Allocating Controller Objects for I/O Operations

After a driver that uses a controller object has started its device, it is ready to process IRPs sent to its target device objects. Whenever an IRP requires the driver to program the physical device represented by the controller object for an I/O operation, the driver calls IoAllocateController. The following figure illustrates such a call.

Diagram illustrating allocating a controller object for I/O

As the previous figure shows, a driver must supply more than the ControllerObject pointer that was returned by IoCreateController when it calls IoAllocateController. Along with this pointer, it must pass pointers to the device object representing the target of the current I/O request, to a driver-supplied ControllerControl routine, and to whatever Context its ControllerControl routine will need to set up the device for the requested I/O operation.

IoAllocateController queues the driver-supplied ControllerControl routine if the device represented by the controller object is busy. Otherwise, the ControllerControl routine is called immediately with the input parameters shown in the previous figure. The input Context pointer to IoAllocateController is passed to the driver's ControllerControl routine when it is run.

Use the following guidelines to determine where to store context information:

  • The driver-supplied context area should not be in the controller extension unless the driver processes each IRP to completion before starting another operation on the physical controller. Otherwise, a context area in the controller extension could be overwritten by other driver routines or on receipt of a new IRP.

  • Even if the driver overlaps a device I/O operation for another device object, a context area in the device extension of the target device object cannot be overwritten.

  • If another I/O request is made for a particular device object and the driver has a StartIo routine, a context area in its device extension also cannot be overwritten because the incoming IRP will be queued when the driver calls IoStartPacket and the same IRP will remain in the device queue until the driver calls IoStartNextPacket just before it completes the current IRP for that device object.

The I/O manager passes a pointer to the DeviceObject->CurrentIrp to a ControllerControl routine if the driver has a StartIo routine. If a driver manages its own queuing of IRPs instead of having a StartIo routine, the I/O manager cannot give the ControllerControl routine a pointer to the current IRP. When the driver calls IoAllocateController, it should pass the current IRP as part of the Context-accessible data.

The driver routine that calls IoAllocateController must be executing at IRQL = DISPATCH_LEVEL when the call occurs. A driver that makes this call from its StartIo routine is already running at DISPATCH_LEVEL.

The ControllerControl routine sets up the physical controller for the IRP's requested operation.

As shown in the previous figure, the ControllerControl routine returns a value of type IO_ALLOCATION_ACTION, which can be either of the following system-defined values:

  • If the ControllerControl routine can start another operation on the physical controller, it should return DeallocateObject so the driver can overlap the next requested I/O operation.

    For example, if the ControllerControl routine can program a disk controller for a seek operation on one disk, complete that IRP, and return DeallocateObject, the ControllerControl routine can be called again to program the disk controller for a transfer operation on the other disk if any transfer requests currently are queued to the other disk.

  • If the current IRP requires further processing by other driver routines, the ControllerControl routine must return KeepObject.

    For example, if the driver programs a disk controller for a transfer operation but cannot complete the IRP until the transfer is complete, the ControllerControl routine must return KeepObject.

When a ControllerControl routine returns KeepObject, usually the driver's ISR runs when the device interrupts, and its DpcForIsr or CustomDpc routine completes the I/O operation and the current IRP for the target device object.

Whenever the ControllerControl routine returns KeepObject, the routine that completes the IRP must call IoFreeController. Such a driver routine should call IoFreeController as soon as possible so that its next device I/O operation can be set up promptly.

 

 

Send comments about this topic to Microsoft

Mostra:
© 2014 Microsoft