Развернуть Свернуть

DOT11_PHY_TYPE enumeration

The DOT11_PHY_TYPE enumeration defines an 802.11 PHY and media type.

Syntax


typedef enum _DOT11_PHY_TYPE { 
  dot11_phy_type_unknown     = 0,
  dot11_phy_type_any         = dot11_phy_type_unknown,
  dot11_phy_type_fhss        = 1,
  dot11_phy_type_dsss        = 2,
  dot11_phy_type_irbaseband  = 3,
  dot11_phy_type_ofdm        = 4,
  dot11_phy_type_hrdsss      = 5,
  dot11_phy_type_erp         = 6,
  dot11_phy_type_ht          = 7,
  dot11_phy_type_vht         = 8,
  dot11_phy_type_IHV_start   = 0x80000000,
  dot11_phy_type_IHV_end     = 0xffffffff
} DOT11_PHY_TYPE, *PDOT11_PHY_TYPE;

Constants

dot11_phy_type_unknown

Specifies an unknown or uninitialized PHY type.

dot11_phy_type_any

Specifies an unknown or uninitialized PHY type.

dot11_phy_type_fhss

Specifies a frequency-hopping spread-spectrum (FHSS) PHY.

dot11_phy_type_dsss

Specifies a direct sequence spread spectrum (DSSS) PHY.

dot11_phy_type_irbaseband

Specifies an infrared (IR) baseband PHY.

dot11_phy_type_ofdm

Specifies an orthogonal frequency division multiplexing (OFDM) 802.11a PHY.

dot11_phy_type_hrdsss

Specifies a high-rate DSSS (HRDSSS) 802.11b PHY.

dot11_phy_type_erp

Specifies an extended-rate 802.11g PHY (ERP).

dot11_phy_type_ht

Specifies a high-throughput (HT) 802.11n PHY. Each 802.11n PHY, whether dual-band or not, is specified as this PHY type.

dot11_phy_type_vht

Specifies a very high-throughput (VHT) 802.11ac PHY.

dot11_phy_type_IHV_start

Specifies the start of the range that is used to define proprietary PHY types that are developed by an independent hardware vendor (IHV).

The dot11_phy_type_IHV_start enumerator value is valid only when the miniport driver is operating in Extensible Station (ExtSTA) mode.

dot11_phy_type_IHV_end

Specifies the end of the range that is used to define proprietary PHY types that are developed by an IHV.

The dot11_phy_type_IHV_end enumerator value is valid only when the miniport driver is operating in ExtSTA mode.

Remarks

An IHV can assign a value for its proprietary PHY types from dot11_phy_type_IHV_start through dot11_phy_type_IHV_end. The IHV must assign a unique number from this range for each of its proprietary PHY types.

Requirements

Version

Available in Windows Vista and later versions of the Windows operating systems.

Header

Windot11.h (include Ndis.h)

See also

DOT11_ASSOCIATION_COMPLETION_PARAMETERS
OID_DOT11_RECV_SENSITIVITY_LIST
OID_DOT11_SCAN_REQUEST
OID_DOT11_SUPPORTED_PHY_TYPES

 

 

Send comments about this topic to Microsoft

Показ:
© 2014 Microsoft