Extensible Station MIB Objects

Some of the Extensible Station (ExtSTA) object identifiers (OIDs) are used to reference ExtSTA management information base (MIB) objects.

ExtSTA MIB objects are attributes of the IEEE 802.11 media access control (MAC) layer. The miniport driver must set these MIB objects to their default values whenever any of the following occur:

  • The miniport driver's MiniportInitializeEx function is called.

  • A method request of OID_DOT11_RESET_REQUEST is made to reset the MAC layer of the 802.11 station and the bSetDefaultMIB member of the DOT11_RESET_REQUEST structure is TRUE.

The following table lists the ExtSTA OID name and the corresponding ExtSTA MIB object name. For more information about an ExtSTA MIB object, refer to the topic for the specific ExtSTA OID.

ExtSTA OID nameExtSTA MIB object name

OID_DOT11_ACTIVE_PHY_LIST

msDot11ActivePhyList

OID_DOT11_AUTO_CONFIG_ENABLED

msDot11AutoConfigEnabled

OID_DOT11_CURRENT_PHY_ID

msDot11CurrentPhyID

OID_DOT11_DESIRED_BSSID_LIST

msDot11DesiredBSSIDList

OID_DOT11_DESIRED_COUNTRY_OR_REGION_STRING

msDot11DesiredCountryOrRegionString

OID_DOT11_DESIRED_PHY_LIST

msDot11DesiredPhyList

OID_DOT11_DESIRED_SSID_LIST

msDot11DesiredSSIDList

OID_DOT11_HIDDEN_NETWORK_ENABLED

msDot11HiddenNetworkEnabled

OID_DOT11_ENABLED_AUTHENTICATION_ALGORITHM

msDot11EnabledAuthAlgo

OID_DOT11_ENABLED_MULTICAST_CIPHER_ALGORITHM

msDot11EnabledMulticastCipherAlgo

OID_DOT11_ENABLED_UNICAST_CIPHER_ALGORITHM

msDot11EnabledUnicastCipherAlgo

OID_DOT11_EXCLUDED_MAC_ADDRESS_LIST

msDot11ExcludedMacAddressList

OID_DOT11_HARDWARE_PHY_STATE

msDot11HardwarePHYState

OID_DOT11_MEDIA_STREAMING_ENABLED

msDot11MediaStreamingEnabled

OID_DOT11_POWER_MGMT_REQUEST

msDot11PowerSavingLevel

OID_DOT11_PRIVACY_EXEMPTION_LIST

msDot11PrivacyExemptionList

OID_DOT11_QOS_PARAMS

msDot11QoSParams

OID_DOT11_SAFE_MODE_ENABLED

msDot11SafeModeEnabled

OID_DOT11_UNICAST_USE_GROUP_ENABLED

msDot11UnicastUseGroupEnabled

OID_DOT11_UNREACHABLE_DETECTION_THRESHOLD

msDot11UnreachableDetectionThreshold

 

Unless an ExtSTA MIB object defines a specific default value, the Native 802.11 miniport driver defines its own default value for the MIB object.

Note  When the miniport driver receives an OID_DOT11_RESET_REQUEST method request the miniport driver must reset an ExtSTA MIB object to its default value under the following conditions:

  • When MIB values for the MAC and/or PHY are reset to their default values only if bSetDefaultMIB is set to TRUE.
  • When MAC or PHY values are affected by the value of the dot11ResetType member.
For more information, refer to the topic for the specific ExtSTA OID.

 

 

Send comments about this topic to Microsoft

Show:
© 2014 Microsoft