EN
이 콘텐츠는 한국어로 제공되지 않아 영어 버전으로 표시됩니다.

DPC ISR Tests

This automated test validates the wireless LAN adapter’s DPC ISR's through a series of connects, disconnects, and sleep or resumes. If the total number of interruptions exceeds the maximum allowed, the test will fail. The total number of interruptions is calculated by multiplying the trace length (in seconds) by 3 and then adding the number of packets received. The test will also fail if 0 interrupts are received.

Test details

 

Associated requirements

Device.Network.WLAN.Base.MinimizeCPUUtilization
Device.Network.WLAN.CSBBase.MinimizeCPUUtilization

See the device hardware requirements.

Platforms

Windows RT (ARM-based)
Windows 8 (x64)
Windows 8 (x86)
Windows RT 8.1
Windows 8.1 x64
Windows 8.1 x86

Expected run time

~15 minutes

Categories

Certification
Functional

Type

Automated

Running the test

Before you run the test, complete the test setup as described in the test requirements: Wireless LAN (802.11) Testing Prerequisites.

Troubleshooting

For troubleshooting information, see Troubleshooting Wireless LAN (802.11) Tests.

More information

Command syntax

 

Parameter Description

AP1Password

The root password for the first physical access point.

AP1IPAddress

The IP address of the WAN port of the first physical access point.

AP2Password

The root password for the second physical access point.

AP2IPAddress

The root password for the second physical access point.

SDIO_Physical_Address

The SDIO physical address of the adapter. This value is obtained from the device manufacturer. This value should be blank on PCIE.

표시:
© 2014 Microsoft