Rotation3DAnimation.To Property

Gets or sets the animation's ending value.

Namespace:  System.Windows.Media.Animation
Assembly:  PresentationCore (in PresentationCore.dll)
XMLNS for XAML: http://schemas.microsoft.com/winfx/2006/xaml/presentation, http://schemas.microsoft.com/netfx/2007/xaml/presentation

'Declaration
Public Property To As Rotation3D
<object To="Rotation3D"/>- or -<object To="{x:Null Markup Extension}"/>

Property Value

Type: System.Windows.Media.Media3D.Rotation3D
A Rotation3D that represents the animation's ending value.

Identifier field

ToProperty

Metadata properties set to true

None

The following table summarizes how the From, To, and By properties may be used together or separately to determine an animation's target values.

Properties Specified

Resulting Behavior

From

The animation progresses from the value specified by the From property to the base value of the property being animated or to a previous animation's output value, depending on how the previous animation is configured.

From and To

The animation progresses from the value specified by the From property to the value specified by the To property.

From and By

The animation progresses from the value specified by the From property to the value specified by the sum of the From and By properties.

To

The animation progresses from the animated property's base value or a previous animation's output value to the value specified by the To property.

By

The animation progresses from the base value of the property being animated or a previous animation's output value to the sum of that value and the value specified by the By property.

Note   If you set both the To and By properties, the To property takes precedence and the By property is ignored.

To use other interpolation methods or animate between more than two target values, use a Rotation3DAnimationUsingKeyFrames object.

The following example shows how to make a 3D object rotate while it "wobbles" by using Rotation3DAnimation to animate the Rotation property of the RotateTransform3D object applied to the 3D object.

<Page xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
  xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" >
  <DockPanel>
    <Viewbox>
      <Canvas Width="321" Height="201">

        <!-- The Viewport3D provides a rendering surface for 3-D visual content. -->
        <Viewport3D Name="MyAnimatedObject"
          ClipToBounds="True" Width="150" Height="150"
          Canvas.Left="0" Canvas.Top="10">

          <!-- Defines the camera used to view the 3D object. -->
          <Viewport3D.Camera>
            <PerspectiveCamera x:Name="myPerspectiveCamera" Position="0,0,2" LookDirection="0,0,-1" 
             FieldOfView="60" />
          </Viewport3D.Camera>

          <!-- The ModelVisual3D children contain the 3D models -->
          <Viewport3D.Children>

            <!-- Two ModelVisual3D define the lights cast in the scene. Without light, the
                 3D object cannot be seen. Also, the direction of the lights affect shadowing. -->
            <ModelVisual3D>
              <ModelVisual3D.Content>
                <DirectionalLight Color="#FFFFFF" Direction="-0.612372,-0.5,-0.612372" />
              </ModelVisual3D.Content>
            </ModelVisual3D>
            <ModelVisual3D>
              <ModelVisual3D.Content>
                <DirectionalLight Color="#FFFFFF" Direction="0.612372,-0.5,-0.612372" />
              </ModelVisual3D.Content>
            </ModelVisual3D>
            <ModelVisual3D>
              <ModelVisual3D.Content>
                <GeometryModel3D>

                  <!-- The geometry specifes the shape of the 3D plane. In this case, a flat sheet is created. -->
                  <GeometryModel3D.Geometry>
                    <MeshGeometry3D
                     TriangleIndices="0,1,2 3,4,5 "
                     Normals="0,0,1 0,0,1 0,0,1 0,0,1 0,0,1 0,0,1 "
                     TextureCoordinates="0,0 1,0 1,1 1,1 0,1 0,0 "
                     Positions="-0.5,-0.5,0.5 0.5,-0.5,0.5 0.5,0.5,0.5 0.5,0.5,0.5 -0.5,0.5,0.5 -0.5,-0.5,0.5 " />
                  </GeometryModel3D.Geometry>

                  <!-- The material specifies the material applied to the plane. In this case it is a linear gradient.-->
                  <GeometryModel3D.Material>
                    <MaterialGroup>
                      <DiffuseMaterial>
                        <DiffuseMaterial.Brush>
                          <LinearGradientBrush StartPoint="0,0.5" EndPoint="1,0.5">
                            <LinearGradientBrush.GradientStops>
                              <GradientStop Color="Yellow" Offset="0" />
                              <GradientStop Color="Red" Offset="0.25" />
                              <GradientStop Color="Blue" Offset="0.75" />
                              <GradientStop Color="LimeGreen" Offset="1" />
                            </LinearGradientBrush.GradientStops>
                          </LinearGradientBrush>
                        </DiffuseMaterial.Brush>
                      </DiffuseMaterial>
                    </MaterialGroup>
                  </GeometryModel3D.Material>

                  <!-- The Transform specifies how to transform the 3D object. The properties of the
                        Rotation object are animated causing the 3D object to rotate and "wobble" (see Storyboard below).-->
                  <GeometryModel3D.Transform>
                    <RotateTransform3D x:Name="myRotateTransform3D" >
                      <RotateTransform3D.Rotation>
                        <AxisAngleRotation3D Axis="0,3,0" Angle="40" />
                      </RotateTransform3D.Rotation>
                    </RotateTransform3D>
                  </GeometryModel3D.Transform>
                </GeometryModel3D>
              </ModelVisual3D.Content>
            </ModelVisual3D>
          </Viewport3D.Children>

          <!-- Trigger the rotation animation when the 3D object loads. -->
          <Viewport3D.Triggers>
            <EventTrigger RoutedEvent="Viewport3D.Loaded">
              <BeginStoryboard>
                <Storyboard>

                  <!-- This animation animates the Rotation property of the RotateTransform
                       causing the 3D shape to rotate and wobble as the rotation angle and 
                       axis are animated. -->
                  <Rotation3DAnimation
                   Storyboard.TargetName="myRotateTransform3D" 
                   Storyboard.TargetProperty="Rotation" 
                   AutoReverse="True"  RepeatBehavior="Forever">
                    <Rotation3DAnimation.From>
                      <AxisAngleRotation3D Axis="0,3,0" Angle="-60" />
                    </Rotation3DAnimation.From>
                    <Rotation3DAnimation.To>
                      <AxisAngleRotation3D Axis="1,0,1" Angle="60" />
                    </Rotation3DAnimation.To>
                  </Rotation3DAnimation>

                </Storyboard>
              </BeginStoryboard>
            </EventTrigger>
          </Viewport3D.Triggers>
        </Viewport3D>
      </Canvas>
    </Viewbox>
  </DockPanel>
</Page>

More Code

How to: Control an Animation using From, To, and ByA "From/To/By" or "basic animation" creates a transition between two target values (see Animation Overview for an introduction to different types of animations). To set the target values of a basic animation, use its From, To, and By properties. The following table summarizes how the From, To, and By properties may be used together or separately to determine an animation's target values.

.NET Framework

Supported in: 4.5.2, 4.5.1, 4.5, 4, 3.5, 3.0

.NET Framework Client Profile

Supported in: 4, 3.5 SP1

Windows 8.1, Windows Server 2012 R2, Windows 8, Windows Server 2012, Windows 7, Windows Vista SP2, Windows Server 2008 (Server Core Role not supported), Windows Server 2008 R2 (Server Core Role supported with SP1 or later; Itanium not supported)

The .NET Framework does not support all versions of every platform. For a list of the supported versions, see .NET Framework System Requirements.

Was this page helpful?
(1500 characters remaining)
Thank you for your feedback
Show:
© 2014 Microsoft