USBCAMD2 Features

The following features are present in USBCAMD2 (the original USBCAMD minidriver library does not support these features):

  • Automatic Completion of SRBs

    USBCAMD2 can automatically complete SRBs. The original USBCAMD required camera minidrivers to complete SRBs. To specify that USBCAMD2 automatically complete SRBs, pass TRUE in the NeedsCompletion parameter when you call USBCAMD_AdapterReceivePacket.

  • Support for Hardware-Triggered Events Through an Interrupt Pipe

    USBCAMD2 camera minidrivers can register an external trigger event that is signaled through an interrupt pipe. The interrupt can be handled by USBCAMD2. For example, the interrupt pipe can signal the camera minidriver when the snapshot button is pressed. The Still Image (STI) architecture event monitor can be notified of the device event. By pressing the snapshot button, the STI monitor would be notified and a previously registered STI application, associated with the still pin on the camera, can be launched using the STI push model. To configure USBCAMD2 to send the external trigger event, pass the USBCAMD_CamControlFlag_EnableDeviceEvents flag in the CamControlFlag parameter when you call USBCAMD_InitializeNewInterface.

  • Versatile USB Pipe-Configuration Support

    USBCAMD2 supports cameras that use bulk or isochronous pipes to transfer video and still image data. USBCAMD2 queries the minidriver and dynamically builds pipe-configuration information during initialization. The original USBCAMD library assumed preset pipe-configuration information about the number or type of pipes used. You specify pipe-configuration in a USBCAMD_Pipe_Config_Descriptor array that you pass to CamConfigureEx.

  • Still Pin and Capture Pin Support

    USBCAMD2 can expose a still pin to the stream.sys class in addition to the capture pin that the original USBCAMD exposed. The still pin can be exposed for imaging devices that have either dedicated pipes for still pins or that use the same pipe to multiplex both still and video pins. To expose a still pin, you specify the pipe that contains the still image data in the USBCAMD_Pipe_Config_Descriptor array before you pass the array to CamConfigureEx.

  • Improved Support for Plug and Play and Power Management

    USBCAMD2 provides support for Plug and Play in Windows 2000 and later versions, such as surprise device removal. USBCAMD2 also supports system hibernation in Windows XP and later (hibernation support is not present in Windows 98 with no service packs installed, Windows 98 SE, or Windows 2000) and Windows Millennium Edition and later.

 

 

Send comments about this topic to Microsoft

Show:
© 2014 Microsoft