EN
此内容没有您的语言版本,但有英语版本。

Unexpected Sensor Activity Test (System)

This manual tests monitors for sensor activity when such activities are not expected (for example, no subscribed clients). The monitoring happens over a five minute window, after which the events and the source sensor devices from which the events emanated are listed.

Test details

 

Associated requirements

System.Client.Sensor.Integrated

See the system hardware requirements.

Platforms

Windows RT 8.1
Windows 8.1 x64
Windows 8.1 x86

Expected run time

~2 minutes

Categories

Certification
Functional

Type

Manual

Running the test

Before you run the test, complete the test setup as described in the test requirements: System Client Testing Prerequisites.

Test instructions:

  1. The test prompts you to close any sensor application or service, which may be running in the background.

  2. The test begins the monitoring phase, during which you are encouraged to perform any action that can cause sensor activities, such as the following:

    • Try to change screen orientation.

    • Expose the system to clear skies or GPS repeaters, in an effort to get the GPS fix.

    • Uncover or expose the ALS aperture to a bright light source.

  3. At the end of the monitoring period, you are prompted to replace the system under test to the test environment, possibly to resume the network connection.

  4. Any and all unexpected sensor activities are listed along with their respective source sensor device. If no sensor activity is detected, the test passes.

Troubleshooting

For troubleshooting information, see Troubleshooting System Client Testing.

显示:
© 2014 Microsoft