NDIS_STATUS_DOT11_PHY_FREQUENCY_ADOPTED

A miniport driver must make an NDIS_STATUS_DOT11_PHY_FREQUENCY_ADOPTED status indication after it has adopted a channel or frequency to communicate with a peer station on an infrastructure BSS. This indication must be made any time the NIC adopts a new channel or frequency or has started an AP.

The data type for this indication is the DOT11_PHY_FREQUENCY_ADOPTED_PARAMETERS structure.

The NIC should treat the available operating channels or frequencies returned by OID_DOT11_AVAILABLE_CHANNEL_LIST and OID_DOT11_AVAILABLE_FREQUENCY_LIST as suggestions. The NIC is free to adopt its own channel or frequency that meets the local regulatory domain.

The miniport driver calls NdisMIndicateStatusEx to make an NDIS_STATUS_DOT11_PHY_FREQUENCY_ADOPTED indication, and must pass a pointer to an NDIS_STATUS_INDICATION structure through the StatusIndication parameter. When the driver makes this indication, it must set the following members of the NDIS_STATUS_INDICATION structure:

  • StatusCode must be set to NDIS_STATUS_DOT11_PHY_FREQUENCY_ADOPTED.

  • StatusBuffer must be set to the address of a DOT11_PHY_FREQUENCY_ADOPTED_PARAMETERS structure.

  • StatusBufferSize must be set to sizeof(DOT11_PHY_FREQUENCY_ADOPTED_PARAMETERS).

Requirements

Version

Available in Windows 7 and later versions of the Windows operating systems.

Header

Windot11.h (include Ndis.h)

See also

DOT11_PHY_FREQUENCY_ADOPTED_PARAMETERS
NDIS_STATUS_INDICATION
NdisMIndicateStatusEx
OID_DOT11_AVAILABLE_CHANNEL_LIST
OID_DOT11_AVAILABLE_FREQUENCY_LIST

 

 

Send comments about this topic to Microsoft

Show:
© 2014 Microsoft