4.10 Sample Phonebook File for a Demand-dial Connection
This example illustrates the settings associated with a Demand-Dial connection "dd1". The description for each key/value pair is given in the following table. The format of the phonebook file is defined in section 2.2.2. The phonebook entry for "dd1" is stored inside the file router.pbk present under the path %windir%\system32\ras on the RRAS server. The following table describes the sample phonebook settings associated with "dd1". The first column in the following table is the sample phonebook file representing the settings for "dd1" connection. The second column is the description of the values for all of the settings.
Phonebook file |
Meaning |
---|---|
[dd1]\CR\LF |
Name of the Demand-Dial connection is "dd1" |
Encoding=1\CR\LF |
Encoding format is UTF-8 |
Type=1\CR\LF |
Type of connection is dial-up |
AutoLogon=0\ CR\LF |
Ignored |
UseRASCredentials=0\CR\LF |
Ignored |
LowDateTime=-300171584\CR\LF |
Ignored |
HighDateTime=30015653\CR\LF |
Ignored |
DialParamsUID=700993612\CR\LF |
A unique number |
Guid=ECFE1B3644EBB744A7562E43091795ED\CR\LF |
A unique identifier of the Demand-Dial connection "dd1" |
BaseProtocol=1\CR\LF |
Ignored |
VpnStrategy=0\CR\LF |
Ignored for Modem connection type |
ExcludedProtocols=0\CR\LF |
Negotiate IPv4 and IPv6 |
LcpExtensions=1\CR\LF |
Enable LCP extensions |
DataEncryption=8\CR\LF |
Request data encryption |
SwCompression=1\CR\LF |
Enable software compression |
NegotiateMultilinkAlways=0\CR\LF |
Don't negotiate multilink |
SkipNwcWarning=0\CR\LF |
Ignored |
SkipDownLevelDialog=0\CR\LF |
Ignored |
SkipDoubleDialDialog=0\CR\LF |
Ignored |
DialMode=1\CR\LF |
Dial all Modems |
DialPercent=75\CR\LF |
Ignored since DialMode is 1 |
DialSeconds=120\CR\LF |
Ignored since DialMode is 1 |
HangUpPercent=10\CR\LF |
Ignored since DialMode is 1 |
HangUpSeconds=120\CR\LF |
Ignored since DialMode is 1 |
OverridePref=32\CR\LF |
Read CallbackMode from this entry |
RedialAttempts=0\CR\LF |
Redial attempts is set to 0 |
RedialSeconds=60\CR\LF |
Redial seconds is set to 60 |
IdleDisconnectSeconds=300\CR\LF |
Idle disconnect seconds is set to 300 |
RedialOnLinkFailure=0\CR\LF |
Do not redial the connection on link failure |
CallbackMode=0\CR\LF |
No callback |
CustomDialDll=\CR\LF |
The key does not have a value |
CustomDialFunc=\CR\LF |
Ignored |
CustomRRASDialDll=\CR\LF |
Ignored |
ForceSecureCompartment=0\CR\LF |
Ignored |
DisableIKENameEkuCheck=0\CR\LF |
Ignored. This is not applicable since Type is "1". |
AuthenticateServer=0\CR\LF |
Server authentication is disabled |
ShareMsFilePrint=0\CR\LF |
NetBT is disabled |
BindMsNetClient=0\CR\LF |
Microsoft Net client is disabled |
SharedPhoneNumbers=1\CR\LF |
Phone numbers are shared for all the subentries |
GlobalDeviceSettings=0\CR\LF |
Do not use the device settings present in the phonebook file |
PrerequisiteEntry=\CR\LF |
Ignored |
PrerequisitePbk=\CR\LF |
Ignored |
PreferredPort=COM3\CR\LF |
Preferred port name is "COM3" |
PreferredDevice= Compaq 56K USB External Fax Modem \CR\LF |
Preferred device name is "Compaq 56K USB External Fax Modem" |
PreferredBps=115200\CR\LF |
Maximum transfer speed is 115200 bits per second for preferred modem |
PreferredHwFlow=1\CR\LF |
Hardware flow control is enabled for preferred modem |
PreferredProtocol=1\CR\LF |
Cyclic Redundancy Check (CRC) is enabled for preferred modem |
PreferredCompression=1\CR\LF |
Enable hardware compression for preferred modem |
PreferredSpeaker=1\CR\LF |
Enable modem speaker for preferred modem |
PreferredMdmProtocol=0\CR\LF |
Ignored |
PreviewUserPw=1\CR\LF |
Ignored |
PreviewDomain=1\CR\LF |
Ignored |
PreviewPhoneNumber=0\CR\LF |
Ignored |
ShowDialingProgress=0\CR\LF |
Ignored |
ShowMonitorIconInTaskBar=1\CR\LF |
Ignored |
CustomAuthKey=0\CR\LF |
Ignored since AuthRestrictions not configured to negotiate EAP |
AuthRestrictions=544\CR\LF |
Negotiate authentication protocols Challenge Handshake Protocol (CHAP) and Microsoft Challenge Handshake Protocol Version 2 (MSCHAPv2) |
IpPrioritizeRemote=1\CR\LF |
Ignored |
IpInterfaceMetric=0\CR\LF |
Ignored |
IpHeaderCompression=1\CR\LF |
Enable IPv4 header compression |
IpAddress=0.0.0.0\CR\LF |
Ignored since IpAssign is 1 |
IpDnsAddress=0.0.0.0\CR\LF |
Ignored since IpNameAssign is 3 |
IpDns2Address=0.0.0.0\CR\LF |
Ignored since IpNameAssign is 3 |
IpWinsAddress=0.0.0.0\CR\LF |
Ignored since IpNameAssign is 3 |
IpWins2Address=0.0.0.0\CR\LF |
Ignored since IpNameAssign is 3 |
IpAssign=1\CR\LF |
RRAS assigns the IPv4 address |
IpNameAssign=3\CR\LF |
RRAS assigns the IPv4 DNS and WINS address |
IpDnsFlags=0\CR\LF |
Do not register the client IPv4 address with DNS |
IpNBTFlags=0\CR\LF |
Disable NetBT |
TcpWindowSize=0\CR\LF |
Ignored |
UseFlags=2\CR\LF |
Ignored |
IpSecFlags=0\CR\LF |
Ignored since Type is 1. |
IpDnsSuffix=\CR\LF |
Ignored |
Ipv6PrioritizeRemote=1\CR\LF |
Ignored |
Ipv6InterfaceMetric=0\CR\LF |
Ignored |
Ipv6NameAssign=1\CR\LF |
RRAS assigns the IPv6 DNS address |
Ipv6DnsAddress=::\CR\LF |
Ignored since Ipv6NameAssign is 1 |
Ipv6Dns2Address=::\CR\LF |
Ignored since Ipv6NameAssign is 1 |
Ipv6InterfaceId=0000000000000000\CR\LF |
Ignored |
NETCOMPONENTS=\CR\LF |
Ignored |
ms_msclient=0\CR\LF |
Ignored |
ms_server=0\CR\LF |
Ignored |
MEDIA=serial\CR\LF |
Media name is serial |
Port=COM3\CR\LF |
Communication port name is COM3 |
Device=Compaq 56K USB External Fax Modem\CR\LF |
Device name is "Compaq 56K USB External Fax Modem" |
ConnectBPS=115200\CR\LF |
Maximum transfer speed is 115200 bits per second |
DEVICE=switch\CR\LF |
Device type is pre-connect switch |
Terminal=1\CR\LF |
Display terminal window |
DEVICE=modem\CR\LF |
Device type is modem |
PhoneNumber=2006034\CR\LF |
Primary local phone number to dial is 2006034 |
AreaCode=\CR\LF |
Ignored as UseDialingRules is 0 |
CountryCode=91\CR\LF |
Ignored as UseDialingRules is 0 |
CountryID=91\CR\LF |
Ignored as UseDialingRules is 0 |
UseDialingRules=0\CR\LF |
Do not use the dialing rules |
Comment=\CR\LF |
Ignored |
FriendlyName=\CR\LF |
Ignored |
PhoneNumber=2006035\CR\LF |
Alternate local phone number is 2006035 |
AreaCode=\CR\LF |
Ignored because UseDialingRules is 0 |
CountryCode=91\CR\LF |
Ignored as UseDialingRules is 0 |
CountryID=91\CR\LF |
Ignored as UseDialingRules is 0 |
UseDialingRules=0\CR\LF |
Do not use the dialing rules |
Comment=\CR\LF |
Ignored |
FriendlyName=\CR\LF |
Ignored |
LastSelectedPhone=0\CR\LF |
Ignored |
PromoteAlternates=0\CR\LF |
Do not promote alternate numbers |
TryNextAlternateOnFail=1\CR\LF |
Try alternate number on failure of the primary number |
HwFlowControl=1\CR\LF |
Hardware flow control is enabled |
Protocol=1\CR\LF |
Cyclic Redundancy Check (CRC) is enabled |
Compression=1\CR\LF |
Enable hardware compression |
Speaker=0\CR\LF |
Disable modem speaker |
MdmProtocol=0\CR\LF |
Ignored |