Exportera (0) Skriv ut
Visa allt
EN
Det här innehållet finns inte tillgängligt på ditt språk men här finns den engelska versionen,

Performing Entity Group Transactions

Updated: August 13, 2014

The Table service supports batch transactions on entities that are in the same table and belong to the same partition group. Multiple Insert Entity, Update Entity, Merge Entity, Delete Entity, Insert Or Replace Entity, and Insert Or Merge Entity operations are supported within a single transaction.

An entity group transaction must meet the following requirements:

  • All entities subject to operations as part of the transaction must have the same PartitionKey value.

  • An entity can appear only once in the transaction, and only one operation may be performed against it.

  • The transaction can include at most 100 entities, and its total payload may be no more than 4 MB in size.

  • All entities are subject to the limitations described in Understanding the Table Service Data Model.

The semantics for entity group transactions are defined by the OData Protocol Specification. The OData specification defines the following concepts for batch requests:

  • A change set is a group of one or more insert, update, or delete operations.

  • A batch is a container of operations, including one or more change sets and query operations.

The Table service supports a subset of the functionality defined by the OData specification:

  • The Table service supports only a single change set within a batch. The change set can include multiple insert, update, and delete operations. If a batch includes more than one change set, the first change set will be processed by the service, and additional change sets will be rejected with status code 400 (Bad Request).

ImportantImportant
Multiple operations against a single entity are not permitted within a change set.

  • Note that a query operation is not permitted within a batch that contains insert, update, or delete operations; it must be submitted singly in the batch.

  • Operations within a change set are processed atomically; that is, all operations in the change set either succeed or fail. Operations are processed in the order they are specified in the change set.

  • The Table service does not support linking operations in a change set.

  • The Table service supports a maximum of 100 operations in a change set.

The following sections describe how to construct a batch request and how to interpret the batch response, and show samples of each.

To perform a batch request via REST, specify the $batch option on the request URI. For example:

https://myaccount.table.core.windows.net/$batch

Note that the request URI does not include the table name.

A batch request is sent to the server with a single POST directive. This request must include the x-ms-version header; the header's value must be set to 2009-04-14 or newer.

The XML payload is a multi-part MIME message containing the batch and the change set. The payload includes two MIME boundaries:

  • A batch boundary encompasses the change set.

  • A change set boundary separates individual insert, update, and delete operations in the batch.

An individual request within the change set is identical to a request made when that operation is being called by itself. For example:

  • To specify the If-Match header on an update, merge, or delete operation, include the header in the set of request headers for the appropriate operation in the change set.

  • To specify the payload format (JSON or ATOM) for each operation in the change set, include the appropriate Content-Type, Accept, Version and DataServiceVersion headers, as explained in details in Payload Format for Table Service Operations.

  • To suppress the response content echo for the Insert Entity, specify the Prefer header with the return-no-content value for each insert operation in the change set. For more information about the Prefer header, see Summary of Table Service Functionality.

The following examples show batch requests containing two Insert Entity operations and a Merge Entity operation. In these examples, since we are not interested in the echo payload in the response for the insert operations, we include the Prefer:return-no-content header.

Batch Request with Atom Payload

POST /$batch HTTP/1.1
User-Agent: Microsoft ADO.NET Data Services
x-ms-version: 2013-08-15
x-ms-date: Thu, 30 Aug 2013 20:45:13 GMT
Authorization: SharedKeyLite myaccount:asOEzsCDS7YEe6oi+bx47KMwbXL0lYZCOlR/oc3FReQ=
Accept: application/atom+xml,application/xml
Accept-Charset: UTF-8
DataServiceVersion: 1.0;NetFx
MaxDataServiceVersion: 2.0;NetFx
Content-Type: multipart/mixed; boundary=batch_a1e9d677-b28b-435e-a89e-87e6a768a431
Host: MyHostName:10002
Prefer: return-no-content
Content-Length: ###

--batch_a1e9d677-b28b-435e-a89e-87e6a768a431
Content-Type: multipart/mixed; boundary=changeset_8a28b620-b4bb-458c-a177-0959fb14c977

--changeset_8a28b620-b4bb-458c-a177-0959fb14c977
Content-Type: application/http
Content-Transfer-Encoding: binary

POST https://myaccount.table.core.windows.net/Blogs HTTP/1.1
Content-ID: 1
Content-Type: application/atom+xml;type=entry
Content-Length: ###

<?xml version="1.0" encoding="utf-8" standalone="yes"?>
<entry xmlns:d="http://schemas.microsoft.com/ado/2007/08/dataservices" xmlns:m="http://schemas.microsoft.com/ado/2007/08/dataservices/metadata" xmlns="http://www.w3.org/2005/Atom">
  <title />
  <updated>2013-08-30T20:45:13.7155321Z</updated>
  <author>
    <name />
  </author>
  <id />
  <content type="application/xml">
    <m:properties>
      <d:PartitionKey>Channel_19</d:PartitionKey>
      <d:RowKey>1</d:RowKey>
      <d:Timestamp m:type="Edm.DateTime">0001-01-01T00:00:00</d:Timestamp>
      <d:Rating m:type="Edm.Int32">9</d:Rating>
      <d:Text>.NET...</d:Title>
    </m:properties>
  </content>
</entry>
--changeset_8a28b620-b4bb-458c-a177-0959fb14c977
Content-Type: application/http
Content-Transfer-Encoding: binary

POST https://myaccount.table.core.windows.net/Blogs HTTP/1.1
Content-ID: 2
Content-Type: application/atom+xml;type=entry
Prefer: return-no-content
Content-Length: ###

<?xml version="1.0" encoding="utf-8" standalone="yes"?>
<entry xmlns:d="http://schemas.microsoft.com/ado/2007/08/dataservices" xmlns:m="http://schemas.microsoft.com/ado/2007/08/dataservices/metadata" xmlns="http://www.w3.org/2005/Atom">
  <title />
  <updated>2013-08-30T20:45:13.7155321Z</updated>
  <author>
    <name />
  </author>
  <id />
  <content type="application/xml">
    <m:properties>
      <d:PartitionKey>Channel_19</d:PartitionKey>
      <d:RowKey>2</d:RowKey>
      <d:Timestamp m:type="Edm.DateTime">0001-01-01T00:00:00</d:Timestamp>
      <d:Rating m:type="Edm.Int32">9</d:Rating>
      <d:Text>Azure...</d:Title>
    </m:properties>
  </content>
</entry>
--changeset_8a28b620-b4bb-458c-a177-0959fb14c977
Content-Type: application/http
Content-Transfer-Encoding: binary

MERGE https://myaccount.table.core.windows.net/Blogs(PartitionKey='Channel_19', RowKey='3') HTTP/1.1
Content-ID: 3
Content-Type: application/atom+xml;type=entry
Content-Length: ###

<?xml version="1.0" encoding="utf-8" standalone="yes"?>
<entry xmlns:d="http://schemas.microsoft.com/ado/2007/08/dataservices" xmlns:m="http://schemas.microsoft.com/ado/2007/08/dataservices/metadata" xmlns="http://www.w3.org/2005/Atom">
  <title />
  <updated>2013-08-30T20:44:09.8869156Z</updated>
  <author>
    <name />
  </author>
  <id>https://myaccount.table.core.windows.net/Blogs(PartitionKey='Channel_19',RowKey='3')</id>

  <content type="application/xml">
    <m:properties>
      <d:PartitionKey>Channel_19</d:PartitionKey>
      <d:RowKey>3</d:RowKey>
      <d:Timestamp m:type="Edm.DateTime">0001-01-01T00:00:00</d:Timestamp>
      <d:Rating m:type="Edm.Int32">9</d:Rating>
      <d:Text>PDC 2008...</d:Title>
    </m:properties>
  </content>
</entry>
--changeset_8a28b620-b4bb-458c-a177-0959fb14c977--
--batch_a1e9d677-b28b-435e-a89e-87e6a768a431—



Batch Request with JSON Payload


POST https://myaccount.table.core.windows.net/$batch HTTP/1.1
x-ms-version: 2013-08-15
Accept-Charset: UTF-8
DataServiceVersion: 3.0;
MaxDataServiceVersion: 3.0;NetFx
Content-Type: multipart/mixed; boundary=batch_a1e9d677-b28b-435e-a89e-87e6a768a431
x-ms-date: Mon, 14 Oct 2013 18:25:49 GMT
Authorization: SharedKey myaccount:50daR38MtfezvbMdKrGJVN+8sjDSn+AaA=
Host: 127.0.0.1:10002
Content-Length: 1323
Connection: Keep-Alive

--batch_a1e9d677-b28b-435e-a89e-87e6a768a431
Content-Type: multipart/mixed; boundary=changeset_8a28b620-b4bb-458c-a177-0959fb14c977

--changeset_8a28b620-b4bb-458c-a177-0959fb14c977
Content-Type: application/http
Content-Transfer-Encoding: binary

POST https://myaccount.table.core.windows.net/Blogs HTTP/1.1
Content-Type: application/json
Accept: application/json;odata=minimalmetadata
Prefer: return-no-content
DataServiceVersion: 3.0;

{"PartitionKey":"Channel_19", "RowKey":"1", "Rating":9, "Text":".NET..."}
--changeset_8a28b620-b4bb-458c-a177-0959fb14c977
Content-Type: application/http
Content-Transfer-Encoding: binary

POST https://myaccount.table.core.windows.net/Blogs HTTP/1.1
Content-Type: application/json
Accept: application/json;odata=minimalmetadata
Prefer: return-no-content
DataServiceVersion: 3.0;

{"PartitionKey":"Channel_17", "RowKey":"2", "Rating":9, "Text":"Azure..."}
--changeset_8a28b620-b4bb-458c-a177-0959fb14c977
Content-Type: application/http
Content-Transfer-Encoding: binary

MERGE https://myaccount.table.core.windows.net/Blogs(PartitionKey='Channel_17', RowKey='3') HTTP/1.1
Content-Type: application/json
Accept: application/json;odata=minimalmetadata
DataServiceVersion: 3.0;

{"PartitionKey":"Channel_19", "RowKey":"3", "Rating":9, "Text":"PDC 2008..."}

--changeset_8a28b620-b4bb-458c-a177-0959fb14c977--
--batch_a1e9d677-b28b-435e-a89e-87e6a768a431

The following examples show a batch request for a query. Note that only a single query may be included in the change set.

Batch Query with ATOM Format

POST /$batch HTTP/1.1
User-Agent: Microsoft ADO.NET Data Services
x-ms-version: 2013-08-15
x-ms-date: Thu, 30 Aug 2013 20:45:13 GMT
Authorization: SharedKeyLite myaccount:asOEzsCDS7YEe6oi+bx47KMwbXL0lYZCOlR/oc3FReQ=
Accept: application/atom+xml,application/xml
Accept-Charset: UTF-8
DataServiceVersion: 3.0;NetFx
MaxDataServiceVersion: 3.0;NetFx
Content-Type: multipart/mixed; boundary=batch_f351702c-c8c8-48c6-af2c-91b809c651ce
Content-Length: ###

--batch_f351702c-c8c8-48c6-af2c-91b809c651ce
Content-Type: application/http
Content-Transfer-Encoding: binary

GET https://myaccount.table.core.windows.net/Blogs(PartitionKey='Channel_19',RowKey='2') HTTP/1.1

--batch_f351702c-c8c8-48c6-af2c-91b809c651ce—

Batch Query with JSON Format

POST https://myaccount.table.core.windows.net/$batch HTTP/1.1
x-ms-version: 2013-08-15
Accept-Charset: UTF-8
DataServiceVersion: 3.0;
MaxDataServiceVersion: 3.0;NetFx
Content-Type: multipart/mixed; boundary=batch_f351702c-c8c8-48c6-af2c-91b809c651ce
x-ms-date: Mon, 14 Oct 2013 19:03:55 GMT
Authorization: SharedKey testaccount1:y6TxCsXeRiR4l1KqihwRJ05Qb5zBk=
Host: 127.0.0.1:10002
Content-Length: 255
Connection: Keep-Alive

--batch_f351702c-c8c8-48c6-af2c-91b809c651ce
Content-Type: application/http
Content-Transfer-Encoding: binary

GET https://myaccount.table.core.windows.net/Blogs(PartitionKey='Channel_19',RowKey='2') HTTP/1.1
Accept: application/json;odata=minimalmetadata

--batch_f351702c-c8c8-48c6-af2c-91b809c651ce

The response returns an overall status code for the batch request, and individual status codes and result fragments for each operation in the change set. The response is a multi-part MIME message that includes a batch boundary and a change set boundary.

The Table service returns a status code for the entire batch request, and one or more status codes for the operations in the change set, depending on whether they succeeded or failed.

Assuming that the batch request has been properly authenticated and has been successfully received by the Table service, the batch request returns status code 202 (Accepted), even if one of the operations in the change set fails. If the batch request itself fails, it fails before any operation in the change set is executed. For example, the batch request may fail due to an authentication error, in which case the status code will indicate that failure.

The operations in a change set are processed atomically; that is, either all operations in the batch succeed, or the entire batch fails. The Table service continues processing operations in the change set until one fails. If an operation fails, all preceding operations in the batch are rolled back. Additionally, entity group transactions execute with snapshot isolation.

The status code for an individual operation within a change set appears within the change set response. When an individual operation fails, the response for the change set indicates status code 400 (Bad Request). Additional error information within the response indicates which operation failed by returning the index of that operation. The index is the sequence number of the command in the payload.

For an example, see the sample error response below.

The following examples show the responses for the batch operations sent in the sample requests shown above.

Response for Request in Atom Format

HTTP/1.1 202 Accepted
Cache-Control: no-cache
Transfer-Encoding: chunked
Content-Type: multipart/mixed; boundary=batchresponse_dc0fea8c-ed83-4aa8-ac9b-bf56a2d46dfb
Server: Windows-Azure-Table/1.0 Microsoft-HTTPAPI/2.0
x-ms-request-id: b4b49b3e-19a9-4091-a280-da76a09da8d4
Date: Thu, 30 Aug 2013 20:44:09 GMT

334
batchresponse_dc0fea8c-ed83-4aa8-ac9b-bf56a2d46dfb 
Content-Type: multipart/mixed; boundary=--changesetresponse_8a28b620-b4bb-458c-a177-0959fb14c977

--changesetresponse_8a28b620-b4bb-458c-a177-0959fb14c977
Content-Type: application/http
Content-Transfer-Encoding: binary

HTTP/1.1 204 No Content
Content-ID: 1
Cache-Control: no-cache
Preference-Applied: return-no-content
ETag: W/"0x8D101F7E4B662C4"
Location: https://myaccount.table.core.windows.net/Blogs(PartitionKey='Channel_19',RowKey='1')
DataServiceVersion: 3.0;

--changesetresponse_8a28b620-b4bb-458c-a177-0959fb14c977
Content-Type: application/http
Content-Transfer-Encoding: binary

HTTP/1.1 204 No Content
Content-ID: 2
Cache-Control: no-cache
Preference-Applied: return-no-content
ETag: W/"0x8C134F7A4B692D8"
Location: https://myaccount.table.core.windows.net/Blogs(PartitionKey='Channel_19',RowKey='2')
DataServiceVersion: 3.0;

--changesetresponse_8a28b620-b4bb-458c-a177-0959fb14c977
Content-Type: application/http
Content-Transfer-Encoding: binary

HTTP/1.1 204 No Content
Content-ID: 3
Cache-Control: no-cache
ETag: W/"0x8A541B7C4D699D7"
DataServiceVersion: 3.0;

--changesetresponse_8a28b620-b4bb-458c-a177-0959fb14c977--
--batchresponse_4c637ba4-b2f8-40f8-8856-c2d10d163a83--

Response for Request in JSON Format

HTTP/1.1 202 Accepted
Cache-Control: no-cache
Content-Type: multipart/mixed; boundary=batchresponse_e69b1c6c-62ff-471e-ab88-9a4aeef0a880
Server: Windows-Azure-Table/1.0 Microsoft-HTTPAPI/2.0
x-ms-request-id: ed9c96eb-9473-4fd9-abf6-fa4dcf0d6295
x-ms-version: 2013-08-15
X-Content-Type-Options: nosniff
Date: Mon, 14 Oct 2013 18:25:49 GMT
Content-Length: 1647

--batchresponse_e69b1c6c-62ff-471e-ab88-9a4aeef0a880
Content-Type: multipart/mixed; boundary=changesetresponse_a6253244-7e21-42a8-a149-479ee9e94a25

--changesetresponse_a6253244-7e21-42a8-a149-479ee9e94a25
Content-Type: application/http
Content-Transfer-Encoding: binary

HTTP/1.1 204 No Content
Content-ID: 1
X-Content-Type-Options: nosniff
Cache-Control: no-cache
Preference-Applied: return-no-content
DataServiceVersion: 3.0;
Location: https://myaccount.table.core.windows.net/Blogs(PartitionKey='Channel_19',RowKey='1')
DataServiceId: https://myaccount.table.core.windows.net/Blogs (PartitionKey='Channel_19',RowKey='1')
ETag: W/"0x8D101F7E4B662C4"


--changesetresponse_a6253244-7e21-42a8-a149-479ee9e94a25
Content-Type: application/http
Content-Transfer-Encoding: binary

HTTP/1.1 204 No Content
Content-ID: 2
X-Content-Type-Options: nosniff
Cache-Control: no-cache
Preference-Applied: return-no-content
DataServiceVersion: 3.0;
Location: https://myaccount.table.core.windows.net/Blogs (PartitionKey='Channel_19',RowKey='2')
DataServiceId: https://myaccount.table.core.windows.net/Blogs (PartitionKey='Channel_19',RowKey='2')
ETag: W/"0x8C134F7A4B692D8"


--changesetresponse_a6253244-7e21-42a8-a149-479ee9e94a25
Content-Type: application/http
Content-Transfer-Encoding: binary

HTTP/1.1 204 No Content
Content-ID: 3
X-Content-Type-Options: nosniff
Cache-Control: no-cache
DataServiceVersion: 1.0;
ETag: W/"0x8A541B7C4D699D7"


--changesetresponse_a6253244-7e21-42a8-a149-479ee9e94a25--
--batchresponse_e69b1c6c-62ff-471e-ab88-9a4aeef0a880--

The following examples show the responses for the queries sent in the sample requests shown above.

Response for Batch Query with ATOM Format

HTTP/1.1 202 Accepted
Cache-Control: no-cache
Transfer-Encoding: chunked
Content-Type: multipart/mixed; boundary=batchresponse_4c637ba4-b2f8-40f8-8856-c2d10d163a83
Server: Windows-Azure-Table/1.0 Microsoft-HTTPAPI/2.0
x-ms-request-id: 9202c4a1-43af-4dc0-baca-aa71f7a7407b
Date: Thu, 30 Aug 2013 20:44:10 GMT

--batchresponse_4c637ba4-b2f8-40f8-8856-c2d10d163a83
Content-Type: application/http
Content-Transfer-Encoding: binary

HTTP/1.1 200 OK
Content-Type: application/atom+xml;charset=utf-8
Cache-Control: no-cache
ETag: W/"0x5B168C7B6E589D2"
DataServiceVersion: 3.0;

<?xml version="1.0" encoding="utf-8" standalone="yes"?>
<entry xml:base="http://127.0.0.1:10002/testaccount1/" xmlns:d="http://schemas.microsoft.com/ado/2007/08/dataservices" xmlns:m="http://schemas.microsoft.com/ado/2007/08/dataservices/metadata" m:etag="W/&quot;0x5B168C7B6E589D2&quot;" xmlns="http://www.w3.org/2005/Atom">
    <id> https://myaccount.table.core.windows.net/Blogs(PartitionKey='Channel_19',RowKey='1')</id>
  <title type="text"></title>
  <updated>2013-08-30T20:44:10Z</updated>
  <author>
    <name />
  </author>
  <link rel="edit" title="Blogs" href=" Blogs(PartitionKey='Channel_19',RowKey='2')" />
  <category term="myaccount.Blogs" scheme="http://schemas.microsoft.com/ado/2007/08/dataservices/scheme" />
  <content type="application/xml">
    <m:properties>
      <d:PartitionKey>Channel_19</d:PartitionKey>
       <d:RowKey>2</d:RowKey>
       <d:Timestamp m:type="Edm.DateTime">2013-08-30T20:44:09.5789464Z</d:Timestamp>
       <d:Text>.Net...</d:RowKey>
      <d:Rating m:type="Edm.Int32">9</d:Rating>
    </m:properties>
  </content>
</entry>
--batchresponse_4c637ba4-b2f8-40f8-8856-c2d10d163a83--

Response for Batch Query with JSON Format

HTTP/1.1 202 Accepted
Cache-Control: no-cache
Content-Type: multipart/mixed; boundary=batchresponse_0a568496-fb38-4a83-9984-5908d7f4c63d
Server: Windows-Azure-Table/1.0 Microsoft-HTTPAPI/2.0
x-ms-request-id: 6f2aafa3-19e9-434c-85f2-d178941c2d4b
x-ms-version: 2013-08-15
X-Content-Type-Options: nosniff
Date: Mon, 14 Oct 2013 19:13:30 GMT
Content-Length: 615

--batchresponse_0a568496-fb38-4a83-9984-5908d7f4c63d
Content-Type: application/http
Content-Transfer-Encoding: binary

HTTP/1.1 200 OK
DataServiceVersion: 3.0;
Content-Type: application/json;odata=minimalmetadata;streaming=true;charset=utf-8
X-Content-Type-Options: nosniff
Cache-Control: no-cache
ETag: W/"0x5B168C7B6E589D2"

{"odata.metadata":" https://myaccount.table.core.windows.net/Blogs/$metadata#Blogs/@Element","PartitionKey":"Channel_19","RowKey":"2","Timestamp":"2013-10-14T18:25:49.8922467Z","Rating":9,"Text":"Azure..."}
--batchresponse_0a568496-fb38-4a83-9984-5908d7f4c63d--

The following examples show responses from batch requests containing an operation that failed. Note that the batch response returns status code 202 (Accepted), but the individual operation that failed returns status code 400 (Bad Request). The additional error information is included in the response body for the failed operation. The code element specifies the storage service error code, whereas the message element begins with the index of the failed operation, followed by the error message string. To determine which operation failed, parse the index value from the message. Operations are indexed beginning at zero.

Error Response for Request in Atom Format

In the Atom example, note that the operation that failed was the fourth operation in the change set. Within the message element, the message begins with the numeral 3, followed by the extended error information.

<message xml:lang="en-US">3:One of the request inputs is not valid.</message>

Here is the complete response:

HTTP/1.1 202 Accepted
Cache-Control: no-cache
Transfer-Encoding: chunked
Content-Type: multipart/mixed; boundary=batchresponse_7ab1553a-7dd6-44e7-8107-bf1ea1ab1876
Server: Windows-Azure-Table/1.0 Microsoft-HTTPAPI/2.0
x-ms-request-id: 45ac953e-a4a5-42ba-9b4d-97bf74a8a32e
Date: Thu, 30 Apr 2009 20:45:13 GMT

6E7
--batchresponse_7ab1553a-7dd6-44e7-8107-bf1ea1ab1876
Content-Type: multipart/mixed; boundary=changesetresponse_6cc856b4-8cb9-41eb-b8d2-bb73475c6cec

--changesetresponse_6cc856b4-8cb9-41eb-b8d2-bb73475c6cec
Content-Type: application/http
Content-Transfer-Encoding: binary

HTTP/1.1 400 Bad Request
Content-ID: 4
Content-Type: application/xml
Cache-Control: no-cache
DataServiceVersion: 1.0;

<?xml version="1.0" encoding="utf-8" standalone="yes"?>
<error xmlns="http://schemas.microsoft.com/ado/2007/08/dataservices/metadata">
  <code>InvalidInput</code>
  <message xml:lang="en-US">3:One of the request inputs is not valid.</message>
</error>
--changesetresponse_6cc856b4-8cb9-41eb-b8d2-bb73475c6cec--
--batchresponse_7ab1553a-7dd6-44e7-8107-bf1ea1ab1876--

Error Response for Request in JSON Format

In the JSON example, note that the operation that failed was the first operation in the change set. Within the message name/value pair, the message begins with the numeral 0, followed by the extended error information.

HTTP/1.1 202 Accepted
Cache-Control: no-cache
Content-Type: multipart/mixed; boundary=batchresponse_4e1c04af-af2b-4cfc-9e35-7677a5efcfca
Server: Windows-Azure-Table/1.0 Microsoft-HTTPAPI/2.0
x-ms-request-id: 8abd3c55-a72e-47ba-ae0b-ba43abeb76ae
x-ms-version: 2013-08-15
X-Content-Type-Options: nosniff
Date: Mon, 14 Oct 2013 19:21:58 GMT
Content-Length: 1051

--batchresponse_4e1c04af-af2b-4cfc-9e35-7677a5efcfca
Content-Type: multipart/mixed; boundary=changesetresponse_e2a26601-bba8-4c1a-8a8c-bb66badcbca1

--changesetresponse_e2a26601-bba8-4c1a-8a8c-bb66badcbca1
Content-Type: application/http
Content-Transfer-Encoding: binary

HTTP/1.1 400 Bad Request
Content-ID: 1
X-Content-Type-Options: nosniff
DataServiceVersion: 3.0;
Content-Type: application/json;odata=minimalmetadata;streaming=true;charset=utf-8

{"odata.error":{"code":"OutOfRangeInput","message":{"lang":"en-US","value":"0:One of the request inputs is out of range.\nRequestId:8abd3c55-a72e-47ba-ae0b-ba43abeb76ae\nTime:2013-10-14T19:21:58.0890048Z}}}
--changesetresponse_e2a26601-bba8-4c1a-8a8c-bb66badcbca1--
--batchresponse_4e1c04af-af2b-4cfc-9e35-7677a5efcfca--

See Also

Concepts

Table Service Concepts

Other Resources

OData Specification

Visa:
© 2014 Microsoft