Vertical Pairing Logo Test

  • Article

This manual test verifies a device against the Vertical Pairing requirement.

Note

For more information, see the document Installing Wi-Fi Devices Using Rally Vertical Pairing.

Test details

Associated requirement(s)

Device.Connectivity.Network.VerticalPairing.VerticalPairing
Device.Connectivity.Network.VerticalPairing.WCN

See the device hardware requirements.

Platforms

Windows 7 (x64)
Windows 7 (x86)
Windows 8 (x64)
Windows 8 (x86)
Windows Server 2012 (x64)
Windows Server 2008 R2 (x64)

Run time

~10 minutes

Running the test

Before you run the test, complete the test setup as described in the test requirements: USB Device.Connectivity Testing Prerequisites.

In addition, this test requires a Wi-Fi network card that supports SoftAP (for example, D-Link WDA-1320 desktop adapter) on the test computer.

Before you run this test, do the following:

  • Make sure that the hosted network is running and the test computer is connected to it.

  • Make sure that network discovery is enabled on the test computer.

  • Put the test device in provisioning mode.

To run this test:

  1. On the Selection tab select a device (any device), right click and select Add-modify features.

  2. Select Device.Connectivity.Network.VerticalPairing.

  3. On the Tests tab, schedule the Vertical Pairing Logo Test, filling in the parameters at schedule time.

    Parameter Description

    WCNID

    The WCN device uuid (ie “{8fd24345-6000-3e8a-84b7-931ffcbf8fd2}”)

    DevicePin

    The pairing code for the device

    UPnP

    Should the device support UPnP™? (“Required” or “NotRequired”)

    WSD

    Should the device support WSD? (“Required” or “NotRequired”)

    WinQualID

    WinQual Id

    UnPairDevice

    Unpair device on exit? (“True” or “False”)

Troubleshooting

For troubleshooting information, see Troubleshooting Device.Connectivity Testing.