This topic has not yet been rated - Rate this topic

CIM_LANEndpoint class

A communication endpoint which, when its associated interface device is connected to a LAN, may send and receive data frames. LAN endpoints include Ethernet, Token Ring, and FDDI interfaces.

The following syntax is simplified from Managed Object Format (MOF) code and includes all of the inherited properties.

Syntax

class CIM_LANEndpoint : CIM_ProtocolEndpoint
{
  boolean BroadcastResetSupported;
  string  OtherTypeDescription;
  uint16  ProtocolIFType;
  uint16  ProtocolType;
  string  NameFormat;
  string  Name;
  string  LANID;
  uint16  LANType;
  string  OtherLANType;
  string  MACAddress;
  string  AliasAddresses[];
  string  GroupAddresses[];
  uint32  MaxDataSize;
  uint16  ProtocolIFType;
};

Members

The CIM_LANEndpoint class has these types of members:

Properties

Properties

The CIM_LANEndpoint class has these properties.

AliasAddresses

Data type: string array
Access type: Read-only

Other unicast addresses that may be used to communicate with the LAN endpoint.

BroadcastResetSupported

Data type: boolean
Access type: Read-only

A boolean that indicates whether the instrumentation supports the BroadcastReset method.

GroupAddresses

Data type: string array
Access type: Read-only

Multicast addresses to which the LAN endpoint listens.

LANID

Data type: string
Access type: Read-only

A label or identifier for the LAN Segment to which the endpoint is connected. If the endpoint is not currently active/connected or this information is not known, then LANID is NULL.

LANType

Data type: uint16
Access type: Read-only

An indication of the kind of technology used on the LAN. This property is deprecated in lieu of ProtocolType, which is an enumeration inherited from ProtocolEndpoint and which includes the values specified here.

Unknown (0)
Other (1)
Ethernet (2)
TokenRing (3)
FDDI (4)

MACAddress

Data type: string
Access type: Read-only
Qualifiers: MaxLen ( 12 )

The principal unicast address used in communication with the LAN endpoint. The MAC address is formatted as twelve hexadecimal digits (for example, "010203040506"), with each pair representing one of the six octets of the MAC address in "canonical" bit order according to RFC 2469.

MaxDataSize

Data type: uint32
Access type: Read-only
Qualifiers: Units ( "Bits" )

The largest information field that may be sent or received by the LAN endpoint.

Name

Data type: string
Access type: Read-only
Qualifiers: Override, MaxLen ( 256 )

A string that identifies this protocol endpoint with either a port or an interface on a device. To ensure uniqueness, the Name property should be prepended or appended with information from the Type or OtherTypeDescription properties. The method selected is described in the NameFormat property of this class.

NameFormat

Data type: string
Access type: Read-only
Qualifiers: MaxLen ( 256 )

The naming heuristic that is used to ensure that the value of the Name property is unique. For example, you can choose to prepend the name of the port or interface with the Type of ProtocolEndpoint (for example, IPv4) of this instance followed by an underscore.

OtherLANType

Data type: string
Access type: Read-only

A free-form string that describes the type of technology used on the LAN when the value of the LANType property is equal to 1 (that is, "Other"). This property is deprecated because its purpose overlaps with OtherTypeDescription, which is inherited from ProtocolEndpoint.

OtherTypeDescription

Data type: string
Access type: Read-only
Qualifiers: MaxLen ( 64 )

A string that describes the type of protocol endpoint when the Type property of this class (or any of its subclasses) is set to 1 (Other). This property should be set to NULL when the Type property is any value other than 1.

ProtocolIFType

Data type: uint16
Access type: Read-only

An enumeration that is synchronized with the IANA ifType MIB. The ifType MIB is maintained at the URL, http://www.iana.org/assignments/ianaiftype-mib. Additional values defined by the DMTF are also included. The property is used to categorize and classify instances of the ProtocolEndpoint class. Be aware that if the ProtocolIFType is set to 1 (Other), then the type information should be provided in the OtherTypeDescription string property.

0 (Unknown)
1 (Other)
2 (Regular 1822)
3 (HDH 1822)
4 (DDN X.25)
5 (RFC877 X.25)
6 (Ethernet CSMA/CD)
7 (ISO 802.3 CSMA/CD)
8 (ISO 802.4 Token Bus)
9 (ISO 802.5 Token Ring)
10 (ISO 802.6 MAN)
11 (StarLAN)
12 (Proteon 10Mbit)
13 (Proteon 80Mbit)
14 (HyperChannel)
15 (FDDI)
16 (LAP-B)
17 (SDLC)
18 (DS1)
19 (E1)
20 (Basic ISDN)
21 (Primary ISDN)
22 (Proprietary Point-to-Point Serial)
23 (PPP)
24 (Software Loopback)
25 (EON)
26 (Ethernet 3Mbit)
27 (NSIP)
28 (SLIP)
29 (Ultra)
30 (DS3)
31 (SIP)
32 (Frame Relay)
33 (RS-232)
34 (Parallel)
35 (ARCNet)
36 (ARCNet Plus)
37 (ATM)
38 (MIO X.25)
39 (SONET)
40 (X.25 PLE)
41 (ISO 802.211c)
42 (LocalTalk)
43 (SMDS DXI)
44 (Frame Relay Service)
45 (V.35)
46 (HSSI)
47 (HIPPI)
48 (Modem)
49 (AAL5)
50 (SONET Path)
51 (SONET VT)
52 (SMDS ICIP)
53 (Proprietary Virtual/Internal)
54 (Proprietary Multiplexor)
55 (IEEE 802.12)
56 (Fibre Channel)
57 (HIPPI Interface)
58 (Frame Relay Interconnect)
59 (ATM Emulated LAN for 802.3)
60 (ATM Emulated LAN for 802.5)
61 (ATM Emulated Circuit)
62 (Fast Ethernet (100BaseT))
63 (ISDN)
64 (V.11)
65 (V.36)
66 (G703 at 64K)
67 (G703 at 2Mb)
68 (QLLC)
69 (Fast Ethernet 100BaseFX)
70 (Channel)
71 (IEEE 802.11)
72 (IBM 260/370 OEMI Channel)
73 (ESCON)
74 (Data Link Switching)
75 (ISDN S/T Interface)
76 (ISDN U Interface)
77 (LAP-D)
78 (IP Switch)
79 (Remote Source Route Bridging)
80 (ATM Logical)
81 (DS0)
82 (DS0 Bundle)
83 (BSC)
84 (Async)
85 (Combat Net Radio)
86 (ISO 802.5r DTR)
87 (Ext Pos Loc Report System)
88 (AppleTalk Remote Access Protocol)
89 (Proprietary Connectionless)
90 (ITU X.29 Host PAD)
91 (ITU X.3 Terminal PAD)
92 (Frame Relay MPI)
93 (ITU X.213)
94 (ADSL)
95 (RADSL)
96 (SDSL)
97 (VDSL)
98 (ISO 802.5 CRFP)
99 (Myrinet)
100 (Voice Receive and Transmit)
101 (Voice Foreign Exchange Office)
102 (Voice Foreign Exchange Service)
103 (Voice Encapsulation)
104 (Voice over IP)
105 (ATM DXI)
106 (ATM FUNI)
107 (ATM IMA)
108 (PPP Multilink Bundle)
109 (IP over CDLC)
110 (IP over CLAW)
111 (Stack to Stack)
112 (Virtual IP Address)
113 (MPC)
114 (IP over ATM)
115 (ISO 802.5j Fibre Token Ring)
116 (TDLC)
117 (Gigabit Ethernet)
118 (HDLC)
119 (LAP-F)
120 (V.37)
121 (X.25 MLP)
122 (X.25 Hunt Group)
123 (Transp HDLC)
124 (Interleave Channel)
125 (FAST Channel)
126 (IP (for APPN HPR in IP Networks))
127 (CATV MAC Layer)
128 (CATV Downstream)
129 (CATV Upstream)
130 (Avalon 12MPP Switch)
131 (Tunnel)
132 (Coffee)
133 (Circuit Emulation Service)
134 (ATM SubInterface)
135 (Layer 2 VLAN using 802.1Q)
136 (Layer 3 VLAN using IP)
137 (Layer 3 VLAN using IPX)
138 (Digital Power Line)
139 (Multimedia Mail over IP)
140 (DTM)
141 (DCN)
142 (IP Forwarding)
143 (MSDSL)
144 (IEEE 1394)
145 (IF-GSN/HIPPI-6400)
146 (DVB-RCC MAC Layer)
147 (DVB-RCC Downstream)
148 (DVB-RCC Upstream)
149 (ATM Virtual)
150 (MPLS Tunnel)
151 (SRP)
152 (Voice over ATM)
153 (Voice over Frame Relay)
154 (ISDL)
155 (Composite Link)
156 (SS7 Signaling Link)
157 (Proprietary P2P Wireless)
158 (Frame Forward)
159 (RFC1483 Multiprotocol over ATM)
160 (USB)
161 (IEEE 802.3ad Link Aggregate)
162 (BGP Policy Accounting)
163 (FRF .16 Multilink FR)
164 (H.323 Gatekeeper)
165 (H.323 Proxy)
166 (MPLS)
167 (Multi-Frequency Signaling Link)
168 (HDSL-2)
169 (S-HDSL)
170 (DS1 Facility Data Link)
171 (Packet over SONET/SDH)
172 (DVB-ASI Input)
173 (DVB-ASI Output)
174 (Power Line)
175 (Non Facility Associated Signaling)
176 (TR008)
177 (GR303 RDT)
178 (GR303 IDT)
179 (ISUP)
180 (Proprietary Wireless MAC Layer)
181 (Proprietary Wireless Downstream)
182 (Proprietary Wireless Upstream)
183 (HIPERLAN Type 2)
184 (Proprietary Broadband Wireless Access Point to Multipoint)
185 (SONET Overhead Channel)
186 (Digital Wrapper Overhead Channel)
187 (ATM Adaptation Layer 2)
188 (Radio MAC)
189 (ATM Radio)
190 (Inter Machine Trunk)
191 (MVL DSL)
192 (Long Read DSL)
193 (Frame Relay DLCI Endpoint)
194 (ATM VCI Endpoint)
195 (Optical Channel)
196 (Optical Transport)
197 (Proprietary ATM)
198 (Voice over Cable)
199 (Infiniband)
200 (TE Link)
201 (Q.2931)
202 (Virtual Trunk Group)
203 (SIP Trunk Group)
204 (SIP Signaling)
205 (CATV Upstream Channel)
206 (Econet)
207 (FSAN 155Mb PON)
208 (FSAN 622Mb PON)
209 (Transparent Bridge)
210 (Line Group)
211 (Voice E&M Feature Group)
212 (Voice FGD EANA)
213 (Voice DID)
214 (MPEG Transport)
215 (6To4)
216 (GTP)
217 (Paradyne EtherLoop 1)
218 (Paradyne EtherLoop 2)
219 (Optical Channel Group)
220 (HomePNA)
221 (GFP)
222 (ciscoISLvlan)
223 (actelisMetaLOOP)
224 (Fcip)
225..4095 (IANA Reserved)
4096 (IPv4)
4097 (IPv6)
4098 (IPv4/v6)
4099 (IPX)
4100 (DECnet)
4101 (SNA)
4102 (CONP)
4103 (CLNP)
4104 (VINES)
4105 (XNS)
4106 (ISDN B Channel Endpoint)
4107 (ISDN D Channel Endpoint)
4108 (BGP)
4109 (OSPF)
4110 (UDP)
4111 (TCP)
4112 (802.11a)
4113 (802.11b)
4114 (802.11g)
4115 (802.11h)
4200 (NFS)
4201 (CIFS)
4202 (DAFS)
4203 (WebDAV)
4204 (HTTP)
4205 (FTP)
4300 (NDMP)
4301..32767 (DMTF Reserved)
32768.. (Vendor Reserved )

ProtocolIFType

Data type: uint16
Access type: Read-only

The ProtocolIFType enumeration is limited to Layer 2-related and reserved values for this subclass of ProtocolEndpoint.

Other (1)
Ethernet CSMA/CD (6)
ISO 802.5 Token Ring (9)
FDDI (15)
IANA Reserved (225..4095)
DMTF Reserved (4301..32767)
Vendor Reserved (32768..)

ProtocolType

Data type: uint16
Access type: Read-only

Note: This property is deprecated in lieu of the ProtocolIFType enumeration. This deprecation was done to better align the IF-MIB of the IETF and this CIM class. Deprecated description: ProtocolType is an enumeration that provides information to categorize and classify different instances of this class. For most instances, information in this enumeration and the definition of the subclass overlap. However, there are several cases where a specific subclass of ProtocolEndpoint is not required (for example, there is no Fibre Channel subclass of ProtocolEndpoint). Therefore, this property is required to define the type of Endpoint.

Unknown (0)
Other (1)
IPv4 (2)
IPv6 (3)
IPX (4)
AppleTalk (5)
DECnet (6)
SNA (7)
CONP (8)
CLNP (9)
VINES (10)
XNS (11)
ATM (12)
Frame Relay (13)
Ethernet (14)
TokenRing (15)
FDDI (16)
Infiniband (17)
Fibre Channel (18)
ISDN BRI Endpoint (19)
ISDN B Channel Endpoint (20)
ISDN D Channel Endpoint (21)
IPv4/v6 (22)
BGP (23)
OSPF (24)
MPLS (25)
UDP (26)
TCP (27)

Remarks

This documentation is derived from the CIM class descriptions published by the DMTF. Microsoft may have made changes to correct minor errors, conform to Microsoft SDK documentation standards, or provide more information.

Requirements

Namespace	\root\CIMV2

Community Additions

ADD