Array Support Data Driven Test Example
This section covers some advanced features of data driven testing by way of example. If you are still covering the basics, you might want to start with a Simple Data Driven Example.
Examples referenced:
ArraySupportDataDrivenExample
CSharpDataDrivenArraySupportExample
Previous sections have already covered the basics of data driven test authoring and execution. The following list discusses the meaning of Arrays in the TAEF Data Driven Testing sense:
- Arrays are variable length, homogeneous type set of elements that are treated as a single parameter.
- To specify an array type, you need to explicitly specify the type of the parameter in the ParameterTypes block and add an Array="true" attribute.
The parameter types that are supported are listed in Parameter Types in Table Data Sources.
If any other data type is specified, the test throws a warning and considers it to be a String. In the case of arrays, the data type would be considered to be of type String[].
The following example shows how to specify that the parameter is an array of one of the basic types. It is important to note that there are no default types allowed in the case of arrays - you must explictly specify the type and set the Array attribute for the parameter to be true.
1 <?xml version="1.0"?>
2 <Data>
3 <Table Id="ArraySupportTable">
4 <ParameterTypes>
5 <ParameterType Name="Size" Array="true">int</ParameterType>
6 <ParameterType Name="Color" Array="true">String</ParameterType>
7 </ParameterTypes>
8 <Row>
9 <Parameter Name="Size">4</Parameter>
10 <Parameter Name="Color">White</Parameter>
11 </Row>
12 <Row>
13 <Parameter Name="Size">
14 <Value>4</Value>
15 <Value>6</Value>
16 <Value>8</Value>
17 </Parameter>
18 <Parameter Name="Color">
19 <Value>Red</Value>
20 <Value>Green</Value>
21 <Value>Blue</Value>
22 </Parameter>
23 </Row>
24 <Row>
25 <Parameter Name="Size">
26 <Value>9</Value>
27 <Value>12</Value>
28 <Value>16</Value>
29 </Parameter>
30 <Parameter Name="Color">Orange</Parameter>
31 </Row>
32 <Row>
33 <Parameter Name="Size">9</Parameter>
34 <Parameter Name="Color">
35 <Value>White</Value>
36 <Value>Black</Value>
37 </Parameter>
38 </Row>
39 </Table>
40 </Data>
Examine the Value tags and the Array attributes in the example above. First, you must explicitly specify the type for both the Size and Color parameters and specify that these parameters are arrays, by setting the Array attribute to true. Then you specify the values in <Value>...</Value> tags. You can have as many <Value> tags as you need to specify any number of values within the array for a given Row's parameter.
Notice lines 9, 10, 30, and 33 in the XML examples above. These entries are single valued array elements. In other words, you may specify single valued array elements directly in the <Parameter> tag without an additional <Value> tag. Also, even though the parameter in the row has only one value, it is still treated as an array of one element and cannot be retrieved otherwise.
Now, take a look at the retrieval APIs.
Native Retrieval
Array elements can be retrieved in native code, by using the WEX::TestExecution::TestDataArray<> template class. See the published header TestData.h for details. The TestDataArray class manages the lifetime of the array elements and provides useful APIs to retrieve specific values within the array:
1 namespace WEX { namespace TestExecution
2 {
3 template <typename T>
4 class TECOMMON_API TestDataArray sealed
5 {
6 ...
7 public:
8 TestDataArray();
9 ~TestDataArray();
10 const size_t GetSize() const;
11 T& operator[](size_t index);
12
13 private:
14 ...
15 };
16 } /* namespace TestExecution */ } /* namespace WEX */
You can obtain the length of the array by calling GetSize and can get a specific element by using the operator [].
The next example shows how to use these functions in the code. Consider the cpp file in the native example:
1 TestDataArray<int> sizes;
2 if (SUCCEEDED(TestData::TryGetValue(L"size", sizes)))
3 {
4 size_t count = sizes.GetSize();
5 for (size_t i = 0; i < count; ++i)
6 {
7 Log::Comment(String().Format(L"Size[%d] retrieved was %d", i, sizes[i]));
8 }
9 }
10
11 TestDataArray<String> colors;
12 if (SUCCEEDED(TestData::TryGetValue(L"color", colors)))
13 {
14 size_t count = colors.GetSize();
15 for (size_t i = 0; i < count; ++i)
16 {
17 Log::Comment(String().Format(L"Color[%d] retrieved was ", i) + colors[i]);
18 }
19 }
First, you define a local TestDataArray of the array type. In this case, sizes is an array of type int and colors is an array of type WEX::Common::String. The API to retrieve an Array is similar to the one that retrieves any variable. You call TestData::TryGetValue, ask it to retrieve the parameter size, and put the value into the local variable sizes.
Note that an attempt to retrieve a non-array specified parameter into an array causes an error and fails the test. Similarly, an attempt to retrieve an array into a non-array variable, even if the array only has one element, causes an error.
If an array parameter is not specified in the XML Row at all, an attempt to retrieve the parameter fails. For example, if a Row looked like:
<Row>
<Parameter Name="Color">
<Value>White</Value>
<Value>Black</Value>
</Parameter>
</Row>
Notice that the parameter Size, which is an array, is not specified in the Row. If you attempt to retrieve Size from the code, the API call would return a failing return code. You could use this to define a default array value.
On the other hand, you can specify an empty array by specifying an empty parameter tag for Size as follows:
<Row>
<Parameter Name="Size"></Parameter>
<Parameter Name="Color">
<Value>White</Value>
<Value>Black</Value>
</Parameter>
</Row>
In this case, an attempt to retrieve size would succeed, but the array size would be 0.
Managed Retrieval
Managed retrieval remains almost the same as before - only you need to make sure to retrieve the values into a local variable of the appropriate array type. Consider the following managed example:
1 Int32[] sizes = m_testContext.DataRow["Size"] as Int32[];
2 foreach (int size in sizes)
3 {
4 Verify.AreNotEqual(size, 0);
5 Console.WriteLine("Size is " + size.ToString());
6 }
7
8 String[] colors = m_testContext.DataRow["Color"] as String[];
9 foreach (String color in colors)
10 {
11 Console.WriteLine("Color is " + color);
12 }
Similar to the native retrieval, if an array parameter is not specified in the XML Row at all, an attempt to retrieve the parameter returns an object of type System.DBNull. For example, if a Row looked like:
<Row>
<Parameter Name="Color">
<Value>White</Value>
<Value>Black</Value>
</Parameter>
</Row>
Notice that the parameter Size, which is an array, is not specified in the Row. If you attempt to retrieve Size from the code, the API call would return an object of type DBNull. If you have any such values in your table, you may want to retrieve them from the context into an object first and take appropriate steps after comparing the type of object against typeof(System.DBNull) or the type that you are exepecting it to be.
On the other hand, you may specify an empty array by specifying an empty parameter tag for Size as follows:
<Row>
<Parameter Name="Size"></Parameter>
<Parameter Name="Color">
<Value>White</Value>
<Value>Black</Value>
</Parameter>
</Row>
In this case, an attempt to retrieve size succeessfully returns an empty array of type System.Int32[].
Execution
Executing data driven tests that support arrays is no different from executing any other data driven test. The only key point of difference is that the sematics of the selection criteria changes in the case of array data parameters to mean "contains" rather than "equals".
To see what this means, assume that you want to select all data driven tests where the Color array contains the value White. To do this, run:
TE.exe Examples\CSharp.DataDriven.Example.dll /select:"@Name='*Array* And @Data:Color='White'"
TE.exe Examples\CPP.DataDriven.Example.dll /select:"@Name='*Array* And @Data:Color='White'"
This command runs the data driven tests with index #0 and #3 in both of the above cases.
You can build more complex queries which say, for example, select only the test in which the color array contains white and the color array contains black, which would only select data driven tests with index #3. As an exercise, try writing and executing this query yourself.
Feedback
Coming soon: Throughout 2024 we will be phasing out GitHub Issues as the feedback mechanism for content and replacing it with a new feedback system. For more information see: https://aka.ms/ContentUserFeedback.
Submit and view feedback for