Redirecting assembly versions

Note

This article is specific to .NET Framework. It doesn't apply to newer implementations of .NET, including .NET 6 and later versions.

You can redirect compile-time binding references to .NET Framework assemblies, third-party assemblies, or your own app's assemblies. You can redirect your app to use a different version of an assembly in a number of ways: through publisher policy, through an app configuration file; or through the machine configuration file. This article discusses how assembly binding works in .NET Framework and how it can be configured.

Tip

This article is specific to .NET Framework apps. For information about assembly loading in .NET 5+ (and .NET Core), see Dependency loading in .NET.

Assembly unification and default binding

Bindings to .NET Framework assemblies are sometimes redirected through a process called assembly unification. The .NET Framework consists of a version of the common language runtime and about two dozen .NET Framework assemblies that make up the type library. These .NET Framework assemblies are treated by the runtime as a single unit. By default, when an app is launched, all references to types in code run by the runtime are directed to .NET Framework assemblies that have the same version number as the runtime that is loaded in a process. The redirections that occur with this model are the default behavior for the runtime.

For example, if your app references types in the System.XML namespace and was built by using .NET Framework 4.5, it contains static references to the System.XML assembly that ships with runtime version 4.5. If you want to redirect the binding reference to point to the System.XML assembly that ship with .NET Framework 4, you can put redirect information in the app configuration file. A binding redirection in a configuration file for a unified .NET Framework assembly cancels the unification for that assembly.

In addition, you may want to manually redirect assembly binding for third-party assemblies if there are multiple versions available.

Redirect versions by using publisher policy

Vendors of assemblies can direct apps to a newer version of an assembly by including a publisher policy file with the new assembly. The publisher policy file, which is located in the global assembly cache, contains assembly redirection settings.

Each major.minor version of an assembly has its own publisher policy file. For example, redirections from version 2.0.2.222 to 2.0.3.000 and from version 2.0.2.321 to version 2.0.3.000 both go into the same file, because they are associated with version 2.0. However, a redirection from version 3.0.0.999 to version 4.0.0.000 goes into the file for version 3.0.999. Each major version of the .NET Framework has its own publisher policy file.

If a publisher policy file exists for an assembly, the runtime checks this file after checking the assembly's manifest and app configuration file. Vendors should use publisher policy files only when the new assembly is backward compatible with the assembly being redirected.

You can bypass publisher policy for your app by specifying settings in the app configuration file, as discussed in the Bypassing publisher policy section.

Redirect versions at the app level

There are a few different techniques for changing the binding behavior for your app through the app configuration file: you can manually edit the file, you can rely on automatic binding redirection, or you can specify binding behavior by bypassing publisher policy.

Manually edit the app config file

You can manually edit the app configuration file to resolve assembly issues. For example, if a vendor might release a newer version of an assembly that your app uses without supplying a publisher policy, because they do not guarantee backward compatibility, you can direct your app to use the newer version of the assembly by putting assembly binding information in your app's configuration file as follows.

<dependentAssembly>
  <assemblyIdentity name="someAssembly"
    publicKeyToken="32ab4ba45e0a69a1"
    culture="en-us" />
  <bindingRedirect oldVersion="7.0.0.0" newVersion="8.0.0.0" />
</dependentAssembly>

Rely on automatic binding redirection

When you create a desktop app in Visual Studio that targets .NET Framework 4.5.1 or a later version, the app uses automatic binding redirection. This means that if two components reference different versions of the same strong-named assembly, the runtime automatically adds a binding redirection to the newer version of the assembly in the output app configuration (app.config) file. This redirection overrides the assembly unification that might otherwise take place. The source app.config file is not modified. For example, let's say that your app directly references an out-of-band .NET Framework component but uses a third-party library that targets an older version of the same component. When you compile the app, the output app configuration file is modified to contain a binding redirection to the newer version of the component. If you create a web app, you receive a build warning regarding the binding conflict, which in turn, gives you the option to add the necessary binding redirect to the source web configuration file.

If you manually add binding redirects to the source app.config file, at compile time, Visual Studio tries to unify the assemblies based on the binding redirects you added. For example, let's say you insert the following binding redirect for an assembly:

<bindingRedirect oldVersion="3.0.0.0" newVersion="2.0.0.0" />

If another project in your app references version 1.0.0.0 of the same assembly, automatic binding redirection adds the following entry to the output app.config file so that the app is unified on version 2.0.0.0 of this assembly:

<bindingRedirect oldVersion="1.0.0.0" newVersion="2.0.0.0" />

You can enable automatic binding redirection if your app targets older versions of the .NET Framework. You can override this default behavior by providing binding redirection information in the app.config file for any assembly, or by turning off the binding redirection feature. For information about how to turn this feature on or off, see How to: Enable and Disable Automatic Binding Redirection.

Bypass publisher policy

You can override publisher policy in the app configuration file if necessary. For example, new versions of assemblies that claim to be backward compatible can still break an app. If you want to bypass publisher policy, add a <publisherPolicy> element to the <dependentAssembly> element in the app configuration file, and set the apply attribute to no, which overrides any previous yes settings.

<publisherPolicy apply="no" />

Bypass publisher policy to keep your app running for your users, but make sure you report the problem to the assembly vendor. If an assembly has a publisher policy file, the vendor should make sure that the assembly is backward compatible and that clients can use the new version as much as possible.

Redirect versions at the machine level

There might be rare cases when a machine administrator wants all apps on a computer to use a specific version of an assembly. For example, a specific version might fix a security hole. If an assembly is redirected in the machine's configuration file, called machine.config, all apps on that machine that use the old version are directed to use the new version. The machine configuration file overrides the app configuration file and the publisher policy file. This machine.config file is located at %windir%\Microsoft.NET\Framework[version]\config\machine.config for 32-bit machines, or %windir%\Microsoft.NET\Framework64[version]\config\machine.config for 64-bit machines.

Specify assembly binding in configuration files

You use the same XML format to specify binding redirects whether it's in the app configuration file, the machine configuration file, or the publisher policy file. To redirect one assembly version to another, use the <bindingRedirect> element. The oldVersion attribute can specify a single assembly version or a range of versions. The newVersion attribute should specify a single version. For example, <bindingRedirect oldVersion="1.1.0.0-1.2.0.0" newVersion="2.0.0.0"/> specifies that the runtime should use version 2.0.0.0 instead of the assembly versions between 1.1.0.0 and 1.2.0.0.

The following code example demonstrates a variety of binding redirect scenarios. The example specifies a redirect for a range of versions for myAssembly, and a single binding redirect for mySecondAssembly. The example also specifies that publisher policy file will not override the binding redirects for myThirdAssembly.

To bind an assembly, you must specify the string "urn:schemas-microsoft-com:asm.v1" with the xmlns attribute in the <assemblyBinding> tag.

<configuration>
  <runtime>
    <assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1">
      <dependentAssembly>
        <assemblyIdentity name="myAssembly"
          publicKeyToken="32ab4ba45e0a69a1"
          culture="en-us" />
        <!-- Assembly versions can be redirected in app,
          publisher policy, or machine configuration files. -->
        <bindingRedirect oldVersion="1.0.0.0-2.0.0.0" newVersion="3.0.0.0" />
      </dependentAssembly>
      <dependentAssembly>
        <assemblyIdentity name="mySecondAssembly"
          publicKeyToken="32ab4ba45e0a69a1"
          culture="en-us" />
             <bindingRedirect oldVersion="1.0.0.0" newVersion="2.0.0.0" />
      </dependentAssembly>
      <dependentAssembly>
      <assemblyIdentity name="myThirdAssembly"
        publicKeyToken="32ab4ba45e0a69a1"
        culture="en-us" />
        <!-- Publisher policy can be set only in the app
          configuration file. -->
        <publisherPolicy apply="no" />
      </dependentAssembly>
    </assemblyBinding>
  </runtime>
</configuration>

Limit assembly bindings to a specific version

You can use the appliesTo attribute on the <assemblyBinding> element in an app configuration file to redirect assembly binding references to a specific version of the .NET Framework. This optional attribute uses a .NET Framework version number to indicate what version it applies to. If no appliesTo attribute is specified, the <assemblyBinding> element applies to all versions of the .NET Framework.

For example, to redirect assembly binding for a .NET Framework 3.5 assembly, you would include the following XML code in your app configuration file.

<runtime>
  <assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1"
    appliesTo="v3.5">
    <dependentAssembly>
      <!-- assembly information goes here -->
    </dependentAssembly>
  </assemblyBinding>
</runtime>

You should enter redirection information in version order. For example, enter assembly binding redirection information for .NET Framework 3.5 assemblies followed by .NET Framework 4.5 assemblies. Finally, enter assembly binding redirection information for any .NET Framework assembly redirection that does not use the appliesTo attribute and therefore applies to all versions of .NET Framework. If there is a conflict in redirection, the first matching redirection statement in the configuration file is used.

For example, to redirect one reference to a .NET Framework 3.5 assembly and another reference to a .NET Framework 4 assembly, use the pattern shown in the following pseudocode.

<assemblyBinding xmlns="..." appliesTo="v3.5 ">
  <!--.NET Framework version 3.5 redirects here -->
</assemblyBinding>

<assemblyBinding xmlns="..." appliesTo="v4.0.30319">
  <!--.NET Framework version 4.0 redirects here -->
</assemblyBinding>

<assemblyBinding xmlns="...">
  <!-- redirects meant for all versions of the runtime -->
</assemblyBinding>

See also