This topic has not yet been rated - Rate this topic

Vector3DAnimation.To Property

Gets or sets the animation's ending value. This is a dependency property.

Namespace:  System.Windows.Media.Animation
Assembly:  PresentationCore (in PresentationCore.dll)
XMLNS for XAML: http://schemas.microsoft.com/winfx/2006/xaml/presentation, http://schemas.microsoft.com/netfx/2007/xaml/presentation
public Nullable<Vector3D> To { get; set; }
<object>  <object.To>    <Vector3D />  </object.To></object>
<object To="Vector3D"/>- or -<object To="{x:Null Markup Extension}"/>

Property Value

Type: System.Nullable<Vector3D>
The ending value of the animation. The default value is null.

Identifier field

ToProperty

Metadata properties set to true

None

The following table summarizes how the From, To, and By properties may be used together or separately to determine an animation's target values.

Properties Specified

Resulting Behavior

From

The animation progresses from the value specified by the From property to the base value of the property being animated or to a previous animation's output value, depending on how the previous animation is configured.

From and To

The animation progresses from the value specified by the From property to the value specified by the To property.

From and By

The animation progresses from the value specified by the From property to the value specified by the sum of the From and By properties.

To

The animation progresses from the animated property's base value or a previous animation's output value to the value specified by the To property.

By

The animation progresses from the base value of the property being animated or a previous animation's output value to the sum of that value and the value specified by the By property.

Note   If you set both the To and By properties, the To property takes precedence and the By property is ignored.

To use other interpolation methods or animate between more than two target values, use a Vector3DAnimationUsingKeyFrames object.

The following example shows how to make a 3D object rotate while it "wobbles" by animating the Angle and Axis properties of an AxisAngleRotation3D object. This AxisAngleRotation3D object specifies the rotation transform of the 3D object and so animating its properties creates the desire rotation effect. Within the Storyboard, DoubleAnimation is used to animate the Angle property while Vector3DAnimation is used to animate the Axis property.

<Page xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
  xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" >
  <DockPanel>
    <Viewbox>
      <Canvas Width="321" Height="201">

        <!-- The Viewport3D provides a rendering surface for 3-D visual content. -->
        <Viewport3D Name="MyAnimatedObject"
          ClipToBounds="True" Width="150" Height="150"
          Canvas.Left="0" Canvas.Top="10">

          <!-- Defines the camera used to view the 3D object. -->
          <Viewport3D.Camera>
            <PerspectiveCamera x:Name="myPerspectiveCamera" Position="0,0,2" LookDirection="0,0,-1" 
             FieldOfView="60" />
          </Viewport3D.Camera>

          <!-- The ModelVisual3D children contain the 3D models -->
          <Viewport3D.Children>

            <!-- Two ModelVisual3D define the lights cast in the scene. Without light, the
                 3D object cannot be seen. Also, the direction of the lights affect shadowing. -->
            <ModelVisual3D>
              <ModelVisual3D.Content>
                <DirectionalLight Color="#FFFFFF" Direction="-0.612372,-0.5,-0.612372" />
              </ModelVisual3D.Content>
            </ModelVisual3D>
            <ModelVisual3D>
              <ModelVisual3D.Content>
                <DirectionalLight Color="#FFFFFF" Direction="0.612372,-0.5,-0.612372" />
              </ModelVisual3D.Content>
            </ModelVisual3D>
            <ModelVisual3D>
              <ModelVisual3D.Content>
                <GeometryModel3D>

                  <!-- The geometry specifes the shape of the 3D plane. In this case, a flat sheet is created. -->
                  <GeometryModel3D.Geometry>
                    <MeshGeometry3D
                     TriangleIndices="0,1,2 3,4,5 "
                     Normals="0,0,1 0,0,1 0,0,1 0,0,1 0,0,1 0,0,1 "
                     TextureCoordinates="0,0 1,0 1,1 1,1 0,1 0,0 "
                     Positions="-0.5,-0.5,0.5 0.5,-0.5,0.5 0.5,0.5,0.5 0.5,0.5,0.5 -0.5,0.5,0.5 -0.5,-0.5,0.5 " />
                  </GeometryModel3D.Geometry>

                  <!-- The material specifies the material applied to the plane. In this case it is a linear gradient.-->
                  <GeometryModel3D.Material>
                    <MaterialGroup>
                      <DiffuseMaterial>
                        <DiffuseMaterial.Brush>
                          <LinearGradientBrush StartPoint="0,0.5" EndPoint="1,0.5">
                            <LinearGradientBrush.GradientStops>
                              <GradientStop Color="Yellow" Offset="0" />
                              <GradientStop Color="Red" Offset="0.25" />
                              <GradientStop Color="Blue" Offset="0.75" />
                              <GradientStop Color="LimeGreen" Offset="1" />
                            </LinearGradientBrush.GradientStops>
                          </LinearGradientBrush>
                        </DiffuseMaterial.Brush>
                      </DiffuseMaterial>
                    </MaterialGroup>
                  </GeometryModel3D.Material>

                  <!-- The Transform specifies how to transform the 3D object. The properties of the
                        Rotation object are animated causing the 3D object to rotate and "wobble" (see Storyboard below).-->
                  <GeometryModel3D.Transform>
                    <RotateTransform3D>
                      <RotateTransform3D.Rotation>
                        <AxisAngleRotation3D x:Name="myAngleRotation" Axis="0,3,0" Angle="40" />
                      </RotateTransform3D.Rotation>
                    </RotateTransform3D>
                  </GeometryModel3D.Transform>
                </GeometryModel3D>
              </ModelVisual3D.Content>
            </ModelVisual3D>
          </Viewport3D.Children>

          <!-- Trigger the rotation animation when the 3D object loads. -->
          <Viewport3D.Triggers>
            <EventTrigger RoutedEvent="Viewport3D.Loaded">
              <BeginStoryboard>
                <Storyboard>

                  <!-- This animation animates the Angle property of the AxisAngleRotation3D
                       making the 3D object rotate from -60 degrees to 60 degrees. -->
                  <DoubleAnimation 
                   Storyboard.TargetName="myAngleRotation" 
                   Storyboard.TargetProperty="Angle" 
                   From="-60" To="60" Duration="0:0:4" AutoReverse="True"  RepeatBehavior="Forever"/>

                  <!-- This animation animates the Axis property of the AxisAngleRotation3D
                       making the 3D wobble as it rotates. -->
                  <Vector3DAnimation 
                   Storyboard.TargetName="myAngleRotation" 
                   Storyboard.TargetProperty="Axis" 
                   From="0,3,0" To="1,0,1" Duration="0:0:4" AutoReverse="True"  RepeatBehavior="Forever"/>

                </Storyboard>
              </BeginStoryboard>
            </EventTrigger>
          </Viewport3D.Triggers>
        </Viewport3D>
      </Canvas>

    </Viewbox>
  </DockPanel>
</Page>

More Code

How to: Animate Camera Position and Direction in a 3D Scene The following example shows how to animate the position of a camera and animate the direction it is pointing in a 3D scene. This is done by using Point3DAnimation and Vector3DAnimation to animate the Position and LookDirection properties respectively of the PerspectiveCamera. You might use an animation like this to change the onlooker's view of a scene in response to an event.

Windows 7, Windows Vista, Windows XP SP2, Windows Server 2008 R2, Windows Server 2008, Windows Server 2003

The .NET Framework and .NET Compact Framework do not support all versions of every platform. For a list of the supported versions, see .NET Framework System Requirements.

.NET Framework

Supported in: 3.5, 3.0
Did you find this helpful?
(1500 characters remaining)
Thank you for your feedback

Community Additions

ADD
Show:
© 2014 Microsoft. All rights reserved.