EN
本內容沒有您的語言版本,但有英文版本。

WLAN Data Path Tests - Functional

This automated performs stress tests on WLAN scan, connect and disconnect, radio off and on, roaming, and sleep.

Test details

 

Associated requirements

Device.Network.WLAN.Base.MeetScanAndConnReq
Device.Network.WLAN.CSBBase.MeetScanAndConnReq
Device.Network.WLAN.CSBNLO.SupportNetworkListOffload
Device.Network.WLAN.NLO.SupportNetworkListOffload

See the device hardware requirements.

Platforms

Windows RT (ARM-based)
Windows 8 (x64)
Windows 8 (x86)
Windows RT 8.1
Windows 8.1 x64
Windows 8.1 x86

Expected run time

~10 minutes

Categories

Certification
Functional

Type

Automated

Running the test

Before you run the test, complete the test setup as described in the test requirements: Wireless LAN (802.11) Testing Prerequisites.

The access point is configured with a random SSID using WPA2PSK/AES.

The following test cases are available in this test:

 

Name Description

UDP

The SUT listens for UDP traffic while the DUT sends UDP traffic. The test passes if UDP traffic is received by the SUT.

TCP

The SUT waits for a TCP connection. The DUT connects to the TCP session and sends data. The test passes if the data was received.

Multicast

The SUT sends multicast data while the DUT receives it. The test passes if multicast data was properly received.

Troubleshooting

For troubleshooting information, see Troubleshooting Wireless LAN (802.11) Tests.

More information

Command syntax

 

Parameter Description

TestDeviceSupports5ghz

Determines whether or not the device supports 5 GHz.

Default value: True

AP1Password

The root password for the first physical access point.

Default value: password

AP1IPAddress

The IP address of the WAN port of the first physical access point.

Default value: 192.168.2.2

AP2Password

The root password for the second physical access point.

Default value: password

AP2IPAddress

The root password for the second physical access point.

Default value: 192.168.2.3

顯示:
© 2014 Microsoft