Information
The topic you requested is included in another documentation set. For convenience, it's displayed below. Choose Switch to see the topic in its original location.

Direct2D QuickStart

Direct2D is a native-code, immediate-mode API for creating 2D graphics. This topic illustrates how to use Direct2D within a typical Win32 application to draw to an HWND.

Note  If you want to create a Windows Store app that uses Direct2D, see the Direct2D Quickstart for Windows 8 topic.

This topic contains the following sections:

Drawing a Simple Rectangle

To draw a rectangle using GDI, you could handle the WM_PAINT message, as shown in the following code.



switch(message)
{

    case WM_PAINT:
        {
            PAINTSTRUCT ps;
            BeginPaint(hwnd, &ps);

            // Obtain the size of the drawing area.
            RECT rc;
            GetClientRect(
                hwnd,
                &rc
            );			

            // Save the original object
            HGDIOBJ original = NULL;
            original = SelectObject(
                ps.hdc,
                GetStockObject(DC_PEN)
            );

            // Create a pen.            
            HPEN blackPen = CreatePen(PS_SOLID, 3, 0);

            // Select the pen.
            SelectObject(ps.hdc, blackPen);

            // Draw a rectangle.
            Rectangle(
                ps.hdc, 
                rc.left + 100, 
                rc.top + 100, 
                rc.right - 100, 
                rc.bottom - 100);	

            DeleteObject(blackPen);

            // Restore the original object
            SelectObject(ps.hdc, original);

            EndPaint(hwnd, &ps);
        }
        return 0;

// Code for handling other messages. 

The code for drawing the same rectangle with Direct2D is similar: it creates drawing resources, describes a shape to draw, draws the shape, then releases the drawing resources. The sections that follow describe each of these steps in detail.

Step 1: Include Direct2D Header

In addition to the headers required for a Win32 application, include the d2d1.h header.

Step 2: Create an ID2D1Factory

One of the first things that any Direct2D example does is create an ID2D1Factory.


ID2D1Factory* pD2DFactory = NULL;
HRESULT hr = D2D1CreateFactory(
    D2D1_FACTORY_TYPE_SINGLE_THREADED,
    &pD2DFactory
    );

The ID2D1Factory interface is the starting point for using Direct2D; use an ID2D1Factory to create Direct2D resources.

When you create a factory, you can specify whether it is multi- or single-threaded. (For more information about multi-threaded factories, see the remarks on the ID2D1Factory reference page.) This example creates a single-threaded factory.

In general, your application should create the factory once and retain it for the life of the application.

Step 3: Create an ID2D1HwndRenderTarget

After you create a factory, use it to create a render target.





// Obtain the size of the drawing area.
RECT rc;
GetClientRect(hwnd, &rc);

// Create a Direct2D render target			
ID2D1HwndRenderTarget* pRT = NULL;			
HRESULT hr = pD2DFactory->CreateHwndRenderTarget(
    D2D1::RenderTargetProperties(),
    D2D1::HwndRenderTargetProperties(
        hwnd,
        D2D1::SizeU(
            rc.right - rc.left,
            rc.bottom - rc.top)
    ),
    &pRT
);

A render target is a device that can perform drawing operations and create device-dependent drawing resources such as brushes. Different types of render targets render to different devices. The preceding example uses an ID2D1HwndRenderTarget, which renders to a portion of the screen.

When possible, a render target uses the GPU to accelerate rendering operations and create drawing resources. Otherwise, the render target uses the CPU to process rendering instructions and create resources. (You can modify this behavior by using the D2D1_RENDER_TARGET_TYPE flags when you create the render target.)

The CreateHwndRenderTarget method takes three parameters. The first parameter, a D2D1_RENDER_TARGET_PROPERTIES struct, specifies remote display options, whether to force the render target to render to software or hardware, and the DPI. The code in this example uses the D2D1::RenderTargetProperties helper function to accept default render target properties.

The second parameter, a D2D1_HWND_RENDER_TARGET_PROPERTIES struct, specifies the HWND to which content is rendered, the initial size of the render target (in pixels), and its presentation options. This example uses the D2D1::HwndRenderTargetProperties helper function to specify an HWND and initial size. It uses default presentation options.

The third parameter is the address of the pointer that receives the render target reference.

When you create a render target and hardware acceleration is available, you allocate resources on the computer's GPU. By creating a render target once and retaining it as long as possible, you gain performance benefits. Your application should create render targets once and hold on to them for the life of the application or until the D2DERR_RECREATE_TARGET error is received. When you receive this error, you need to recreate the render target (and any resources it created).

Step 4: Create a Brush

Like a factory, a render target can create drawing resources. In this example, the render target creates a brush.


ID2D1SolidColorBrush* pBlackBrush = NULL;
if (SUCCEEDED(hr))
{
  			
    pRT->CreateSolidColorBrush(
        D2D1::ColorF(D2D1::ColorF::Black),
        &pBlackBrush
        ); 
}


A brush is an object that paints an area, such as the stroke of a shape or the fill of a geometry. The brush in this example paints an area with a predefined solid color, black.

Direct2D also provides other types of brushes: gradient brushes for painting linear and radial gradients, and a bitmap brush for painting with bitmaps and patterns.

Some drawing APIs provide pens for drawing outlines and brushes for filling shapes. Direct2D is different: it does not provide a pen object but uses a brush for drawing outlines and filling shapes. When drawing outlines, use the ID2D1StrokeStyle interface with a brush to control path stroking operations.

A brush can only be used with the render target that created it and with other render targets in the same resource domain. In general, you should create brushes once and retain them for the life of the render target that created them. ID2D1SolidColorBrush is the lone exception; because it is relatively inexpensive to create, you can create a ID2D1SolidColorBrush every time you draw a frame, without any noticeable performance hit. You can also use a single ID2D1SolidColorBrush and just change its color every time you use it.

Step 5: Draw the Rectangle

Next, use the render target to draw the rectangle.


 
pRT->BeginDraw();

pRT->DrawRectangle(
    D2D1::RectF(
        rc.left + 100.0f,
        rc.top + 100.0f,
        rc.right - 100.0f,
        rc.bottom - 100.0f),
        pBlackBrush);

HRESULT hr = pRT->EndDraw();	 


The DrawRectangle method takes two parameters: the rectangle to be drawn, and the brush to be used to paint the rectangle's outline. Optionally, you can also specify the stroke width, dash pattern, line join, and end cap options.

You must call the BeginDraw method before issuing any drawing commands, and you must call the EndDraw method after you've finished issuing drawing commands. The EndDraw method returns an HRESULT that indicates whether the drawing commands were successful.

Step 6: Release Resources

When there are no more frames to draw, or when you receive the D2DERR_RECREATE_TARGET error, release the render target and any devices it created.


 
SafeRelease(pRT);
SafeRelease(pBlackBrush);


When your application has finished using Direct2D resources (such as when it is about to exit), release the Direct2D factory.


 
SafeRelease(pD2DFactory);


Create a Simple Direct2D Application

The code in this topic shows the basic elements of a Direct2D application. For brevity, the topic omits the application framework and error handling code that is characteristic of a well-written application. For a more detailed walk-through that shows the complete code for creating a simple Direct2D application and demonstrates best design practices, see Creating a Simple Direct2D Application.

Related topics

Creating a Simple Direct2D Application

 

 

Community Additions

Show:
© 2014 Microsoft