Combined Radio - GPS and MBB - PnP Operations

This automated test verifies that systems that support both GPS and Mobile Broadband radio hardware can perform Plug and Play operations on the Mobile Broadband radio without excessive interference to the GPS radio.

This test performs the following operations:

  • Establishes a baseline to ensure that the Mobile Broadband radio can be turned off and on, and that the adapter can be disabled and enabled.

  • Subscribes to GPS data events.

  • Turns off the Mobile Broadband radio, and then turns the radio on.

  • Disables the Mobile Broadband adapter, and then enables the adapter.

  • Unsubscribes to GPS data events.

The GPS data events should continue to be generated during the time that the Mobile Broadband radio and PnP operations occur.

Test details

 

Associated requirements

System.Client.Sensor.Discretional

See the system hardware requirements.

Platforms

Windows 8.1 x64
Windows 8.1 x86

Expected run time

~5 minutes

Categories

Reliability

Type

Automated

Running the test

Before you run the test, complete the test setup as described in the test requirements: System Client Testing Prerequisites.

The test requires Mobile Broadband and GPS signals. The Mobile Broadband radio requires an active SIM.

Troubleshooting

For troubleshooting information, see Troubleshooting System Client Testing.

Command syntax

 

Parameter Description

MBBAccessString

Specifies the access string to use when making a Mobile Broadband connection.

Default value: UseProvisionedInfo

MBBUserName

Specifies the user name to use when making a Mobile Broadband connection.

Default value: UseProvisionedInfo

MBBPassword

Specifies the password to use when making a Mobile Broadband connection.

Default value: UseProvisionedInfo

WebDoc1024K

Specifies a 1024K document to download from the Internet.

Default value: http://www.microsoft.com/windows/using/tools/igd/StaticContent/igdprobedocs/ws/test20.txt

Show:
© 2014 Microsoft