EN
Данное содержимое не доступно на вашем языке, используйте версию на английском языке.

D0 Coalescing Feature Test

This test validates the D0 packet coalescing functionality for LLMNR v4/v6, SSDP v4/v6, WSD v4/v6 NetBT in the default operating system. It then disables the functionality and repeats the same steps to validate that there is no D0 packet coalescing.

Test details

 

Associated requirements

Device.Network.WLAN.Base.ImplementD0PacketCoalescing
Device.Network.WLAN.CSBBase.MustSupportD0PacketCoalescing

See the device hardware requirements.

Platforms

Windows RT (ARM-based)
Windows 8 (x64)
Windows 8 (x86)
Windows RT 8.1
Windows 8.1 x64
Windows 8.1 x86

Expected run time

~40 minutes

Categories

Certification
Reliability

Type

Automated

Running the test

Before you run the test, complete the test setup as described in the test requirements: Wireless LAN (802.11) Testing Prerequisites.

Network Monitor must be installed on the SoftAP machine, which must then be rebooted. Network Monitor is available from the Microsoft Download Center. This requirement is moved from SUT to AP controller with HCKQFE #4.

Troubleshooting

For troubleshooting information, see Troubleshooting Wireless LAN (802.11) Tests.

More information

Command syntax

 

Parameter Description

AP1Password

The root password for the first physical access point.

AP1IPAddress

The IP address of the WAN port of the first physical access point.

AP2Password

The root password for the second physical access point.

AP2IPAddress

The root password for the second physical access point.

Показ:
© 2014 Microsoft