INF ControlFlags Section
[ControlFlags] ExcludeFromSelect=* | ExcludeFromSelect=device-identification-string[,device-identification-string] ...] | [ExcludeFromSelect.nt=device-identification-string[,device-identification-string] ...] | [ExcludeFromSelect.ntx86=device-identification-string[,device-identification-string] ...] | [ExcludeFromSelect.ntia64=device-identification-string[,device-identification-string] ...] | (Windows XP and later versions of Windows) [ExcludeFromSelect.ntamd64=device-identification-string[,device-identification-string] ...] | (Windows XP and later versions of Windows) [CopyFilesOnly=device-identification-string[,device-identification-string] ...] [InteractiveInstall=device-identification-string[,device-identification-string] ... ] [RequestAdditionalSoftware=*] | [RequestAdditionalSoftware=device-identification-string[,device-identification-string] ...] (Windows 7 and later versions of Windows)
A ControlFlags section identifies devices for which Windows should take certain unique actions during installation.
Removes all (if * is specified) or the specified list of devices from certain user interface displays, from which a user is expected to select a particular device for installation.
For Windows 2000 and later versions of Windows, the specified devices are not displayed by the Add Hardware Wizard, but are displayed by the Found New Hardware Wizard and the Hardware Update Wizard.
To exclude a set of OS-incompatible or platform-incompatible devices from this display, one or more ExcludeFromSelect entries can have the following case-insensitive extensions appended:
Do not display these devices on computers that are running Windows 2000 or later versions of Windows.
Do not display these devices on x86-based computers that are running Windows 2000 or later versions of Windows.
Do not display these devices on Itanium-based computers that are running Windows XP or later versions of Windows.
Do not display these devices on x64-based computers that are running Windows XP or later versions of Windows.
For more information about how to use the system-defined .nt, .ntx86, .ntia64, and .ntamd64 extensions, see Creating INF Files for Multiple Platforms and Operating Systems.
Installs only the INF-specified files for the given devices because the device hardware is not accessible or available yet.
This entry is rarely used. However, it can be used to preinstall the drivers of a device for which the card will later be seated in a particular slot that is currently in use. For example, if a device currently seated in the particular slot is necessary to transfer INF-specified files to the target, the INF would have this entry.
Forces the specified list of devices to be installed in a user's context. Each line can specify one or more hardware IDs or compatible IDs, and there can be one or more lines.
This entry is optional. The preferred way to install devices is to omit this entry and allow Windows to install the device in the context of a trusted system thread, if possible. However, if a device absolutely requires a user to be logged in when the device is installed, include this entry in the device INF.
Specifies that all (if * is specified) or the specified list of devices may require additional software than what was installed through the driver package for the device. For example, the RequestAdditionalSoftware entry can be used to install new or updated device-specific software that was not included in the driver package.
Note If * is not specified, each device specified by a RequestAdditionalSoftware entry must be defined within the INF Models section.
This entry is optional, and is supported in Windows 7 and later versions of Windows operating system.
After Windows installs the driver package for the device, the Plug and Play (PnP) manager performs the following steps if the RequestAdditionalSoftware entry is specified within the INF file:
- The PnP manager generates a Problem Report and Solution (PRS) error report with the type of RequestAddtionalSoftware. This report contains information about the specific hardware ID of the device and the system architecture of the computer.
If there is a solution provided by the independent hardware vendor (IHV) for the device-specific software, the solution is downloaded to the computer.
Note The download of the solution does not install the software itself.
- If the device-specific software is not installed on the computer, the PnP manager presents the solution to the user and provides a link for downloading the software. The user can then choose to download and install this software by following the instructions presented in the solution.
Typically, a ControlFlags section has one or more ExcludeFromSelect entries to identify devices that are listed in the per-manufacturer INF Models section, but which should not be displayed to the end-user as options during manual installations.
The system's Add Hardware Wizard builds a list of installable devices by searching through all available INF files. It extracts information about models/devices from each of these INF files and displays this information to the end-user, unless an INF overrides this behavior by suppressing the display of one or more models/devices in that INF's ControlFlags section.
Listing a device's hardware ID or compatible ID in an ExcludeFromSelect entry removes it from the display shown to the end-user. Specifying an asterisk (*) for the ExcludeFromSelect value removes all devices/models defined in the INF file from this user-visible list.
An INF writer should use the InteractiveInstall directive sparingly and only in the following situations:
- To install drivers for devices that have corrupted or otherwise incorrectly defined hardware IDs. For example, when two or more different devices share the same Hardware ID. This case is strictly forbidden by the Plug and Play standard, but some hardware vendors have made this error in hardware.
- To install drivers for devices that require their own driver and absolutely cannot use the generic class driver or another driver supplied with the operating system. The InteractiveInstall entry forces Device Manager to ask the user for confirmation for compatible ID matches.
Note In the future, WHQL might not grant the Windows Logo to devices whose INF files include InteractiveInstall entries.
INF files that exclusively install PnP devices can have a ControlFlags section unless they set the NoInstallClass value entry in their respective SetupClassGUID registry keys to TRUE. For more information about these registry keys, see INF ClassInstall32 Section.
This example of the ControlFlags section in the system mouse class installer INF suppresses the display of devices/models that cannot be installed on x86 platforms.
[ControlFlags] ; Exclude all bus mice and InPort mice for x86 platforms ExcludeFromSelect.ntx86=*PNP0F0D,*PNP0F11,*PNP0F00,*PNP0F02,*PNP0F15 ; Hide this entry always ExcludeFromSelect=UNKNOWN_MOUSE
The following INF file fragment shows two devices: one that is fully PnP-capable and requires no user intervention during installation and another that requires its own driver and cannot use any other driver. Specifying InteractiveInstall for the second device forces Windows to install this device in a user's context (a user who has administrative rights). This includes prompting the user for the location of the driver files (INF file, driver file, and so on) as required.
; ... [Manufacturer] %Mfg% = ModelsSection [ModelsSection] ; Models section, with two entries %Device1.DeviceDesc% = Device1.Install, \ PCI\VEN_1000&DEV_0001&SUBSYS_00000000&REV_01 %Device2.Device.Desc%= Device2.Install, \ PCI\VEN_1000&DEV_0001&SUBSYS_00000000&REV_02 [ControlFlags] InteractiveInstall = \ PCI\VEN_1000&DEV_0001&SUBSYS_00000000&REV_02 ; ...
Build date: 2/13/2014