Expand Minimize

Test.MouseMode

This test verifies that device reports properly when put into mouse mode.

Test details

 

Associated requirements

Device.Input.PrecisionTouchpad.HIDCompliance.MouseMode
Device.Input.PrecisionTouchpad.HIDCompliance.SwitchableMode
Device.Input.PrecisionTouchpad.HIDCompliance.TouchpadMode

See the device hardware requirements.

Platforms

Windows RT 8.1
Windows 8.1 x64
Windows 8.1 x86

Expected run time

~2 minutes

Categories

Certification

Type

Manual

Running the test

Before you run the test, complete the test setup as described in the test requirements: Mouse or other Pointing Device Testing Prerequisites.

  1. Turn off test signing by running bcdedit /set testsigning off from an elevated command prompt and then restarting the computer.

  2. Start the test.

  3. Move your finger on touchpad and verify the following:

    • The mouse cursor moves as expected.

    • No PTP is reported. The test should show no contact visualization on the screen, and clicking the pad should not turn the bar green at the bottom of the screen.

  4. If the above conditions are met, press P to manually pass the test. Otherwise, press F to fail the test.

  5. Turn on test signing by running bcdedit /set testsigning on from an elevated command prompt and then restarting the computer.

Troubleshooting

For troubleshooting information, see Troubleshooting Device.Input Testing.

More information

Command syntax

 

Command Description

ptlogo.exe Test.MouseMode.json

Runs the test.

File list

 

File Location

ptlogo.exe

<testbinroot>\input\PrecisionTouchpad\

config.json

<testbinroot>\input\PrecisionTouchpad\

Test.MouseMode.json

<testbinroot>\input\PrecisionTouchpad\

Show:
© 2014 Microsoft