展開 最小化
EN
このコンテンツは設定された言語で表示できません。英語版のページが表示されます。

Bluetooth - Bluetooth 2.1 Logo Tests (Windows v6.3)

This automated test verifies that mandatory Bluetooth 2.1 features are implemented, such as Secure Simple Pairing (SSP) and Extended Inquiry Response (EIR). Certification tests verify the previous features by running different combinations of tests on selected Bluetooth hardware.

Test details

 

Associated requirements

Device.BusController.Bluetooth.Base.4LeSpecification
Device.BusController.Bluetooth.Base.SupportsBluetooth21AndEdr

See the device hardware requirements.

Platforms

Windows RT 8.1
Windows 8.1 x64
Windows 8.1 x86

Expected run time

~30 minutes

Categories

Certification
Functional

Type

Automated

Running the test

Before you run the test, complete the test setup as described in the test requirements: Bluetooth Controller Testing Prerequisites.

  • This test requires two test computers (one acts as Primary, the other Secondary). The test computers must have the same operating system and have a Bluetooth 2.1 compliant radio. The primary test computer must have the radio being certified for logo (Device Under Test).

  • The Bluetooth radio must use the Microsoft Bluetooth Driver Stack for testing.

Enabling collection of Event Tracing for Windows (ETW) traces assists with diagnosing test failures.

These traces capture the HCI traffic sent to and from the Bluetooth stack. They can be decoded using Netmon and the Bluetooth ETW parsers. It is recommended to first investigate the issue internally using these traces or some other method of capturing over-the-air traces because many controller/stack inter-operability issues can be observed in these traces.

You can view the collected logs using Netmon and the Bluetooth NPL parsers. These parsers can be obtained through installing the WDK.

Troubleshooting

For troubleshooting information, see Troubleshooting Bus Controller Testing.

More information

Tests are copied locally to the WTTJobsWorking directory and logs are copied to the default Logs server. This test completes the following individual test cases:

 

Test ID Title Description Procedures Timeout (seconds)

VerifyAuthForAuthMethOOB

Verify that authentication succeeds for authentication method OOB

Verify authentication procedure when out-of-band data is present

Master initiates the authentication. Master uses subordinate OOB data for authentication. Verify callback function registered should not be called. Verify authentication successes for authentication method OOB

100

VerifyEventLogNotGenForDebugEnabled

Verify event log message is not generated on debug system when both of the system is in debug enabled mode

Verify debug mode supported by BT radio

Master and subordinate registers for authentication. Master and subordinate is in debug mode and initiates the authentication. Verify that authentication succeed and on no event log is generated on both computers.

120

VerifyAuthForIOCapMxSx

Verify authentication procedure for various authentication method as defined in BT specification when different IO capability is specified by system

Possible IO capabilities are as follows:

  • DisplayOnly - 0

  • DisplayYesNo - 1

  • KeyBoardOnly - 2

  • NoInputNoOutput - 3

In Test names M stands for Master Device IO capability and S stands for Subordinate Device IO Capability

[This content isn't available yet.]

VerifyAuthForIOCapM0S0

Verify authentication successes for authentication method LEGACY when master and subordinate has device capability set to NoInputNoOutput

See VerifyAuthForIOCapMxSx Tests Description.

Verify authentication successes for IOCapabilities DisplayOnly for master and subordinate

Master and subordinate registers for authentication. Master initiates the authentication and Subordinate accepts authentication request and sent positive response. Verify that authentication succeed

WarningWarning
Make sure that the correct configuration test case is executed before setting I/O capabilities

100

VerifyAuthForIOCapM0S1

Verify authentication successes for IOCapabilities DisplayOnly for master and DisplayYesNo for subordinate

See VerifyAuthForIOCapMxSx Tests Description. Verify authentication successes for IOCapabilities DisplayOnly for master and DisplayYesNo for subordinate

Master and subordinate registers for authentication with IOCapabilities DisplayOnly on master and DisplayYesNo on Subordinate. Master initiates the authentication, subordinateaccepts authentication request and sent positive response. Verify that authentication succeed

100

VerifyAuthForIOCapM0S2

Verify authentication successes for IO capabilities DisplayOnly for master and KeyboardOnly for subordinate.

WarningWarning
See VerifyAuthForIOCapMxSx Tests Description

Verify authentication successes for IOCapabilities DisplayOnly for master and KeyBoardOnly for subordinate

Master and subordinate registers for authentication with IOCapabilities display only on master and Display YesNo on Subordinate. Master initiates the authentication, Subordinate accepts authentication request and sent positive response. Verify that authentication succeed.

100

VerifyAuthForIOCapM0S3

Verify authentication successes for IO capabilities DisplayOnly for master and NoInputNoOutput for subordinate

See VerifyAuthForIOCapMxSx Tests Description Verify authentication successes for IOCapabilities DisplayOnly for master and NoInputNoOutput for subordinate

Master and subordinate registers for authentication with IOCapabilities display only on master and NoInputNoOutput on Subordinate. Master initiates the authentication, subordinate accepts authentication request and sent positive response. Verify that authentication succeed.

100

VerifyAuthForIOCapM1S0

Verify authentication successes for IO capabilities DisplayYesNo for master and DisplayOnly for subordinate

See VerifyAuthForIOCapMxSx Tests Description. Verify authentication successes for IOCapabilities DisplayYesNo for master and DisplayOnly for subordinate.

Master and subordinate registers for authentication with IOCapabilities display only on both. Master initiates the authentication, subordinate accepts authentication request and sent positive response. Verify that authentication succeed.

100

VerifyAuthForIOCapM1S1

Verify authentication successes for IO capabilities DisplayYesNo for both master and subordinate

See VerifyAuthForIOCapMxSx Tests Description Verify authentication successes for IOCapabilities DisplayYesNo for master and subordinate.

Master and subordinate registers for authentication with IOCapabilities displayYesNo on both. Master initiates the authentication, subordinate accepts authentication request and sent positive response. Verify that authentication succeed.

100

VerifyAuthForIOCapM1S2

Verify authentication successes for IO capability DisplayYesNo for master and KeyboardOnly for subordinate

See VerifyAuthForIOCapMxSx Tests Description. Verify authentication successes for IOCapabilities DisplayYesNo for master and KeyBoardOnly for subordinate

Master and subordinate registers for authentication with IOCapabilities DisplayYesNo for master and KeyBoardOnly on SubordinateMaster initiates the authentication, subordinate accepts authentication request and sent positive response. Verify that authentication succeed.

100

VerifyAuthForIOCapM1S3

Verify authentication successes for IO capabilities DisplayYesNo for master and NoInputNoOutput for subordinate

See VerifyAuthForIOCapMxSx Tests Description. Verify authentication successes for IOCapabilities DisplayYesNo for master and KeyBoardOnly for subordinate

Master and subordinate registers for authentication with IOCapabilities display YesNo on master and NoInputNoOutput on SubordinateMaster initiates the authentication, subordinate accepts authentication request and sent positive response. Verify that authentication succeed.

100

VerifyAuthForIOCapM2S0

Verify authentication successes for IOCapabilities KeyBoardOnly for master and DisplayOnly for subordinate

See VerifyAuthForIOCapMxSx Tests Description. Verify authentication successes for IOCapabilities KeyBoardOnly for master and DisplayOnly for subordinate.

Master and subordinate registers for authentication with IOCapabilities KeyBoardOnly on master and DisplayOnly on Subordinate Master initiates the authentication, subordinate accepts authentication request and sent positive response. Verify that authentication succeed.

100

VerifyAuthForIOCapM2S1

Verify authentication successes for IOcapabilities KeyBoardOnly for master and DisplayYesNo for subordinate

See VerifyAuthForIOCapMxSx Tests Description Verify authentication successes for IOCapabilities KeyBoardOnly for master and DisplayYesNo for subordinate

Master and subordinate registers for authentication with IOcapabilities KeyBoardOnly for master and DisplayYesNo for subordinate. Master initiates the authentication subordinate accepts authentication request and sent positive response. Verify that authentication succeed.

100

VerifyAuthForIOCapM2S2

Verify authentication successes for IO capabilities KeyBoardOnly for master and subordinate

See VerifyAuthForIOCapMxSx Tests Description. Verify authentication successes for IOCapabilities KeyBoardOnly for master and DisplayYesNo for subordinate.

Master and subordinate registers for authentication with IOCapabilities KeyBoardOnly on both. Master initiates the authentication, subordinate accepts authentication request and sent positive response. Verify that authentication succeed.

100

VerifyAuthForIOCapM2S3

Verify authentication successes for IO capabilities KeyBoardOnly for master and NoInputNoOutput for subordinate

See VerifyAuthForIOCapMxSx Tests Description. Verify authentication successes for IOCapabilities KeyBoardOnly for Master and NoInputNoOutput for subordinate.

Master and subordinate registers for authentication with IOCapabilities KeyBoardOnly on master and NoInputNoOutput on Subordinate Master initiates the authentication, subordinate accepts authentication request and sent positive response. Verify that authentication succeed.

100

VerifyAuthForIOCapM3S0

Verify authentication successes for IO capabilities NoInputNoOutput for master and DisplayOnly for subordinate

See VerifyAuthForIOCapMxSx Tests Description. Verify authentication successes for IOCapabilities NoInputNoOutput for Master and DisplayOnly for subordinate.

Master and subordinate registers for authentication with IOCapabilities NoInputNoOutput for master and DisplayOnly for Subordinate. Master initiates the authentication, subordinate accepts authentication request and sent positive response. Verify that authentication succeed.

100

VerifyAuthForIOCapM3S1

Verify authentication successes for IO capability NoInputNoOutput for master and DisplayYesNo for subordinate

See VerifyAuthForIOCapMxSx Tests Description. Verify authentication successes for IOCapabilities NoInputNoOutput for Master and DisplayYesNo for subordinate

Master and subordinate registers for authentication with IOCapabilities NoInputNoOutput for master and DislpayYesNo for Subordinate. Master initiates the authentication, subordinate accepts authentication request and sent positive response. Verify that authentication succeed.

100

VerifyAuthForIOCapM3S2

Verify authentication successes for IO capabilities NoInputNoOutput for master and KeyBoradOnly for Subordinate.

See VerifyAuthForIOCapMxSx Tests Description. Verify authentication successes for IOCapabilities NoInputNoOutput for Master and KeyBoardOnly for subordinate.

Procedures: Master and subordinate registers for authentication with IOCapabilities NoInputNoOutput for Master and KeyBoardOnly for Subordinate. Master initiates the authentication, subordinate accepts authentication request and sent positive response. Verify that authentication succeed.

100

VerifyAuthForIOCapM3S3

Verify authentication successes for IO capabilities NoInputNoOutput for master and Subordinate.

See VerifyAuthForIOCapMxSx Tests Description. Verify authentication successes for IOCapabilities NoInputNoOutput for Master and Subordinate.

Master and subordinate registers for authentication with IOCapabilities NoInputNoOutput for both Master and Subordinate. Master initiates the authentication, subordinate accepts authentication request and sent positive response. Verify that authentication succeed.

100

EIREE1.1

Complete EIR name is present and not null

Complete EIR name is present and not null

[This content isn't available yet.]

250

EIREE1.2

Partial EIR name is present and not null

Partial EIR name is present and not null

[This content isn't available yet.]

250

EIREE1.3

Complete EIR name is present and null.

Complete EIR name is present and null

[This content isn't available yet.]

110

EIREE1.4

Partial EIR name is present and null

Partial EIR name is present and null

[This content isn't available yet.]

125

Parameters

 

Parameter Description

ENABLETRACING

Enables collection of ETW traces. If True, the ETW traces are enabled on the collection. If False, the ETW traces on the collection are turned off.

Default value: False

Command syntax

 

Command option Description

Mjolnir

Runs TCM file test cases

-m [test machine name]

Test machine name

-c [string]

TCM file name

-l [string]

Log file name

noteNote
For command line help for this test binary, type /h.

File list

 

File Location

BTHLOGO.tcm

<[testbinroot]>\nttest\driverstest\bluetooth_test\tcm

Hct.tcm

<[testbinroot]>\nttest\driverstest\bluetooth_test\tcm

Mjolnir.exe

<[testbinroot]>\nttest\driverstest\bluetooth_test

Scatternet.tcm

<[testbinroot]>\nttest\driverstest\bluetooth_test\tcm

Sco_hct.tcm

<[testbinroot]>\nttest\driverstest\bluetooth_test\tcm

Testutils.dll

<[testbinroot]>\nttest\driverstest\bluetooth_test

testutilsu.dll

<[testbinroot]>\nttest\driverstest\bluetooth_test

表示:
© 2014 Microsoft