Expand Minimize

System - Sleep and PNP (disable and enable) with IO Before and After (Certification)

This test cycles the system through various sleep states and performs I/O and basic PNP (disable/enable) on devices before and after each sleep state cycle. For more information, see About the Sleep and PNP (disable and enable) with IO Before and After test.

Any failures logged by this test are filtered out with an automatic erratum. Any stop error or hangs observed during the test run must be addressed.

The goal of this test is to ensure that the test system continues to function properly with the test driver installed and loaded on the system.

Test details

 

Associated requirements

System.Fundamentals.Reliability.SystemReliability
System.Fundamentals.SystemUSB.MustIncludeSuperSpeedPort
System.Fundamentals.SystemUSB.USBDevicesandHostControllersWorkAfterPowerCycle
System.Fundamentals.SystemUSB.XHCIControllerSaveState
System.Fundamentals.SystemUSB.XhciSupportsRuntimePowerManagement

See the system hardware requirements.

Platforms

Windows 7 (x64)
Windows 7 (x86)
Windows RT (ARM-based)
Windows 8 (x64)
Windows 8 (x86)
Windows Server 2012 (x64)
Windows Server 2008 R2 (x64)
Windows RT 8.1
Windows 8.1 x64
Windows 8.1 x86
Windows Server 2012 R2

Expected run time

~90 minutes

Categories

Certification

Type

Automated

Running the test

Troubleshooting

For troubleshooting information, seeTroubleshooting Device Fundamentals Reliability Testing by using the Windows HCK.

This test returns Pass or Fail. To review test details, review the test log from Windows Hardware Certification Kit (Windows HCK) Studio.

More information

Parameters

 

Parameter Description

DQ

A WDTF SDEL query that is used to identify the target device(s). For more information about the DQ parameter, see Device Fundamental Test Parameters.

WDTFREMOTESYSTEM

Required ONLY if there is a wired network adapter on the test system AND it does not have an IPv6 gateway address. If determined to be required, please provide an IPv6 address that the NIC can ping to test network I/O (for example: fe80::78b6:810:9c12:46cd).

TestCycles

Number of test cycles.

Default value: 4

IOPeriod

IO period (in minutes).

Default value: 1

Wpa2PskAesSsid

The SSID of a WPA2 AES wireless network that the test can use to test the WiFi adapter. This is only required if the DUT or one of its child devices is a wireless adapter

Default value: kitstestssid

Wpa2PskPassword

The password of a WPA2 AES wireless network that the test can use to test the WiFi adapter. This is only required if the DUT or one of its child devices is a wireless adapter

Default value: password

Command syntax

 

Command Description

TE.exe /inproc /enablewttlogging /appendwttlogging Devfund_Sleep_PNP_DisableEnable_With_IO_BeforeAndAfter_wlk_sysfund.wsc /p:”DQ=[DQ]” /p:”Wpa2PskAesSsid=[Wpa2PskAesSsid]” /p:”Wpa2PskPassword=[Wpa2PskPassword]” /p:”WDTFREMOTESYSTEM=[WDTFREMOTESYSTEM]” /p:”TestCycles=[TestCycles]” /p:”IOPeriod=[IOPeriod]”

Runs the test.

Show:
© 2014 Microsoft