MSDN Library

NET

application Pause Pending text...
application Stop Pending text...
computer name is not a valid computer name....
day is not a recognized day of the week....
drive letter has a remembered connection to name . Do you want to overw...
drive letter has a remembered connection to path ....
name Continue Pending text...
name is an invalid user or group name....
name is not a valid domain or workgroup name....
parameter errors were logged in the last parameter minutes. Please review the server's error log....
parameter is not a recognized hour....
parameter is not a valid specification for minutes....
parameter network errors occurred in the last parameter minutes. Pleas...
text Install Pending text...
text is not a valid 12-hour suffix....
text is not a valid Windows 2000 network message number....
12 and 24 hour time formats may not be mixed. ...
A bad mailslot server message block (SMB) was received. The SMB is the data. ...
A bad value is in the units-per-week field of the user record. ...
A centralized logon-server conflict occurred. ...
A command was used with conflicting switches. ...
A defective sector on drive drive letter has been replaced (hotfixed). N...
A disk error occurred on the HPFS volume in drive drive letter . The erro...
A disk I/O error occurred. ...
A disk I/O failure occurred. ...
A DosDevIoctl or DosFsCtl to NETWKSTA.SYS failed. The data shown is in thi...
A duplicate message alias exists on the network. ...
A failure occurred when executing a remote administration command. ...
A failure occurred when opening a remote temporary file. ...
A file system error occurred while opening or writing to the system messag...
A general network error occurred. ...
A line in the configuration file is too long. ...
A matching share could not be found so nothing was deleted. ...
A NetWksta internal error has occurred: text...
A network adapter malfunction has occurred. The network control block (NCB...
A network control block (NCB) command timed-out. The session may have ter...
A network control block (NCB) error occurred ( text ). The NCB is the data....
A network control block (NCB) session open was rejected. No LISTEN is outs...
A network error occurred. text...
A network resource shortage occurred . ...
A password mismatch has been detected. ...
A power failure has occurred at computer name . Please terminate all activity with this server....
A power failure was detected at name . The server has been paused....
A power failure was detected at the server. ...
A primary domain controller is already running in this domain. ...
A problem exists with the system configuration. ...
A remote API error occurred. ...
A remote API request was halted due to the following invalid description string: text ....
A request for resource could not be satisfied. ...
A second connection to a Remoteboot resource is not allowed. ...
A server message block (SMB) error occurred on the connection to computer ...
A service specific error occurred: text ....
A session does not exist with that computer name. ...
A spooler memory allocation failure occurred. ...
A system error has occurred. ...
A thread for the new service could not be created. ...
A user's session with this server has been deleted because the user's logon hours are no longer valid. ...
A valid name was not entered. ...
A valid password was not entered. ...
A virtual circuit error occurred on the session to computer name . The ne...
A write fault occurred. ...
A write operation to filename failed. Data may have been lost....
Access denied file system...
Access ended text...
Account locked due to number bad passwords text...
Active connections still exist. ...
Administrator privilege required text...
Administrator stopped sharing resource name text...
An error occured while reading your profile. ...
An error occured while saving your profile. The state of your remembered connections has not changed. ...
An error occurred closing file filename . Please check the file to make sure it is not corrupted....
An error occurred in the domain message processor. ...
An error occurred when attempting to run the service program. ...
An error occurred when communicating with a Run server. ...
An error occurred when opening network device driver name = name ....
An error occurred when opening or reading the configuration file. ...
An error occurred when reading the NETWORKS entry in the LANMAN.INI file. ...
An error occurred when starting a background process. ...
An error occurred when the share was deleted. ...
An error occurred while loading or running the logon script. ...
An error occurred while loading the profile file. ...
An error occurred while opening the Help file. ...
An error occurred while restoring the connection to name ....
An error occurred while sending a message to user name ....
An error occurred while synchronizing with primary domain controller computer name...
An error occurred while updating the logon or logoff information for user name ....
An illegal country/region code has been supplied. ...
An illegal date format has been supplied. ...
An illegal day range has been supplied. ...
An illegal server message block (SMB) was received. The SMB is the data. ...
An illegal time range has been supplied. ...
An internal consistency error has occurred. ...
An internal error occurred while accessing the computer's local or network security database. ...
An internal error occurred. The network cannot access a shared memory segment. ...
An internal Windows 2000 error occurred. ...
An invalid or nonexistent alert name was raised. ...
An unexpected NetBIOS error occurred. The error code is the data. ...
An unexpected network control block (NCB) was received. The NCB is the data. ...
An unexpected protocol packet was received. There may be an incompatible ...
Arguments to NET USER are invalid. Check the minimum password length and/or arguments supplied. ...
Bad or missing LAN Manager root directory. ...
Cannot connect to the Remoteboot server. ...
Cannot log on. User is currently logged on and argument TRYUSER is set to NO. ...
Changing machine account password for account account failed with the following error: text...
Check printer on name name...
Closed text (disconnected) text...
Continuing will cancel the connections. ...
Could not determine the type of input. ...
Could not find a domain controller for domain name ....
Could not find domain controller for this domain. ...
Could not find subprogram name ....
Could not find the domain controller for domain name ....
Could not locate a time-server. ...
Could not set logon information for this user. ...
Deleting a user with a session is not allowed. ...
Device driver time sent a bad BiosLinkage response....
Disk Fault Tolerance Error text...
Do you want to continue this operation? name : text...
Do you want to resume loading the profile? The command which caused the e...
Do you want to start the Workstation service? name : text...
Drive drive letter is nearly full. parameter bytes are available. Plea...
Errors occurred while saving the profile file. The profile was partially saved. ...
EXPORT path path cannot be found....
Failed to authenticate with computer name , a Windows 2000 domain controller for domain name ....
For help on number type NET HELP number...
Force user logoff how long after time expires?: text...
Hanging up a stuck session to computer name ....
IMPORT path path cannot be found....
Incompatible files are installed in the LANMAN tree. ...
Initialization failed because account file filename is either incorrect or not present....
Initialization failed because network name was not started....
Initialization failed because of a system execution failure on path path ...
Initialization failed because of a system execution failure on path path ...
Initialization failed because of an error in the configuration file filename ....
Initialization failed because of an invalid line in the configuration file...
Initialization failed because of an invalid or missing parameter in the configuration file filename ....
Initialization failed because of an open/create error on the file filenam...
Initialization failed because the dynamic-link library name returned an incorrect version number....
Initialization failed because the requested service name could not be started....
Initialization parameters controlling resource usage other than net buffer...
Is it OK to continue disconnecting and force them closed? text : text...
LAN Manager does not recognize " name " as a valid option....
Local security could not be started because an error occurred during initi...
Local security could not be started because the user accounts database (NE...
Log file filename is corrupt....
Log file name is full....
Longterm lock of the server buffers failed. Check swap disk's free space a...
Master computer name did not send an update notice for directory name at the expected time....
Messages cannot be forwarded back to the same workstation. ...
Messages for this alias are not currently being forwarded. ...
More data is available than can be returned by Windows 2000. ...
More help is available by typing NET HELPMSG parameter ....
Net Send has been interrupted by a Ctrl+Break from the user. ...
NetBIOS returned an error: The NCB and SMB are dumped above. ...
Network logons are paused. ...
New connections will be remembered. ...
New connections will not be remembered. ...
No more print jobs can be added. ...
No more printer destinations can be added. ...
No more printers can be added. ...
No network services are started. ...
No resource was available in the network adapter. The network control bloc...
No updates are necessary to this replicant network/local security database. ...
No users have sessions with this server. ...
No valid response was provided. ...
Offline on name text...
Option name is ambiguous....
Out of Paper on name text...
Print job name has been canceled while printing on name ....
Print job name has been deleted and will not print....
Print job name has not completed printing on name ....
Print job name has paused printing on name ....
Print job name is being held from printing....
Print job name is being spooled....
Print job name is queued for printing....
Profile files cannot exceed 64K. ...
Program filenames must end with .EXE. ...
Replicated data has changed in directory name ....
Replicator could not access name on computer name due to system error text ....
Replicator failed to update signal file in directory name due to text system error....
Replicator limit for files in a directory has been exceeded. ...
Replicator limit for tree depth has been exceeded. ...
Requested addition of items exceeds the maximum allowed. ...
Reset of driver name failed to complete the network control block (NCB). The NCB is the data....
Resolver linkage problem. ...
Sending files is no longer supported. ...
Some entries in the error log were lost because of a buffer overflow. ...
Stopping the Workstation service also stops the Server service. ...
System error text has occurred....
The filename log file cannot be opened....
The filename log file is corrupted and will be cleared....
The filename log file is full....
The name service continue is pending text...
The name service could not be started....
The name service could not be stopped....
The name service failed to pause....
The name service failed to resume....
The name service has been started by another process and is pending. text...
The name service pause is pending text...
The text NETWORKS entry in the LANMAN.INI file has a syntax error and will be ignored....
The account of user name has been locked out on computer name due to number bad password attempts....
The alert recipient is invalid. ...
The alert table is full. ...
The Alerter service had a problem creating the list of alert recipients. The error code is text ....
The amount of resource number requested was more than the maximum. The maximum amount was allocated....
The announcement of the server name failed. ...
The API return buffer is too small. ...
The Application log file could not be opened. filename will be used as the default log file....
The AT command has timed-out. Please try again later. ...
The AT command processor could not run application ....
The AT job ID does not exist. ...
The AT schedule file could not be updated because the disk is full. ...
The AT schedule file is corrupted. ...
The AT schedule file is invalid. Please delete the file and create a new one. ...
The AT schedule file was deleted. ...
The audit log is 80% full. ...
The audit log is full. No audit entries will be logged until the file is ...
The broadcast message was truncated. ...
The browser service was configured with MaintainServerList=No. ...
The buffer for types is not big enough. ...
The command completed with one or more errors. ...
The command contains an invalid number of arguments. ...
The command line cannot exceed 259 characters. ...
The computer computer name already exists....
The computer computer name tried to connect to the server computer name ...
The computer has rebooted from a bugcheck. The bugcheck was: text . te...
The computer has rebooted from a bugcheck. The bugcheck was: text . te...
The computer is not active in this domain. ...
The computer name already exists on the network. Change it and restart the computer. ...
The computer name could not be added as a message alias. The name may already exist on the network. ...
The computer name could not be deleted. ...
The computer name is being used as a message alias on another computer. ...
The configuration file contains an invalid service program name. ...
The configuration file or the command line has a duplicate parameter. ...
The configuration file or the command line has an ambiguous option. ...
The connection identification does not specify a valid connection. ...
The current local clock is time Do you want to set the local computer's ...
The data returned from a remote administration command has been truncated to 64K. ...
The data type is not supported by the print processor. ...
The delete failed due to a problem with the AT schedule file. ...
The destination list provided does not match the destination list of the printer queue. ...
The destination path is illegal. ...
The device driver does not exist. ...
The device is being accessed by an active process. ...
The device is not connected. ...
The device or directory does not exist. ...
The device type is unknown. ...
The domain specified could not be used. ...
The drive letter is in use locally. ...
The dynamic-link library filename could not be loaded, or an error occurred while trying to use it....
The error code is text . There was an error retrieving the message. Make ...
The error log is 80% full. ...
The error log is full. No errors will be logged until the file is cleared or the limit is raised. ...
The event name is invalid. ...
The exception 0x number occurred in the application application at location 0x number ....
The fault-tolerance error log file, LANROOT\\LOGS\\FT.LOG, is more than 64K. ...
The fault-tolerance error-log file, LANROOT\\LOGS\\FT.LOG, had the update ...
The file filename has been changed after initialization. The boot-block ...
The files do not fit to the boot-block configuration file filename . Chan...
The forwarded message alias could not be found on the network. ...
The group already exists. ...
The group name could not be found. ...
The group SERVERS is not present in the local security database. ...
The Help file is corrupted. ...
The Help file is empty. ...
The information in the list of servers may be incorrect. ...
The LAN adapter number is invalid. ...
The LANMAN root directory is unavailable. ...
The limit of 64 entries per resource was exceeded. ...
The LM386 server cannot be started because CACHE.EXE is not running. ...
The local session table is full. The network control block (NCB) request wa...
The log file does not contain the requested record number. ...
The log file has been corrupted. ...
The logoff processor did not delete the message alias. ...
The logon processor did not add the message alias. ...
The logon server could not be found. ...
The logon server could not validate the logon. ...
The logon server was not specified. Your computer will be logged on as STANDALONE. ...
The maximum number of added message aliases has been exceeded. ...
The maximum number of applications was exceeded. The network control block...
The message alias could not be found on the network. ...
The message alias is currently in use. Try again later. ...
The message alias is forwarded. ...
The message alias table on the remote station is full. ...
The message alias was not successfully deleted from all networks. ...
The Message server has stopped due to a lock on the Message server shared data segment. ...
The message was sent but not received. ...
The message was sent, but the recipient has paused the Messenger service. ...
The Messenger service failed to start. ...
The Messenger service has not been started. ...
The Messenger service is already started. ...
The minimum password age for user accounts cannot be greater than the maximum password age. ...
The name has already been shared. ...
The name is not on the local computer. ...
The name specified for the user's home directory ( path ) is not a universa...
The name specified in the network control block (NCB) has been deleted. The NCB is the data. ...
The NetBIOS interface is busy. The network control block (NCB) request was...
The Netlogon service has not been started. ...
The network name ran out of network control blocks (NCBs). You may need ...
The network adapter name table is full. The network control block (NCB) re...
The network connection could not be found. ...
The network control block (NCB) command completed while a cancel was occurring. The NCB is the data. ...
The network control block (NCB) command is not valid to cancel. The NCB is the data. ...
The network control block (NCB) command is still pending. The NCB is the data. ...
The network control block (NCB) command was canceled. The NCB is the data. ...
The network is not started. ...
The network software is not installed. ...
The operation failed because a network software error occurred. ...
The operation is invalid for this device. ...
The option name is unknown....
The options of this command are: ...
The parent directory could not be located. ...
The password for this computer is not found in the local security database. ...
The password is invalid for user name ....
The password is invalid. ...
The password is shorter than required. ...
The password of this user cannot change. ...
The password of this user has expired. ...
The password of this user is too recent to change. ...
The password or user name is invalid for user name ....
The password parameter is invalid. ...
The passwords do not match. ...
The Peer service supports only two simultaneous users. ...
The permissions string contains invalid permissions. ...
The primary domain controller for domain name failed....
The primary domain controller for domain name has apparently failed....
The print job does not exist. ...
The print processor is not installed. ...
The print processor is not responding. ...
The printer destination already exists. ...
The printer destination cannot be found. ...
The printer does not exist. ...
The printer does not exist. Do you want to create it? text : text...
The printer is offline. ...
The printer queue already exists. ...
The program cannot be used with this operating system. ...
The queue is empty. ...
The queue priority is invalid. ...
The queue you specified does not exist. ...
The redirector is already installed. ...
The redirector is out of a resource: text ....
The Registry or the information you just typed includes an illegal value for " text "....
The replicator attempted to log on at computer name as name and failed....
The replicator attempted to log on at computer name as user name and failed....
The request will be processed at the primary domain controller for domain name ....
The requested API is not supported on the remote server. ...
The requested device is invalid. ...
The requested information is not available. ...
The requested pause or stop is not valid for this service. ...
The requested service has already been started. ...
The required parameter was not provided on the command line or in the configuration file. ...
The resource name could not be found. ...
The resource named cannot be shared. ...
The resource permission list already exists. ...
The Run server you requested is paused. ...
The SCHED.LOG file could not be opened. ...
The security database could not be found. ...
The security database full synchronization has been initiated by the server computer name ....
The security database has not been started. ...
The security database is corrupted. ...
The server computer name and computer name both claim to be the primary...
The server cannot access the user accounts database (NET.ACC). ...
The server cannot create the name mailslot needed to send the ReleaseMem...
The server cannot export directory name to client name . It is exported from another server....
The server cannot export directory name , to client name . It is exported from another server....
The server cannot increase the size of a memory segment. ...
The server cannot open more files because it has reached its maximum number. ...
The server cannot update the AT schedule file. The file is corrupted. ...
The server could not access the name network with NetBiosOpen....
The server could not be located. ...
The server could not close filename . The file is probably corrupted....
The server could not create a thread. The THREADS parameter in the CONFIG....
The server could not find an AT schedule file so it created one. ...
The server could not read the AT schedule file. ...
The server encountered an error when calling NetIMakeLMFileName. The error code is the data. ...
The server failed to register for the ReleaseMemory alert, with recipient ...
The server failed to start. Either all three chdev parameters must be zero...
The server found an invalid AT schedule record. ...
The server has reached the maximum number of connections it supports. ...
The server has reached the maximum number of sessions it supports. ...
The server identification does not specify a valid server. ...
The server is configured without a valid user path. ...
The server is currently out of the requested resource. ...
The server is not configured for remote administration. ...
The server is not configured for transactions. ...
The server is not running with user-level security. ...
The Server service is not started. ...
The servers computer name and computer name both claim to be an NT Dom...
The service control dispatcher could not find the service name in the dispatch table. ...
The service control dispatcher pipe read failed. ...
The service control is busy. ...
The service could not be controlled in its present state. ...
The service did not report an error. ...
The service did not respond to control and was stopped with the DosKillProc function. ...
The service does not respond to control actions. ...
The service ended abnormally. ...
The service failed to authenticate with the primary domain controller. ...
The service failed to obtain a long-term lock on the segment for network c...
The service failed to release the long-term lock on the segment for networ...
The service has stopped due to repeated consecutive occurrences of a netwo...
The service is not responding to the control function. ...
The service name is invalid. ...
The service table is full. ...
The session from computer name has open files....
The session identification does not specify a valid session. ...
The share must be removed from the Distributed File System before it can be deleted. ...
The share name entered may not be accessible from some MS-DOS workstations....
The shared queue cannot be deleted while a print job is being spooled to the queue. ...
The shared resource you are connected to could not be found. ...
The software requires a newer version of the operating system. ...
The source and destination paths are on different servers. ...
The source path cannot be a directory. ...
The source path is illegal. ...
The specified client is already registered for the specified event. ...
The specified component could not be found in the configuration information. ...
The specified parameter could not be found in the configuration information. ...
The spooler is not running. ...
The start offset is out of range. ...
The string and prefix specified are too long. ...
The string you have entered is too long. The maximum is text , please reenter. text...
The sub-service failed to start. ...
The syntax is incorrect. ...
The syntax of this command is: ...
The system cannot delete current connections to network resources. ...
The system could not find message: text ....
The system ran out of a resource controlled by the name option....
The system returned an unexpected error code. The error code is the data. ...
The system was unable to parse the command line in this file. ...
The time difference with the primary domain controller name exceeds the ...
The time range specified ends before it starts. ...
The UPS driver could not be opened. The error code is the data. ...
The UPS indicated a line fail or low battery situation. Service not started. ...
The UPS service could not access the specified Comm Port. ...
The UPS service did not complete execution of the user specified shut down command file. ...
The UPS service failed to execute a user specified shutdown command file ...
The UPS service failed to perform a system shut down. ...
The UPS service is about to perform final shut down. ...
The UPS service is not configured correctly. ...
The UPS service is starting shut down at computer name due to low battery....
The UPS service is starting shut down at computer name ....
The UPS service performed server shut down. ...
The user account already exists. ...
The user accounts database (NET.ACC) is corrupted. The local security sys...
The user accounts database (NET.ACC) is missing. The local security syste...
The user accounts database is not configured correctly. ...
The user already belongs to this group. ...
The user context supplied is invalid. ...
The user does not belong to this group. ...
The user is not allowed to log on at this time. ...
The user is not allowed to log on from this workstation. ...
The user name could not be found. ...
The user name is invalid. ...
The user name or group name parameter is invalid. ...
The user or group account specified cannot be found. ...
The user was successfully created but could not be added to the USERS local group. ...
The user's home directory could not be determined. ...
The user's home directory has not been specified. ...
The value for ENABLESCRIPT must be YES. ...
The Windows 2000 domain controller for this domain could not be located. ...
The workstation could not initialize the Async NetBIOS Thread. The error code is the data. ...
The workstation could not open the initial shared segment. The error code is the data. ...
The workstation driver is not installed. ...
The workstation encountered an error while responding to an SSI revalidatio...
The workstation encountered an error while trying to start the user account...
The workstation has open files. ...
The workstation host table is full. ...
The workstation information segment is bigger than 64K. The size follows, in DWORD format: ...
The workstation is not configured properly. ...
The workstation is not logged on to the local-area network. ...
The Workstation must be started with the NET START command. ...
The Workstation service has not been started. ...
The Workstation service is already running. Windows 2000 will ignore command options for the workstation. ...
The Workstation service is in an inconsistent state. Restart the computer b...
The workstation was unable to get the name-number of the computer. ...
There are no alternate servers registered on this server. ...
There are no available drive letters left. ...
There are no shared communication devices. ...
There are open files and/or incomplete directory searches pending on the connection to computer name ....
There are open files on the connection. ...
There are too many names in the user accounts database. ...
There are too many network control block (NCB) commands outstanding. The N...
There are too many NETWORKS entries in the LANMAN.INI file. ...
There is a conflict in the value or use of these options: text ....
There is a problem with a configuration of user specified shut down comman...
There is a problem with a configuration of user specified shut down command file. ...
There is a problem with the file. ...
There is a problem with the printer; please check it. ...
There is a problem with the security database creation date or serial number. ...
There is already a logon domain for this computer. ...
There is no account for this computer in the security database. ...
There is no space for another entry in the table of available servers. ...
There is no such computer: computer name ....
There is no such global user or group: name ....
There is no such user or group: name ....
There is no such user: user name ....
There is not an open file with that identification number. ...
There is not enough memory to start the Workstation service. ...
There was an error expanding name as a group name. Try splitting the gro...
There was an error in creating or reading the alerter mailslot. The error code is text ....
There was an error installing NETWKSTA.SYS. Press ENTER to continue. ...
There was an error sending user name the alert message - ( text ) The error code is text ....
There was an error stopping service name . The error code from NetServiceControl is the data....
There was an unrecoverable error in the dynamic- link library of the service. ...
There were number access-denied errors in the last number minutes....
There were parameter access-denied errors in the last parameter minutes...
There were parameter bad password attempts in the last parameter minute...
This asg_type is invalid. ...
This computer name is invalid. ...
This device cannot be shared as both a spooled and a non-spooled resource. ...
This device cannot be shared. ...
This device is already in use as a communication device. ...
This device is already in use by the spooler. ...
This device is currently being shared. ...
This device is not shared. ...
This device name list is invalid. ...
This device was not open. ...
This is an invalid argument: text ....
This is an invalid device name. ...
This is an invalid response. ...
This is not a valid computer name or domain name. ...
This list of devices is invalid. ...
This log file has changed between reads. ...
This message alias already exists locally. ...
This message alias has already been forwarded. ...
This message alias has been added but is still forwarded. ...
This message alias will be deleted later. ...
This operation cannot be performed on the print destination in its current state. ...
This operation cannot be performed on the print job in its current state. ...
This operation cannot be performed on the printer queue in its current state. ...
This operation is not allowed on the last administrative account. ...
This operation is not allowed on this special group. ...
This operation is not permitted when the Netlogon service is running. ...
This operation is not supported on computers with multiple networks. ...
This operation is not supported on workstations. ...
This operation is only allowed on the primary domain controller of the domain. ...
This operation is privileged on systems with earlier versions of the software. ...
This password cannot be used now. ...
This path component is invalid. ...
This printer destination is idle and cannot accept control operations. ...
This printer destination request contains an invalid control function. ...
This replicant database is outdated; synchronization is required. ...
This schedule date is invalid. ...
This server's clock is not synchronized with the primary domain controller's clock. ...
This share name or password is invalid. ...
This shared resource does not exist. ...
This user account has expired. ...
This user account is undefined. ...
This user is not cached in user accounts database session cache. ...
This Windows 2000 computer is configured as a member of a workgroup, not as ...
This workstation is already logged on to the local-area network. ...
Time supplied is not exactly on the hour. ...
Type the password for text : text...
Type the password for the shared resource: text...
Type the Replicator service password: text...
Unable to add to the security database session cache segment. ...
Unable to add to the user accounts database. ...
Unable to create or open system semaphore name . The error code is the data....
Unable to write to this file. ...
Unrecognized message received in mailslot. ...
User user name is already a member of group group ....
Users have open files on computer name . Continuing the operation will force the files closed....
User's session disconnected text text...
WARNING: Because of a lazy-write error, drive drive letter now contains...
WARNING: You have until time to logoff. If you have not logged off at th...
WARNING: You must log off at computer name now. You have two minutes to...
You can only perform this operation on printers and communication devices. ...
You entered an invalid value for the command option....
You may not specify paths for ADMIN$ and IPC$ shares. ...
You specified an invalid file number. ...
You specified an invalid print job number. ...
You specified too many values for the command option....
You used an invalid option. ...
You used an option with an invalid value. ...
You will be automatically disconnected at time ....
Your logon time at time ended at time ....
Your logon time at time ends at time . Please clean up and log off....
Your logon time at time has ended....
Your password cannot be changed until date ....
Your persistent connections were not all restored. ...
© 2017 Microsoft