How to Use the BSP for the Texas Instruments SDP2420 Development Board
Other versions of this page are also available for the following:
.gif "A hyphen indicates that the information in this topic is not relevant for this platform, or that the platform does not support the API that is listed.")
.gif "A checkmark indicates that the information in this topic is relevant for this platform, and that any API listed is also supported on this platform.")
8/27/2008
You can use the sample board support package (BSP) provided by Microsoft to quickly evaluate Windows Embedded CE 6.0 features on the Texas Instruments SDP2420 Development Board.
For more information about the sample BSPs included in Windows Embedded CE for ARM microprocessors, see ARM BSPs.
Hardware and Software Assumptions
- You have installed Platform Builder for Windows Embedded CE 6.0. The latest Platform Builder tools are hosted in the Visual Studio 2005 shell.
- You included support for ARMV4I microprocessors when you installed Platform Builder.
If you did not, reinstall Platform Builder and include support for ARMV4I. - You are downloading a Windows Embedded CE-based debug or release run-time image to a Texas Instruments SDP2420 Development Board.
- You have downloaded and installed the OMAP Software Tools from the TI Web site.
To use the BSP for the Texas Instruments SDP2420 Development Board, follow the steps in the table below.
| Step | Topic |
|---|---|
1. From the Windows Embedded CE 6.0 OS Design Wizard, select the H4Sample OMAP2420: ARMV4I BSP. |
|
2. Review the supported hardware and software features on the development platform and familiarize yourself with limitations that can affect your run-time image on the device. |
Texas Instruments SDP2420 Development Board Supported Features |
3. Set up the development platform hardware. |
Setting Up the Texas Instruments SDP2420 Development Board Hardware |
4. Modify the switch and jumper settings on the mainboard, daughtercard, and debug board. |
Modifying the Texas Instruments SDP2420 Development Board Switches and Jumpers |
5. Build the run-time image. You must build the run-time image before you can download it to the development platform. |
|
6. Download the boot loader to the development platform. |
Downloading the Boot Loader to the Texas Instruments SDP2420 Development Board |
7. Download the run-time image to the development platform. |
Downloading the Run-Time Image to the Texas Instruments SDP2420 Development Board |