Expand Minimize

WdfDeviceInitAssignWdmIrpPreprocessCallback method

[Applies to KMDF only]

The WdfDeviceInitAssignWdmIrpPreprocessCallback method registers a callback function to handle an IRP major function code and, optionally, one or more minor function codes that are associated with the major function code.

Syntax


NTSTATUS WdfDeviceInitAssignWdmIrpPreprocessCallback(
  [in]            PWDFDEVICE_INIT DeviceInit,
  [in]            PFN_WDFDEVICE_WDM_IRP_PREPROCESS EvtDeviceWdmIrpPreprocess,
  [in]            UCHAR MajorFunction,
  [in, optional]  PUCHAR MinorFunctions,
  [in]            ULONG NumMinorFunctions
);

Parameters

DeviceInit [in]

A pointer to a WDFDEVICE_INIT structure.

EvtDeviceWdmIrpPreprocess [in]

A pointer to the driver's EvtDeviceWdmIrpPreprocess callback function.

MajorFunction [in]

One of the IRP major function codes that are defined in wdm.h.

MinorFunctions [in, optional]

A pointer to an array of one or more IRP minor function codes that are associated with the specified major function code. This parameter is optional and can be NULL. For more information, see the following Remarks section.

NumMinorFunctions [in]

The number of minor function codes that are contained in the MinorFunctions array.

Return value

If the operation succeeds, the method returns STATUS_SUCCESS. Additional return values include:

Return codeDescription
STATUS_INVALID_PARAMETER

The MajorFunction value is invalid.

STATUS_INSUFFICIENT_RESOURCES

There is insufficient memory.

STATUS_INVALID_DEVICE_REQUEST

The driver previously registered a MinorFunctions array for this major function and is attempting to specify minor functions again for the specified MajorFunction code.

 

The method might return other NTSTATUS values.

Remarks

Drivers can call the WdfDeviceInitAssignWdmIrpPreprocessCallback method for either of two reasons:

  • To handle an IRP major or minor function code that the framework does not support.

    For example, the framework does not support IRP_MJ_FLUSH_BUFFERS. If your driver must support this IRP, it must register an EvtDeviceWdmIrpPreprocess callback function that handles the IRP. The driver must follow WDM rules for processing IRPs.

  • To preprocess an IRP before the framework handles it.

    In rare cases, it might be necessary for a driver to process an IRP before the framework processes it. In such cases, the driver's EvtDeviceWdmIrpPreprocess callback function can process the IRP and then call WdfDeviceWdmDispatchPreprocessedIrp to return the IRP to the framework. Depending on the IRP's function code, the framework might process the IRP itself or it might deliver the IRP to the driver again in a framework request object.

The framework calls the EvtDeviceWdmIrpPreprocess callback function whenever it receives an I/O request packet (IRP) that contains an IRP major function code that matches the MajorFunction parameter and a minor function code that matches one of the minor function codes that are in the MinorFunctions array.

If the MinorFunctions array pointer is NULL, the framework calls the callback function for all minor function codes that are associated with the specified major function code. If the MinorFunctions array pointer is not NULL, the framework makes a copy of the array so that the driver does not have to permanently keep its array.

If the driver received DeviceInit pointer from WdfPdoInitAllocate or an EvtChildListCreateDevice event callback function, the driver's EvtDeviceWdmIrpPreprocess callback function cannot set a completion routine for IRPs that contain a major function code of IRP_MJ_PNP. Otherwise, Driver Verifier will report an error.

If your driver calls WdfDeviceInitAssignWdmIrpPreprocessCallback one or more times, the framework increments the StackSize member of the driver's WDM DEVICE_OBJECT structure one time. As a result, the I/O manager adds an additional I/O stack location to all IRPs so that the EvtDeviceWdmIrpPreprocess callback function can set an IoCompletion routine. Note that this extra I/O stack location is added to all IRPs, not just the ones that contain an IRP major function code that you specify in a call to WdfDeviceInitAssignWdmIrpPreprocessCallback. Therefore, to avoid unnecessarily increasing your driver's use of the nonpaged memory pool, you should avoid using WdfDeviceInitAssignWdmIrpPreprocessCallback unless there is no alternative.

If your driver calls WdfDeviceInitAssignWdmIrpPreprocessCallback more than once for the same major code, the framework retains only the most recently set EvtDeviceWdmIrpPreprocess callback function for this major code. (Your driver can’t register multiple preprocess callbacks for a single major code.)

For more information about the WdfDeviceInitAssignWdmIrpPreprocessCallback method, see Handling WDM IRPs Outside of the Framework.

Examples

The following code example defines an EvtDeviceWdmIrpPreprocess event callback function, and then registers the callback function to handle IRP_MJ_QUERY_INFORMATION IRPs.


NTSTATUS
SerialQueryInformationFile(
    IN WDFDEVICE Device,
    IN PIRP Irp
    )

/*++

Routine Description:

    This routine is used to query the end of file information on
    the opened serial port.  Any other file information request
    is retured with an invalid parameter.

    This routine always returns an end of file of 0.

Arguments:

    DeviceObject - Pointer to the device object for this device

    Irp - Pointer to the IRP for the current request

Return Value:

    The function value is the final status of the call

--*/

{
    NTSTATUS Status;
    PIO_STACK_LOCATION IrpSp;

    SerialDbgPrintEx(TRACE_LEVEL_INFORMATION, DBG_PNP, ">SerialQueryInformationFile(%p, %p)\n", Device, Irp);

    PAGED_CODE();


    IrpSp = IoGetCurrentIrpStackLocation(Irp);
    Irp->IoStatus.Information = 0L;
    Status = STATUS_SUCCESS;

    if (IrpSp->Parameters.QueryFile.FileInformationClass ==
        FileStandardInformation) {

        if (IrpSp->Parameters.DeviceIoControl.OutputBufferLength <
                sizeof(FILE_STANDARD_INFORMATION))
        {
                Status = STATUS_BUFFER_TOO_SMALL;
        }
        else
        {
            PFILE_STANDARD_INFORMATION Buf = Irp->AssociatedIrp.SystemBuffer;

            Buf->AllocationSize.QuadPart = 0;
            Buf->EndOfFile = Buf->AllocationSize;
            Buf->NumberOfLinks = 0;
            Buf->DeletePending = FALSE;
            Buf->Directory = FALSE;
            Irp->IoStatus.Information = sizeof(FILE_STANDARD_INFORMATION);
        }

    } else if (IrpSp->Parameters.QueryFile.FileInformationClass ==
               FilePositionInformation) {

        if (IrpSp->Parameters.DeviceIoControl.OutputBufferLength <
                sizeof(FILE_POSITION_INFORMATION))
        {
                Status = STATUS_BUFFER_TOO_SMALL;
        }
        else
        {

            ((PFILE_POSITION_INFORMATION)Irp->AssociatedIrp.SystemBuffer)->
                CurrentByteOffset.QuadPart = 0;
            Irp->IoStatus.Information = sizeof(FILE_POSITION_INFORMATION);
        }

    } else {
        Status = STATUS_INVALID_PARAMETER;
    }

    Irp->IoStatus.Status = Status;

    IoCompleteRequest(Irp, IO_NO_INCREMENT);

    return Status;

}

NTSTATUS
SerialEvtDeviceAdd(
    IN WDFDRIVER Driver,
    IN PWDFDEVICE_INIT DeviceInit
    )
{
...
    status = WdfDeviceInitAssignWdmIrpPreprocessCallback(
                                                 DeviceInit,
                                                 SerialQueryInformationFile,
                                                 IRP_MJ_QUERY_INFORMATION,
                                                 NULL, // Pointer to the minor function table
                                                 0 // Number of entries in the table
                                                 ); 
    if (!NT_SUCCESS(status)) {
        return status;
    }
...
}

Requirements

Minimum KMDF version

1.0

Header

Wdfdevice.h (include Wdf.h)

Library

Wdf01000.sys (see Framework Library Versioning.)

IRQL

<= DISPATCH_LEVEL

DDI compliance rules

ChildDeviceInitAPI, ControlDeviceInitAPI, DeviceInitAPI, DriverCreate, InitFreeDeviceCallback, InitFreeDeviceCreate, InitFreeNull, KmdfIrql, KmdfIrql2, PdoDeviceInitAPI, PdoInitFreeDeviceCallback, PdoInitFreeDeviceCreate

See also

WdfDeviceWdmDispatchPreprocessedIrp

 

 

Send comments about this topic to Microsoft

顯示:
© 2014 Microsoft