WiFi Direct FastDiscovery Wildcard

This test suite verifies the various required discovery types to be supported by the driver.

Test details

 

Associated requirements

Device.Network.WLAN.CSBWiFiDirect.SupportAtLeast2WiFiDirectPortsConcurrently
Device.Network.WLAN.CSBWiFiDirect.SupportAtLeast4Clients
Device.Network.WLAN.WiFiDirect.SupportAtLeast2WiFiDirectPortsConcurrently
Device.Network.WLAN.WiFiDirect.SupportAtLeast4Clients

See the device hardware requirements.

Platforms

Windows RT (ARM-based)
Windows 8 (x64)
Windows 8 (x86)
Windows RT 8.1
Windows 8.1 x64
Windows 8.1 x86

Expected run time

~6 minutes

Categories

Certification
Reliability

Type

Automated

Running the test

Before you run the test, complete the test setup as described in the test requirements: Wireless LAN (802.11) Testing Prerequisites.

This test suite does the following:

  • The SUT is brought up in discoverable mode.

  • The DUT discovers the SUT in a loop for a fixed amount of time and expects to find the SUT.

  • The DUT and SUT sides will either be connected to the access point or not. All the permutations of NoAP, APConnectBeforeWFD and APConnectAfterWFD are covered.

  • Ping the access point while doing WFD discovery to test multichannel support in the access point.

  • Verify that the access points are on non-social channels.

  • The passing criteria of the tests are based on how quickly the devices were found.

Troubleshooting

For troubleshooting information, see Troubleshooting Wireless LAN (802.11) Tests.

More information

Command syntax

 

Parameter Description

AP1Password

The root password for the first physical access point.

AP1IPAddress

The IP address of the WAN port of the first physical access point.

AP2Password

The root password for the second physical access point.

AP2IPAddress

The root password for the second physical access point.

AP1Channel

The wireless channel configured on the first access point.

AP2Channel

The wireless channel configured on the second access point.

Show:
© 2014 Microsoft