The I/O Manager sends the IRP_MJ_CREATE request when a new file or directory is being created, or when an existing file, device, directory, or volume is being opened. Normally this IRP is sent on behalf of a user-mode application that has called a Microsoft Win32 function such as CreateFile or on behalf of a kernel-mode component that has called IoCreateFile, IoCreateFileSpecifyDeviceObjectHint, ZwCreateFile, or ZwOpenFile. If the create request is completed successfully, the application or kernel-mode component receives a handle to the file object.
If the target device object is the file system's control device object, the file system driver's dispatch routine must complete the IRP and return an appropriate NTSTATUS value, after setting Irp->IoStatus.Status and Irp->IoStatus.Information to appropriate values.
Otherwise, the file system driver should process the create request.
If the target device object is the filter driver's control device object, the filter driver's dispatch routine must complete the IRP and return an appropriate NTSTATUS value, after setting Irp->IoStatus.Status and Irp->IoStatus.Information to appropriate values.
Otherwise, the filter driver should perform any needed processing and, depending on the nature of the filter, either complete the IRP or pass it down to the next-lower driver on the stack.
Generally, filter drivers should not return STATUS_PENDING in response to IRP_MJ_CREATE. However, if a lower-level driver returns STATUS_PENDING, the filter driver should pass this status value up the driver chain.
File system filter driver writers should note that IoCreateStreamFileObject causes an IRP_MJ_CLEANUP request to be sent to the file system driver stack for the volume. Because file systems often create stream file objects as a side effect of operations other than IRP_MJ_CREATE, it is difficult for filter drivers to reliably detect stream file object creation. Thus a filter driver should expect to receive IRP_MJ_CLEANUP and IRP_MJ_CLOSE requests for previously unseen file objects.
Filter driver writers should also note that, unlike IoCreateStreamFileObject, IoCreateStreamFileObjectLite does not cause an IRP_MJ_CLEANUP request to be sent to the file system driver stack. For this reason, and because file systems often create stream file objects as a side effect of operations other than IRP_MJ_CREATE, it is difficult for filter drivers to reliably detect stream file object creation. Thus filter drivers should expect to receive IRP_MJ_CLOSE requests for previously unseen file objects.
Note When legacy filter drivers re-issue a create in a post-create callback, they must release and set the buffer that is associated with their reparse point (the auxiliary buffer) to NULL. If a legacy filter driver does not free this buffer and set it to NULL, the driver will leak memory. Minifilter drivers do not have to do this because the Filter Manager does this for them.
A file system or filter driver calls IoGetCurrentIrpStackLocation with the given IRP to get a pointer to its own stack location in the IRP, shown in the following list as IrpSp. (The IRP is shown as Irp.) The driver can use the information that is set in the following members of the IRP and the IRP stack location in processing a create request:
Pointer to the target device object.
Pointer to a FILE_FULL_EA_INFORMATION-structured buffer, if the file object represents a file with extended attributes. Otherwise, this member is set to NULL.
The following flags are set for this request:
Indicates the execution mode of the process that requested the operation, either KernelMode or UserMode. Note that if the SL_FORCE_ACCESS_CHECK flag is set, access checks must be performed, even if Irp->RequestorMode is KernelMode.
Pointer to an IO_STATUS_BLOCK structure that receives the final completion status and information about the requested operation. The file system sets the Information member of this structure to one of the following values:
Initial allocation size, in bytes, for the file. A nonzero value has no effect unless the file is being created, overwritten, or superseded.
Pointer to a file object that the I/O Manager creates to represent the file to be created or opened. When the file system processes the IRP_MJ_CREATE request, it sets the FsContext and possibly FsContext2 fields in this file object to values that are file-system-specific. Thus the values of the FsContext and FsContext2 fields cannot be considered valid until after the file system has processed the create request. For more information, see File Streams, Stream Contexts, and Per-Stream Contexts.
FltCancelFileOpen and IoCancelFileOpen set the FO_FILE_OPEN_CANCELLED flag in the file object's Flags field. Setting this flag indicates that the IRP_MJ_CREATE request has been canceled, and an IRP_MJ_CLOSE request will be issued for this file object. Once the create request has been canceled, it cannot be reissued.
The IrpSp->FileObject parameter contains a pointer to the RelatedFileObject field, which is also a FILE_OBECT structure. The RelatedFileObject field of a FILE_OBJECT structure is used to indicate that a given file has been opened relative to an already open file object. This usually indicates that the relative file is a directory but stream-based files may be opened relative to an already existing stream of a file. The RelatedFileObject field of the FILE_OBJECT structure is only valid during the processing of IRP_MJ_CREATE.
One or more of the following:
If this flag is set, file name comparisons should be case-sensitive.
If this flag is set, access checks must be performed even if the value of IRP->RequestorMode is KernelMode.
If this flag is set, the file is a paging file.
If this flag is set, the file's parent directory should be opened.
Size in bytes of the buffer at Irp->AssociatedIrp.SystemBuffer. If the value of Irp->AssociatedIrp.SystemBuffer is NULL, this member must be zero.
Bitmask of attribute flags to be applied when creating or opening the file. Explicitly specified attributes are applied only when the file is created, superseded, or, in some cases, overwritten. By default, this value is FILE_ATTRIBUTE_NORMAL, which can be overridden by any other flag or by an ORed combination of compatible flags. This member corresponds to the FileAttributes parameter to IoCreateFileSpecifyDeviceObjectHint.
Bitmask of flags that specify the options to be applied when creating or opening the file, as well as the action to be taken if the file already exists.
The high 8 bits of this parameter correspond to the Disposition parameter to IoCreateFileSpecifyDeviceObjectHint.
The low 24 bits of this member correspond to the CreateOptions parameter to IoCreateFileSpecifyDeviceObjectHint. File system filter and minifilter drivers that perform file scanning (such as antivirus programs) should pay particular attention to the FILE_COMPLETE_IF_OPLOCKED flag. If this flag is set, the filter must not block or otherwise delay the IRP_MJ_CREATE operation.
If the FILE_COMPLETE_IF_OPLOCKED flag is set in the pre-create (create dispatch) path, the filter must not initiate any of the following types of operations, because they can cause oplock breaks:
If a filter or minifilter cannot honor the FILE_COMPLETE_IF_OPLOCKED flag, it must complete the IRP_MJ_CREATE request with STATUS_SHARING_VIOLATION.
If the FILE_COMPLETE_IF_OPLOCKED flag is set in the completion (post-create) path, the filter should check whether the file system has set Irp->IoStatus.Status to the STATUS_OPLOCK_BREAK_IN_PROGRESS status value. If this status value is not set, it is safe for the filter to initiate one of the above operations on the file. If this status value is set, the oplock has not yet been broken, and the filter must not initiate any operation that can cause an oplock break. Thus the filter must postpone all of the above operations on the file until one of the following conditions is true:
- The owner of the oplock sends an FSCTL_OPLOCK_BREAK_ACKNOWLEDGE request to the file system.
- A system component other than the filter or minifilter sends the file system an I/O request that must wait until the oplock break is complete (such as IRP_MJ_READ or IRP_MJ_WRITE). The filter or minifilter can initiate one of the above operations from its dispatch (or preoperation callback) routine for this new operation, because the dispatch or preoperation callback routine is put into a wait state until the oplock break is complete.
Pointer to an ACCESS_STATE structure containing the object's subject context, granted access types, and remaining desired access types.
ACCESS_MASK structure specifying access rights requested for the file. For more information, see the description of the DesiredAccess parameter to IoCreateFileSpecifyDeviceObjectHint.
Bitmask of share access rights requested for the file. If this member is zero, exclusive access is being requested. For more information, see the description of the ShareAccess parameter to IoCreateFileSpecifyDeviceObjectHint.
- IRP_MJ_CREATE (WDK Kernel Reference)
Build date: 11/16/2013