확장 최소화

DOT11_EXTAP_ATTRIBUTES structure

The DOT11_EXTAP_ATTRIBUTES structure defines the physical and operating attributes of the miniport driver and 802.11 station when it operates in Extensible Access Point (ExtAP) mode.

Syntax


typedef struct _DOT11_EXTAP_ATTRIBUTES {
  NDIS_OBJECT_HEADER              Header;
  ULONG                           uScanSSIDListSize;
  ULONG                           uDesiredSSIDListSize;
  ULONG                           uPrivacyExemptionListSize;
  ULONG                           uAssociationTableSize;
  ULONG                           uDefaultKeyTableSize;
  ULONG                           uWEPKeyValueMaxLength;
  BOOLEAN                         bStrictlyOrderedServiceClassImplemented;
  ULONG                           uNumSupportedCountryOrRegionStrings;
  PDOT11_COUNTRY_OR_REGION_STRING pSupportedCountryOrRegionStrings;
  ULONG                           uInfraNumSupportedUcastAlgoPairs;
  PDOT11_AUTH_CIPHER_PAIR         pInfraSupportedUcastAlgoPairs;
  ULONG                           uInfraNumSupportedMcastAlgoPairs;
  PDOT11_AUTH_CIPHER_PAIR         pInfraSupportedMcastAlgoPairs;
} DOT11_EXTAP_ATTRIBUTES, *PDOT11_EXTAP_ATTRIBUTES;

Members

Header

The type, revision, and size of the DOT11_EXTAP_ATTRIBUTES structure. This member is formatted as an NDIS_OBJECT_HEADER structure.

The miniport driver must set the members of Header to the following values:

Type

This member must be set to NDIS_OBJECT_TYPE_DEFAULT.

Revision

This member must be set to DOT11_EXTAP_ATTRIBUTES_REVISION_1.

Size

This member must be set to sizeof(DOT11_EXTAP_ATTRIBUTES).

For more information about these members, see NDIS_OBJECT_HEADER.

uScanSSIDListSize

The maximum number of service set identifiers (SSIDs) supported by the 802.11 station for scan operations. The 802.11 station must support an SSID list of at least four entries.

The SSID list that the 802.11 station uses for scanning is specified when OID_DOT11_SCAN_REQUEST is set.

uDesiredSSIDListSize

The maximum number of entries in the desired list of basic service set identifiers (BSSIDs) supported by the 802.11 station. The 802.11 station must support a BSSID list with at least one entry.

For more information about the desired BSSID list, see OID_DOT11_DESIRED_BSSID_LIST.

uPrivacyExemptionListSize

The maximum number of entries in the privacy exemption list supported by the 802.11 station. The 802.11 station must support a privacy exemption list with at least one entry.

For more information about the privacy exemption list, see OID_DOT11_PRIVACY_EXEMPTION_LIST.

uAssociationTableSize

The maximum number of associations that the 802.11 station can support simultaneously. The 802.11 station must support an association list that has at least one entry. A NIC should typically be able to support at least 32 associations simultaneously.

If the NIC supports any authentication and cipher algorithms that require key-Mapping keys, it must support at least the number of entries in its key-mapping key table.

uDefaultKeyTableSize

The maximum number of cipher keys the 802.11 station supports for the default key and per-station default key tables.

For standard 802.11 cipher algorithms, the 802.11 station must support a table size of at least four cipher keys. For cipher algorithms developed by the independent hardware vendor (IHV), the table size can be four or greater.

uWEPKeyValueMaxLength

The maximum length, in bytes, of a WEP cipher key supported by the 802.11 station.

The following table lists the minimum and maximum key lengths, in bytes, for the various WEP cipher values defined through DOT11_CIPHER_ALGORITHM.

WEP cipher Minimum key length Maximum key length

DOT11_CIPHER_ALGO_WEP40

5

5

DOT11_CIPHER_ALGO_WEP104

13

13

DOT11_CIPHER_ALGO_WEP

13

Any length supported by the 802.11 station

 

bStrictlyOrderedServiceClassImplemented

A Boolean value that, if set to TRUE, specifies that the 802.11 station supports the IEEE 802.11 StrictlyOrdered service class for media access control (MAC) service data unit (MSDU) packet delivery.

For more information about the StrictlyOrdered service class, refer to Clause 5.1.3 of the IEEE 802.11-2012 standard.

uNumSupportedCountryOrRegionStrings

The number of country or region strings supported by the 802.11 station. If the 802.11 station supports multiple regulatory domains as specified by the IEEE 802.11d-2001 standard, each country or region string identifies a regulatory domain supported by the 802.11 station.

If the 802.11 station does not support the IEEE 802.11d-2001 standard, the miniport driver must set uNumSupportedCountryOrRegionStrings to zero.

pSupportedCountryOrRegionStrings

A pointer to an array of 802.11d country or region strings that are supported by the 802.11 station. Each entry in the array is formatted as a DOT11_COUNTRY_OR_REGION_STRING structure.

uInfraNumSupportedUcastAlgoPairs

The number of authentication and cipher algorithms supported by the 802.11 station for sending and receiving unicast packets when configured for operation in an infrastructure basic service set (BSS) network. The uInfraNumSupportedUcastAlgoPairs member must be the number of DOT11_AUTH_CIPHER_PAIR structures in the array referenced by the pInfraSupportedUcastAlgoPairs member.

pInfraSupportedUcastAlgoPairs

A pointer to an array of authentication and cipher algorithms supported by the 802.11 station for sending and receiving unicast packets in an infrastructure BSS network. Each entry in the array is formatted as a DOT11_AUTH_CIPHER_PAIR structure.

uInfraNumSupportedMcastAlgoPairs

The number of authentication and cipher algorithms supported by the 802.11 station for sending and receiving multicast and broadcast packets when configured for operation in an infrastructure basic service set (BSS) network. The uInfraNumSupportedMcastAlgoPairs member must be the number of DOT11_AUTH_CIPHER_PAIR structures in the array referenced by the pInfraSupportedMcastAlgoPairs member.

pInfraSupportedMcastAlgoPairs

A pointer to an array of authentication and cipher algorithms supported by the 802.11 station for sending and receiving multicast and broadcast packets in an infrastructure BSS network. Each entry in the array is formatted as a DOT11_AUTH_CIPHER_PAIR structure.

Requirements

Version

Available in Windows 7 and later versions of the Windows operating systems.

Header

Windot11.h (include Ndis.h)

See also

DOT11_AUTH_CIPHER_PAIR
DOT11_CIPHER_ALGORITHM
DOT11_COUNTRY_OR_REGION_STRING
DOT11_EXTAP_ATTRIBUTES
NDIS_OBJECT_HEADER
OID_DOT11_DESIRED_BSSID_LIST
OID_DOT11_PRIVACY_EXEMPTION_LIST
OID_DOT11_SCAN_REQUEST

 

 

Send comments about this topic to Microsoft

표시:
© 2014 Microsoft