Information
The topic you requested is included in another documentation set. For convenience, it's displayed below. Choose Switch to see the topic in its original location.
0 out of 1 rated this helpful - Rate this topic

FrameworkElement.MinWidth Property

Gets or sets the minimum width constraint of the element.

Namespace:  System.Windows
Assembly:  PresentationFramework (in PresentationFramework.dll)
XMLNS for XAML: http://schemas.microsoft.com/winfx/2006/xaml/presentation, http://schemas.microsoft.com/netfx/2007/xaml/presentation
[TypeConverterAttribute(typeof(LengthConverter))]
[LocalizabilityAttribute(LocalizationCategory.None, Readability = Readability.Unreadable)]
public double MinWidth { get; set; }
<object MinWidth="double"/>
- or -
<object MinWidth="qualifiedDouble"/>

XAML Values

double

Double

String representation of a Double value equal to or greater than 0.0. This is interpreted as a device-independent unit (1/96th inch) measurement. Strings need not explicitly include decimal points. For instance a value of 1 is acceptable.

The same Double range restrictions as mentioned in the Property Value section apply.

qualifiedDouble

A double value as described above, followed by one of the following unit declaration strings: px, in, cm, pt.

px (default) is device-independent units (1/96th inch per unit)

in is inches; 1in==96px

cm is centimeters; 1cm==(96/2.54) px

pt is points; 1pt==(96/72) px

Property Value

Type: System.Double
The minimum width of the element, in device-independent units (1/96th inch per unit). The default value is 0.0. This value can be any value equal to or greater than 0.0. However, PositiveInfinity is not valid, nor is Double.NaN.

Identifier field

MinWidthProperty

Metadata properties set to true

AffectsMeasure

This is one of three properties on FrameworkElement that specify width information. The other two are Width and MaxWidth. If there is a conflict between these values, the order of application for actual width determination is first MinWidth must be honored, then MaxWidth, and finally if each of these are within bounds, Width.

The value restrictions on the Double value are enforced by a ValidateValueCallback mechanism. If you attempt to set an invalid value, a run-time exception is thrown.

This example visually shows the differences in rendering behavior among the four width-related properties in Windows Presentation Foundation (WPF).

The FrameworkElement class exposes four properties that describe the width characteristics of an element. These four properties can conflict, and when they do, the value that takes precedence is determined as follows: the MinWidth value takes precedence over the MaxWidth value, which in turn takes precedence over the Width value. A fourth property, ActualWidth, is read-only, and reports the actual width as determined by interactions with the layout process.

The following Extensible Application Markup Language (XAML) examples draw a Rectangle element (rect1) as a child of Canvas. You can change the width properties of a Rectangle by using a series of ListBox elements that represent the property values of MinWidth, MaxWidth, and Width. In this manner, the precedence of each property is visually displayed.

<Canvas Height="200" MinWidth="200" Background="#b0c4de" VerticalAlignment="Top"  HorizontalAlignment="Center" Name="myCanvas">
    <Rectangle HorizontalAlignment="Center" Canvas.Top="50" Canvas.Left="50"  Name="rect1" Fill="#4682b4" Width="100" Height="100"/>
</Canvas>


...


    <TextBlock Grid.Row="1" Grid.Column="0" Margin="10,0,0,0" TextWrapping="Wrap">Set the Rectangle Width:</TextBlock>
    <ListBox Grid.Column="1" Grid.Row="1" Margin="10,0,0,0" Width="50" Height="50" SelectionChanged="changeWidth">
      <ListBoxItem>25</ListBoxItem>
      <ListBoxItem>50</ListBoxItem>
      <ListBoxItem>75</ListBoxItem>
      <ListBoxItem>100</ListBoxItem>
      <ListBoxItem>125</ListBoxItem>
      <ListBoxItem>150</ListBoxItem>
      <ListBoxItem>175</ListBoxItem>
      <ListBoxItem>200</ListBoxItem>
      <ListBoxItem>225</ListBoxItem>
      <ListBoxItem>250</ListBoxItem>
    </ListBox>

	<TextBlock Grid.Row="1" Grid.Column="2" Margin="10,0,0,0" TextWrapping="Wrap">Set the Rectangle MinWidth:</TextBlock>
    <ListBox Grid.Column="3" Grid.Row="1" Margin="10,0,0,0" Width="50" Height="50" SelectionChanged="changeMinWidth">
      <ListBoxItem>25</ListBoxItem>
      <ListBoxItem>50</ListBoxItem>
      <ListBoxItem>75</ListBoxItem>
      <ListBoxItem>100</ListBoxItem>
      <ListBoxItem>125</ListBoxItem>
      <ListBoxItem>150</ListBoxItem>
      <ListBoxItem>175</ListBoxItem>
      <ListBoxItem>200</ListBoxItem>
      <ListBoxItem>225</ListBoxItem>
      <ListBoxItem>250</ListBoxItem>
  </ListBox>      

    <TextBlock Grid.Row="1" Grid.Column="4" Margin="10,0,0,0" TextWrapping="Wrap">Set the Rectangle MaxWidth:</TextBlock>
    <ListBox Grid.Column="5" Grid.Row="1" Margin="10,0,0,0" Width="50" Height="50" SelectionChanged="changeMaxWidth">
      <ListBoxItem>25</ListBoxItem>
      <ListBoxItem>50</ListBoxItem>
      <ListBoxItem>75</ListBoxItem>
      <ListBoxItem>100</ListBoxItem>
      <ListBoxItem>125</ListBoxItem>
      <ListBoxItem>150</ListBoxItem>
      <ListBoxItem>175</ListBoxItem>
      <ListBoxItem>200</ListBoxItem>
      <ListBoxItem>225</ListBoxItem>
      <ListBoxItem>250</ListBoxItem>  
    </ListBox>

The following code-behind examples handle the events that the SelectionChanged event raises. Each custom method takes the input from the ListBox, parses the value as a Double, and applies the value to the specified width-related property. The width values are also converted to a string and written to various TextBlock elements (definition of those elements is not shown in the selected XAML).

private void changeWidth(object sender, SelectionChangedEventArgs args)
{
    ListBoxItem li = ((sender as ListBox).SelectedItem as ListBoxItem);
    Double sz1 = Double.Parse(li.Content.ToString());
    rect1.Width = sz1;
    rect1.UpdateLayout();
    txt1.Text = "ActualWidth is set to " + rect1.ActualWidth;
    txt2.Text = "Width is set to " + rect1.Width;
    txt3.Text = "MinWidth is set to " + rect1.MinWidth;
    txt4.Text = "MaxWidth is set to " + rect1.MaxWidth;
}
private void changeMinWidth(object sender, SelectionChangedEventArgs args)
{
    ListBoxItem li = ((sender as ListBox).SelectedItem as ListBoxItem);
    Double sz1 = Double.Parse(li.Content.ToString());
    rect1.MinWidth = sz1;
    rect1.UpdateLayout();
    txt1.Text = "ActualWidth is set to " + rect1.ActualWidth;
    txt2.Text = "Width is set to " + rect1.Width;
    txt3.Text = "MinWidth is set to " + rect1.MinWidth;
    txt4.Text = "MaxWidth is set to " + rect1.MaxWidth;
}
private void changeMaxWidth(object sender, SelectionChangedEventArgs args)
{
    ListBoxItem li = ((sender as ListBox).SelectedItem as ListBoxItem);
    Double sz1 = Double.Parse(li.Content.ToString());
    rect1.MaxWidth = sz1;
    rect1.UpdateLayout();
    txt1.Text = "ActualWidth is set to " + rect1.ActualWidth;
    txt2.Text = "Width is set to " + rect1.Width;
    txt3.Text = "MinWidth is set to " + rect1.MinWidth;
    txt4.Text = "MaxWidth is set to " + rect1.MaxWidth;
}

For the complete sample, see Width Properties Comparison Sample.

.NET Framework

Supported in: 4.5.1, 4.5, 4, 3.5, 3.0

.NET Framework Client Profile

Supported in: 4, 3.5 SP1

Windows Phone 8.1, Windows Phone 8, Windows 8.1, Windows Server 2012 R2, Windows 8, Windows Server 2012, Windows 7, Windows Vista SP2, Windows Server 2008 (Server Core Role not supported), Windows Server 2008 R2 (Server Core Role supported with SP1 or later; Itanium not supported)

The .NET Framework does not support all versions of every platform. For a list of the supported versions, see .NET Framework System Requirements.

Did you find this helpful?
(1500 characters remaining)
Thank you for your feedback
Show:
© 2014 Microsoft. All rights reserved.