (CETK) uses Platform Manager or Winsock to communicate with the target device after Platform Manager downloads Clientside.exe.

Alternately, you can connect the CETK to a target device manually. For information about manually establishing a connection, see Running the CETK Tool without the CETK Client in the Run-Time Image.

To connect the CETK to a target device by using Platform Manager

  1. In the CETK window, from the Connection menu, choose Start client.

  2. To instruct the CETK to communicate with the target device by using Platform Manager, clear the Use Windows Sockets for the client/server communication check box.

    - or -

    To instruct the CETK to communicate with the target device by using Winsock, select the Use Windows Sockets for the client/server communication check box.

    Note

    Regardless of the state of the Use Windows Sockets for the client/server communication check box, when you choose Connect, the CETK downloads Clientside.exe to the target device by using Platform Manager.

  3. Choose Settings to configure Platform Manager.

    In the Windows Embedded CE Platform Manager Configuration dialog box, you can configure Platform Manager to communicate with the target device. For information about configuring this connection, see Configuring a Core Connection to a Target Device.

  4. Choose OK to close the Windows Embedded CE Platform Manager Configuration dialog box.

  5. Choose Connect.

  6. Select a target device, and then choose OK.

See Also

Reference

Device Connection Dialog Box

Other Resources

CETK Setup
How to Use the CETK to Test a Driver
Manual Connection of the CETK to a Target Device