Test Case Descriptions for the Graphics Device Interface Printing Test (Windows CE 5.0)
The following table shows the test cases for the Graphics Device Interface Printing Test.
| Test case | Description |
|---|---|
| 100: BitBlt_T | This test is to verify the functionality of BitBlt with various source bitmaps. It has four subtests within it, so there should be four sets of images and instructions on the page.
Test 1: This test verifies the functionality of BitBlt. This image should be a 1bpp picture of a puppy. As 1bpp only has black and white, the expected image is mostly black with a few white highlights from the grass and outlines of the puppy. Test 2: This test verifies the functionality of BitBlt. This image should be a 4bpp picture of a puppy; it should contain color if color was selected as a print option. Test 3: This test verifies the functionality of BitBlt. This image should be a 8bpp picture of a puppy, it should contain color if color was selected as a print option. Test 4: This test verifies the functionality of BitBlt. This image should be a 24bpp picture of a puppy; it should contain color if color was selected as a print option. |
| 101: MaskBlt_T | This test verifies the functionality of MaskBlt using three different ROP4 operations. There should be three sets of images and instructions on the page.
Test 1: This test verifies the functionality of MaskBlt. The bitmap on the left should match the bitmap on the right, have no artifacts in the inerior, and be in color if color was selected as a print option. Test 2: This test verifies the functionality of MaskBlt. The bitmap on the left should match the bitmap on the right, and have a set of diagonal boxes from each of the corners; the boxes should be in blue if color was selected. Test 3: This test verifies the functionality of MaskBlt. The bitmap on the left should match the bitmap on the right, and the box should be mostly blue with portions of the puppy picture in the diagonal boxes across the square. |
| 102: StretchBlt_T | This test verifies the functionality of StretchBlt using 4 different source bitmaps and with both stretching and shrinking. There should be 8 sets of images and instructions on the page.
Test 1: This test verifies the functionality of StretchBlt. This image should be a 1bpp picture of a puppy, and it should be 1/2 the size of the image on the right. As 1bpp only has black and white, the expected image is mostly black with a few white highlights from the grass and outlines of the puppy. Test 2: This test verifies the functionality of StretchBlt. This image should be a 4bpp picture of a puppy, it should be 1/2 the size of the image on the right, and it should contain color if color was selected as a print option. Test 3: This test verifies the functionality of StretchBlt. This image should be a 8bpp picture of a puppy, it should be 1/2 the size of the image on the right, and it should contain color if color was selected as a print option. Test 4: This test verifies the functionality of StretchBlt. This image should be a 24bpp picture of a puppy, it should be 1/2 the size of the image on the right, and it should contain color if color was selected as a print option. Test 5: This test verifies the functionality of StretchBlt. This image should be a 1bpp picture of a puppy, and it should be 2x the size of the image on the right. As 1bpp only has black and white, the expected image is mostly black with a few white highlights from the grass and outlines of the puppy. Test 6: This test verifies the functionality of StretchBlt. This image should be a 4bpp picture of a puppy, it should be 2x the size of the image on the right, and it should contain color if color was selected as a print option. Test 7: This test verifies the functionality of StretchBlt. This image should be a 8bpp picture of a puppy, it should be 2x the size of the image on the right, and it should contain color if color was selected as a print option. Test 8: This test verifies the functionality of StretchBlt. This image should be a 24bpp picture of a puppy, it should be 2x the size of the image on the right, and it should contain color if color was selected as a print option. |
| 103: PatBlt_T | This test verifies the functionality of PatBlt using three different raster operations. There should be three sets of images and instructions on the page.
Test 1: This test verifies the functionality of PatBlt. The left should match the right. This should be a black box. Test 2: This test verifies the functionality of PatBlt. The left should match the right and this should be a white box (empty). Test 3: This test verifies the functionality of PatBlt. The left should match the right, and it should be four pictures of the puppy laid out in a tiled wallpaper fashion. |
| 104: TransparentBlt_T | This test verifies the functionality of TransparentBlt using five different transparent colors. There should be five sets of images and instructions on the page.
Test 1: This test verifies the functionality of TransparentBlt. The left image should match the right, and there should be four squares of color. If color printing was enabled, going clockwise the colors should be black, red, blue, and green. Test 2: This test verifies the functionality of TransparentBlt. The left image should match the right, and there should be three squares of color with the upper left square (black) missing. Test 3: This test verifies the functionality of TransparentBlt. The left image should match the right, and there should be three squares of color, with the upper right square (red) missing. Test 4: This test verifies the functionality of TransparentBlt. The left image should match the right, and there should be three squares of color, with the upper lower left (green) missing. Test 5: This test verifies the functionality of TransparentBlt. The left image should match the right, and there should be three squares of color, with the lower right square (blue) missing. |
| 105: AlphaBlend_T | This test verifies the functionality of AlphaBlend using five different levels of source constant alpha blending. There should be five sets of images and instructions on the page.
Test 1: This test verifies the functionality of AlphaBlend. The left image should match the right, and it should be an opaque picture of a puppy. Test 2: This test verifies the functionality of AlphaBlend. The left image should match the right, and it should be a 75% opaque picture of a puppy. Test 3: This test verifies the functionality of AlphaBlend. The left image should match the right, and it should be a 50% opaque picture of a puppy. Test 4: This test verifies the functionality of AlphaBlend. The left image should match the right, and it should be a 25% opaque picture of a puppy. Test 5: This test verifies the functionality of AlphaBlend. The left image should match the right, and it should be an empty area from a 0% opaque (100% transparent) picture of a puppy. |
| 106: StretchDlBits_T | This test verifies the functionality of StretchDIBits using 23 different Device Independent Bitmaps as the source. There should be 23 sets of images and instructions on the page.
Test 1: This test verifies the functionality of StretchDIBits. This is testing a 16bpp BI_RGB DIB to the printer; the left image should match the right. Test 2: This test verifies the functionality of StretchDIBits. This is testing a 16bpp RGB4444 DIB to the printer; the left image should match the right. Test 3: This test verifies the functionality of StretchDIBits. This is testing a 16bpp RGB565 DIB to the printer; the left image should match the right. Test 4: This test verifies the functionality of StretchDIBits. This is testing a 16bpp RGB555 DIB to the printer; the left image should match the right. Test 5: This test verifies the functionality of StretchDIBits. This is testing a 16bpp RGB1555 DIB to the printer; the left image should match the right. Test 6: This test verifies the functionality of StretchDIBits. This is testing a 16bpp BGR4444 DIB to the printer; the left image should match the right. Test 7: This test verifies the functionality of StretchDIBits. This is testing a 16bpp BGR565 DIB to the printer; the left image should match the right. Test 8: This test verifies the functionality of StretchDIBits. This is testing a 16bpp BGR555 DIB to the printer; the left image should match the right. Test 9: This test verifies the functionality of StretchDIBits. This is testing a 16bpp BGR1555 DIB to the printer; the left image should match the right. Test 10: This test verifies the functionality of StretchDIBits. This is testing a 24bpp BI_RGB DIB to the printer; the left image should match the right. Test 11: This test verifies the functionality of StretchDIBits. This is testing a 32bpp BI_RGB DIB to the printer; the left image should match the right. Test 12: This test verifies the functionality of StretchDIBits. This is testing a 32bpp RGB8888 DIB to the printer; the left image should match the right. Test 13: This test verifies the functionality of StretchDIBits. This is testing a 32bpp RGB888 DIB to the printer; the left image should match the right. Test 14: This test verifies the functionality of StretchDIBits. This is testing a 32bpp BGR8888 DIB to the printer; the left image should match the right. Test 15: This test verifies the functionality of StretchDIBits. This is testing a 32bpp BGR888 DIB to the printer; the left image should match the right. Test 16: This test verifies the functionality of StretchDIBits. This is testing a 1bpp DIB_PAL_COLORS DIB to the printer; the left image should match the right. The image should be mostly black with a few white specks. Test 17: This test verifies the functionality of StretchDIBits. This is testing a 2bpp DIB_PAL_COLORS DIB to the printer; the left image should match the right. Due to the limited colors in a 2bpp surface, this only has a bare resemblance to a puppy. Test 18: This test verifies the functionality of StretchDIBits. This is testing a 4bpp DIB_PAL_COLORS DIB to the printer; the left image should match the right. Test 19: This test verifies the functionality of StretchDIBits. This is testing a 8bpp DIB_PAL_COLORS DIB to the printer; the left image should match the right. Test 20: This test verifies the functionality of StretchDIBits. This is testing a 1bpp user-paletted DIB to the printer; the left image should match the right. The images should be mostly black with a few white specks. Test 21: This test verifies the functionality of StretchDIBits. This is testing a 2bpp user-paletted DIB to the printer; the left image should match the right. This should be a black box. Test 22: This test verifies the functionality of StretchDIBits. This is testing a 4bpp user-paletted DIB to the printer; the left image should match the right. This should be a grayscale picture of the puppy. Test 23: This test verifies the functionality of StretchDIBits. This is testing a 8bpp user-paletted DIB to the printer; the left image should match the right. This should be a grayscale picture of the puppy. |
| 107: SetDlBitsToDevice_T | This test verifies the functionality of SetDIBitsToDevice using 23 different Device Independent Bitmaps as the source. There should be 23 sets of images and instructions on the page.
Test 1: This test verifies the functionality of SetDIBitsToDevice. This is testing a 16bpp BI_RGB DIB to the printer; the left image should match the right. Test 2: This test verifies the functionality of SetDIBitsToDevice. This is testing a 16bpp RGB4444 DIB to the printer; the left image should match the right. Test 3: This test verifies the functionality of SetDIBitsToDevice. This is testing a 16bpp RGB565 DIB to the printer; the left image should match the right. Test 4: This test verifies the functionality of SetDIBitsToDevice. This is testing a 16bpp RGB555 DIB to the printer; the left image should match the right. Test 5: This test verifies the functionality of SetDIBitsToDevice. This is testing a 16bpp RGB1555 DIB to the printer; the left image should match the right. Test 6: This test verifies the functionality of SetDIBitsToDevice. This is testing a 16bpp BGR4444 DIB to the printer; the left image should match the right. Test 7: This test verifies the functionality of StretchDIBits. This is testing a 16bpp BGR565 DIB to the printer; the left image should match the right. Test 8: This test verifies the functionality of SetDIBitsToDevice. This is testing a 16bpp BGR555 DIB to the printer; the left image should match the right. Test 9: This test verifies the functionality of SetDIBitsToDevice. This is testing a 16bpp BGR1555 DIB to the printer; the left image should match the right. Test 10: This test verifies the functionality of SetDIBitsToDevice. This is testing a 24bpp BI_RGB DIB to the printer; the left image should match the right. Test 11: This test verifies the functionality of SetDIBitsToDevice. This is testing a 32bpp BI_RGB DIB to the printer; the left image should match the right. Test 12: This test verifies the functionality of SetDIBitsToDevice. This is testing a 32bpp RGB8888 DIB to the printer; the left image should match the right. Test 13: This test verifies the functionality of SetDIBitsToDevice. This is testing a 32bpp RGB888 DIB to the printer; the left image should match the right. Test 14: This test verifies the functionality of SetDIBitsToDevice. This is testing a 32bpp BGR8888 DIB to the printer; the left image should match the right. Test 15: This test verifies the functionality of SetDIBitsToDevice. This is testing a 32bpp BGR888 DIB to the printer; the left image should match the right. Test 16: This test verifies the functionality of SetDIBitsToDevice. This is testing a 1bpp DIB_PAL_COLORS DIB to the printer; the left image should match the right. The image should be mostly black with a few white specks. Test 17: This test verifies the functionality of SetDIBitsToDevice. This is testing a 2bpp DIB_PAL_COLORS DIB to the printer; the left image should match the right. Due to the limited colors in a 2bpp surface, this only has a bare resemblance to a puppy. Test 18: This test verifies the functionality of SetDIBitsToDevice. This is testing a 4bpp DIB_PAL_COLORS DIB to the printer; the left image should match the right. Test 19: This test verifies the functionality of SetDIBitsToDevice. This is testing a 8bpp DIB_PAL_COLORS DIB to the printer; the left image should match the right. Test 20: This test verifies the functionality of SetDIBitsToDevice. This is testing a 1bpp user-paletted DIB to the printer; the left image should match the right. The images should be mostly black with a few white specks. Test 21: This test verifies the functionality of SetDIBitsToDevice. This is testing a 2bpp user-paletted DIB to the printer; the left image should match the right. This should be a black box. Test 22: This test verifies the functionality of SetDIBitsToDevice. This is testing a 4bpp user-paletted DIB to the printer; the left image should match the right. This should be a grayscale picture of the puppy. Test 23: This test verifies the functionality of SetDIBitsToDevice. This is testing a 8bpp user-paletted DIB to the printer; the left image should match the right. This should be a grayscale picture of the puppy. |
| 108: GradientFill_T | This test verifies the functionality of GradientFill using six different gradients. There should be six sets of images and instructions on the page.
Test 1: This test verifies the functionality of GradientFill. The left image should match the right. This should be a solid black box Test 2: This test verifies the functionality of GradientFill. The left image should match the right. This should be a black to white gradient changing from left to right. Test 3: This test verifies the functionality of GradientFill. The left image should match the right. This should be a red to green gradient changing from left to right. Test 4: This test verifies the functionality of GradientFill. The left image should match the right. This should be a solid black box Test 5: This test verifies the functionality of GradientFill. The left image should match the right. This should be a black to white gradient changing from top to bottom. Test 6: This test verifies the functionality of GradientFill. The left image should match the right. This should be a red to green gradient changing from top to bottom. |
| 109: FillRect_T | This test verifies the functionality of FillRect using two different gradients. There should be two sets of images and instructions on the page.
Test 1: This test verifies the functionality of FillRect. The image to the left should match the image to the right, and be a red box if color printing was enabled. Test 2: This test verifies the functionality of FillRect. The image to the left should match the image to the right, and be a tiled picture of a puppy. |
| 110: PolyLine_T | This test verifies the functionality of PolyLine using three different gradients. There should be three sets of images and instructions on the page.
Test 1: This test verifies the functionality of PolyLine. The image on the left should match the image on the right, the image should be a triangle with a thin black pen and an empty interior. Test 2: This test verifies the functionality of PolyLine. The image on the left should match the image on the right, the image should be a triangle with a thin red dashed pen and an empty interior. Test 3: This test verifies the functionality of PolyLine. The image on the left should match the image on the right, the image should be a triangle with a wide pen, it should be white on a black background. |
| 111: Polygon_T | This test verifies the functionality of Polygon using four different gradients. There should be four sets of images and instructions on the page.
Test 1: This test verifies the functionality of Polygon. The image on the left should match the image on the right; the image should be a triangle with a thin black pen and a puppy-filled interior. Test 2: This test verifies the functionality of Polygon. The image on the left should match the image on the right; the image should be a triangle with a thin green pen and a solid interior. Test 3: This test verifies the functionality of Polygon. The image on the left should match the image on the right; the image should be a triangle with a thin dashed pen and a puppy-filled interior. Test 4: This test verifies the functionality of Polygon. The image on the left should match the image on the right, the image should be a triangle with a wide blue pen, it should be on a green background, and have a puppy-filled interior. |
| 112: LineTo_T | This test verifies the functionality of LineTo using three different gradients. There should be three sets of images and instructions on the page.
Test 1: This test verifies the functionality of MoveTo/LineTo. The image on the left should match the image on the right; the image should be a triangle with a thin black pen and an empty interior. Test 2: This test verifies the functionality of MoveTo/LineTo. The image on the left should match the image on the right; the image should be a triangle with a thin red dashed pen and an empty interior. Test 3: This test verifies the functionality of MoveTo/LineTo. The image on the left should match the image on the right; the image should be a triangle with a wide pen. It should be white on a black background. |
| 113: Rectangle_T | This test verifies the functionality of Rectangle using four different gradients. There should be four sets of images and instructions on the page.
Test 1: This test verifies the functionality of Rectangle. The image on the left should match the image on the right; the image should be a rectangle with a thin black pen and a puppy-filled interior. Test 2: This test verifies the functionality of Rectangle. The image on the left should match the image on the right; the image should be a rectangle with a thin green pen and a solid red-filled interior. Test 3: This test verifies the functionality of Rectangle. The image on the left should match the image on the right; the image should be a rectangle with a thin dashed pen and a puppy-filled interior. Test 4: This test verifies the functionality of Rectangle. The image on the left should match the image on the right; the image should be a rectangle with a wide blue pen on a green background with a puppy-filled interior. |
| 114: RoundRect_T | This test verifies the functionality of RoundRect using four different gradients. There should be four sets of images and instructions on the page.
Test 1: This test verifies the functionality of RoundRect. The image on the left should match the image on the right; the image should be a rounded rectangle with a thin black pen and a puppy-filled interior. Test 2: This test verifies the functionality of RoundRect. The image on the left should match the image on the right; the image should be a rounded rectangle with a thin green pen and a solid red-filled interior. Test 3: This test verifies the functionality of RoundRect. The image on the left should match the image on the right; the image should be a rounded rectangle with a thin dashed pen and a puppy-filled interior. Test 4: This test verifies the functionality of RoundRect. The image on the left should match the image on the right, the image should be a rounded rectangle with a wide blue pen on a green background, with a puppy-filled interior. |
| 115: Ellipse_T | This test verifies the functionality of Ellipse using four different gradients. There should be four sets of images and instructions on the page.
Test 1: This test verifies the functionality of Ellipse. The image on the left should match the image on the right; the image should be a circle with a thin black pen and a puppy-filled interior. Test 2: This test verifies the functionality of Ellipse. The image on the left should match the image on the right; the image should be a circle with a thin green pen and a solid red-filled interior. Test 3: This test verifies the functionality of Ellipse. The image on the left should match the image on the right; the image should be a circle with a thin dashed pen and a puppy-filled interior. Test 4: This test verifies the functionality of Ellipse. The image on the left should match the image on the right; the image should be a circle with a wide blue pen on a green background and a puppy-filled interior. |
| 116: DrawText_T | This test verifies the functionality of DrawText using three different gradients. There should be three sets of images and instructions on the page.
Test 1: This test verifies the functionality of DrawText. The string "Test String" should be printed on the page. Please also verify that the left half of the page matches the right half. It should be black text on a white background. Test 2: This test verifies the functionality of DrawText. The string "Test String" should be printed on the page. Please also verify that the left half of the page matches the right half. It should be white text on a black background. Test 3: This test verifies the functionality of DrawText. The string "Test String" should be printed on the page. Please also verify that the left half of the page matches the right half. It should be green text on a fuchsia background. |
| 117: ExtTextOut_T | This test verifies the functionality of ExtTextOut using three different gradients. There should be three sets of images and instructions on the page.
Test 1: This test verifies the functionality of ExtTextOut. The string "Test String" should be printed on the page. Please also verify that the left half of the page matches the right half. It should be black text on a white background. Test 2: This test verifies the functionality of ExtTextOut. The string "Test String" should be printed on the page. Please also verify that the left half of the page matches the right half. It should be white text on a black background. Test 3: This test verifies the functionality of ExtTextOut. The string "Test String" should be printed on the page. Please also verify that the left half of the page matches the right half. It should be green text on a fuchsia background. |
See also
Graphics Device Interface Printing Test
Send Feedback on this topic to the authors