NumericUpDown Class

Definition

Represents a Windows spin box (also known as an up-down control) that displays numeric values.

public ref class NumericUpDown : System::Windows::Forms::UpDownBase, System::ComponentModel::ISupportInitialize
public class NumericUpDown : System.Windows.Forms.UpDownBase, System.ComponentModel.ISupportInitialize
[System.ComponentModel.DefaultBindingProperty("Value")]
[System.Runtime.InteropServices.ClassInterface(System.Runtime.InteropServices.ClassInterfaceType.AutoDispatch)]
[System.Runtime.InteropServices.ComVisible(true)]
public class NumericUpDown : System.Windows.Forms.UpDownBase, System.ComponentModel.ISupportInitialize
[System.ComponentModel.DefaultBindingProperty("Value")]
public class NumericUpDown : System.Windows.Forms.UpDownBase, System.ComponentModel.ISupportInitialize
type NumericUpDown = class
    inherit UpDownBase
    interface ISupportInitialize
[<System.ComponentModel.DefaultBindingProperty("Value")>]
[<System.Runtime.InteropServices.ClassInterface(System.Runtime.InteropServices.ClassInterfaceType.AutoDispatch)>]
[<System.Runtime.InteropServices.ComVisible(true)>]
type NumericUpDown = class
    inherit UpDownBase
    interface ISupportInitialize
[<System.ComponentModel.DefaultBindingProperty("Value")>]
type NumericUpDown = class
    inherit UpDownBase
    interface ISupportInitialize
Public Class NumericUpDown
Inherits UpDownBase
Implements ISupportInitialize
Inheritance
Attributes
Implements

Examples

The following code example creates and initializes a NumericUpDown control, sets some of its common properties, and allows the user to change some of these properties at run time. This code assumes three CheckBox controls have been placed on a form and handlers for their Click events have been instantiated. The DecimalPlaces, ThousandsSeparator, and Hexadecimal properties are set on the Click event of each check box.

public:
   void InstantiateMyNumericUpDown()
   {
      // Create and initialize a NumericUpDown control.
      numericUpDown1 = gcnew NumericUpDown;
      
      // Dock the control to the top of the form.
      numericUpDown1->Dock = System::Windows::Forms::DockStyle::Top;
      
      // Set the Minimum, Maximum, and initial Value.
      numericUpDown1->Value = 5;
      numericUpDown1->Maximum = 2500;
      numericUpDown1->Minimum = -100;
      
      // Add the NumericUpDown to the Form.
      Controls->Add( numericUpDown1 );
   }

private:
   // Check box to toggle decimal places to be displayed.
   void checkBox1_Click( Object^ sender, EventArgs^ e )
   {
      /* If DecimalPlaces is greater than 0, set them to 0 and round the 
         current Value; otherwise, set DecimalPlaces to 2 and change the 
         Increment to 0.25. */
      if ( numericUpDown1->DecimalPlaces > 0 )
      {
         numericUpDown1->DecimalPlaces = 0;
         numericUpDown1->Value = Decimal::Round( numericUpDown1->Value, 0 );
      }
      else
      {
         numericUpDown1->DecimalPlaces = 2;
         numericUpDown1->Increment = Decimal(0.25);
      }
   }

   // Check box to toggle thousands separators to be displayed.
   void checkBox2_Click( Object^ sender, EventArgs^ e )
   {
      /* If ThousandsSeparator is true, set it to false; 
         otherwise, set it to true. */
      if ( numericUpDown1->ThousandsSeparator )
      {
         numericUpDown1->ThousandsSeparator = false;
      }
      else
      {
         numericUpDown1->ThousandsSeparator = true;
      }
   }

   // Check box to toggle hexadecimal to be displayed.
   void checkBox3_Click( Object^ sender, EventArgs^ e )
   {
      /* If Hexadecimal is true, set it to false; 
         otherwise, set it to true. */
      if ( numericUpDown1->Hexadecimal )
      {
         numericUpDown1->Hexadecimal = false;
      }
      else
      {
         numericUpDown1->Hexadecimal = true;
      }
   }
public void InstantiateMyNumericUpDown()
{
   // Create and initialize a NumericUpDown control.
   numericUpDown1 = new NumericUpDown();

   // Dock the control to the top of the form.
   numericUpDown1.Dock = System.Windows.Forms.DockStyle.Top;

   // Set the Minimum, Maximum, and initial Value.
   numericUpDown1.Value = 5;
   numericUpDown1.Maximum = 2500;
   numericUpDown1.Minimum = -100;
   
   // Add the NumericUpDown to the Form.
   Controls.Add(numericUpDown1);
}

// Check box to toggle decimal places to be displayed.
private void checkBox1_Click(Object sender,
                             EventArgs e)
{
   /* If DecimalPlaces is greater than 0, set them to 0 and round the 
      current Value; otherwise, set DecimalPlaces to 2 and change the 
      Increment to 0.25. */
   if (numericUpDown1.DecimalPlaces > 0)
   {
      numericUpDown1.DecimalPlaces = 0;
      numericUpDown1.Value = Decimal.Round(numericUpDown1.Value, 0);
   }
   else
   {
      numericUpDown1.DecimalPlaces = 2;
      numericUpDown1.Increment = 0.25M;
   }
}

// Check box to toggle thousands separators to be displayed.
private void checkBox2_Click(Object sender,
                             EventArgs e)
{   
   /* If ThousandsSeparator is true, set it to false; 
      otherwise, set it to true. */
   if (numericUpDown1.ThousandsSeparator)
   {
      numericUpDown1.ThousandsSeparator = false;
   }
   else
   {
      numericUpDown1.ThousandsSeparator = true;
   }
}

// Check box to toggle hexadecimal to be displayed.
private void checkBox3_Click(Object sender, 
                             EventArgs e)
{
   /* If Hexadecimal is true, set it to false; 
      otherwise, set it to true. */    
   if (numericUpDown1.Hexadecimal)
   {
      numericUpDown1.Hexadecimal = false;
   }
   else
   {
      numericUpDown1.Hexadecimal = true;
   }
}
Public Sub InstantiateMyNumericUpDown()
    ' Create and initialize a NumericUpDown control.
    numericUpDown1 = New NumericUpDown()
    
    ' Dock the control to the top of the form.
    numericUpDown1.Dock = System.Windows.Forms.DockStyle.Top
    
    ' Set the Minimum, Maximum, and initial Value.
    numericUpDown1.Value = 5
    numericUpDown1.Maximum = 2500
    numericUpDown1.Minimum = - 100
    
    ' Add the NumericUpDown to the Form.
    Controls.Add(numericUpDown1)
End Sub    

' Check box to toggle decimal places to be displayed.
Private Sub checkBox1_Click(sender As Object, e As EventArgs)
    ' If DecimalPlaces is greater than 0, set them to 0 and round the
    ' current Value; otherwise, set DecimalPlaces to 2 and change the
    ' Increment to 0.25. 
    If numericUpDown1.DecimalPlaces > 0 Then
        numericUpDown1.DecimalPlaces = 0
        numericUpDown1.Value = Decimal.Round(numericUpDown1.Value, 0)
    Else
        numericUpDown1.DecimalPlaces = 2
        numericUpDown1.Increment = 0.25D
    End If
End Sub    

' Check box to toggle thousands separators to be displayed.
Private Sub checkBox2_Click(sender As Object, e As EventArgs)
    ' If ThousandsSeparator is true, set it to false;
    ' otherwise, set it to true. 
    If numericUpDown1.ThousandsSeparator Then
        numericUpDown1.ThousandsSeparator = False
    Else
        numericUpDown1.ThousandsSeparator = True
    End If
End Sub    

' Check box to toggle hexadecimal to be displayed.
Private Sub checkBox3_Click(sender As Object, e As EventArgs)
    ' If Hexadecimal is true, set it to false;
    ' otherwise, set it to true. 
    If numericUpDown1.Hexadecimal Then
        numericUpDown1.Hexadecimal = False
    Else
        numericUpDown1.Hexadecimal = True
    End If
End Sub

Remarks

A NumericUpDown control contains a single numeric value that can be incremented or decremented by clicking the up or down buttons of the control. The user can also enter in a value, unless the ReadOnly property is set to true.

The numeric display can be formatted by setting the DecimalPlaces, Hexadecimal, or ThousandsSeparator properties. To display hexadecimal values in the control, set the Hexadecimal property to true. To display a thousands separator in decimal numbers when appropriate, set the ThousandsSeparator property to true. To specify the number of digits displayed after the decimal symbol, set the DecimalPlaces property to the number of decimal places to display.

To specify the allowable range of values for the control, set the Minimum and Maximum properties. Set the Increment value to specify the value to be incremented or decremented to the Value property when the user clicks the up or down arrow buttons. You can increase the speed that the control moves through numbers when the user continuously presses the up or down arrow by setting the Accelerations property.

When the UpButton or DownButton methods are called, either in code or by the click of the up or down buttons, the new value is validated and the control is updated with the new value in the appropriate format. Specifically, if the UserEdit property is set to true, the ParseEditText method is called prior to validating or updating the value. The value is then verified to be between the Minimum and Maximum values, and the UpdateEditText method is called.

Starting with the .NET Framework 4.6, the NumericUpDown control will be resized based on the system DPI setting when the app.config file contains the following entry:

<appSettings>  
  <add key="EnableWindowsFormsHighDpiAutoResizing" value="true" />  
</appSettings>  

Constructors

NumericUpDown()

Initializes a new instance of the NumericUpDown class.

Fields

ScrollStateAutoScrolling

Determines the value of the AutoScroll property.

(Inherited from ScrollableControl)
ScrollStateFullDrag

Determines whether the user has enabled full window drag.

(Inherited from ScrollableControl)
ScrollStateHScrollVisible

Determines whether the value of the HScroll property is set to true.

(Inherited from ScrollableControl)
ScrollStateUserHasScrolled

Determines whether the user had scrolled through the ScrollableControl control.

(Inherited from ScrollableControl)
ScrollStateVScrollVisible

Determines whether the value of the VScroll property is set to true.

(Inherited from ScrollableControl)

Properties

Accelerations

Gets a collection of sorted acceleration objects for the NumericUpDown control.

AccessibilityObject

Gets the AccessibleObject assigned to the control.

(Inherited from Control)
AccessibleDefaultActionDescription

Gets or sets the default action description of the control for use by accessibility client applications.

(Inherited from Control)
AccessibleDescription

Gets or sets the description of the control used by accessibility client applications.

(Inherited from Control)
AccessibleName

Gets or sets the name of the control used by accessibility client applications.

(Inherited from Control)
AccessibleRole

Gets or sets the accessible role of the control.

(Inherited from Control)
ActiveControl

Gets or sets the active control on the container control.

(Inherited from ContainerControl)
AllowDrop

Gets or sets a value indicating whether the control can accept data that the user drags onto it.

(Inherited from Control)
Anchor

Gets or sets the edges of the container to which a control is bound and determines how a control is resized with its parent.

(Inherited from Control)
AutoScaleDimensions

Gets or sets the dimensions that the control was designed to.

(Inherited from ContainerControl)
AutoScaleFactor

Gets the scaling factor between the current and design-time automatic scaling dimensions.

(Inherited from ContainerControl)
AutoScaleMode

Gets or sets the automatic scaling mode of the control.

(Inherited from ContainerControl)
AutoScroll

Gets a value indicating whether the container will allow the user to scroll to any controls placed outside of its visible boundaries.

(Inherited from UpDownBase)
AutoScrollMargin

Gets or sets the size of the auto-scroll margin.

(Inherited from UpDownBase)
AutoScrollMinSize

Gets or sets the minimum size of the auto-scroll area.

(Inherited from UpDownBase)
AutoScrollOffset

Gets or sets where this control is scrolled to in ScrollControlIntoView(Control).

(Inherited from Control)
AutoScrollPosition

Gets or sets the location of the auto-scroll position.

(Inherited from ScrollableControl)
AutoSize

Gets or sets a value indicating whether the control should automatically resize based on its contents.

(Inherited from UpDownBase)
AutoValidate

Gets or sets a value that indicates whether controls in this container will be automatically validated when the focus changes.

(Inherited from ContainerControl)
BackColor

Gets or sets the background color for the text box portion of the spin box (also known as an up-down control).

(Inherited from UpDownBase)
BackgroundImage

Gets or sets the background image for the UpDownBase.

(Inherited from UpDownBase)
BackgroundImageLayout

Gets or sets the layout of the BackgroundImage of the UpDownBase.

(Inherited from UpDownBase)
BindingContext

Gets or sets the BindingContext for the control.

(Inherited from ContainerControl)
BorderStyle

Gets or sets the border style for the spin box (also known as an up-down control).

(Inherited from UpDownBase)
Bottom

Gets the distance, in pixels, between the bottom edge of the control and the top edge of its container's client area.

(Inherited from Control)
Bounds

Gets or sets the size and location of the control including its nonclient elements, in pixels, relative to the parent control.

(Inherited from Control)
CanEnableIme

Gets a value indicating whether the ImeMode property can be set to an active value, to enable IME support.

(Inherited from ContainerControl)
CanFocus

Gets a value indicating whether the control can receive focus.

(Inherited from Control)
CanRaiseEvents

Determines if events can be raised on the control.

(Inherited from Control)
CanSelect

Gets a value indicating whether the control can be selected.

(Inherited from Control)
Capture

Gets or sets a value indicating whether the control has captured the mouse.

(Inherited from Control)
CausesValidation

Gets or sets a value indicating whether the control causes validation to be performed on any controls that require validation when it receives focus.

(Inherited from Control)
ChangingText

Gets or sets a value indicating whether the text property is being changed internally by its parent class.

(Inherited from UpDownBase)
ClientRectangle

Gets the rectangle that represents the client area of the control.

(Inherited from Control)
ClientSize

Gets or sets the height and width of the client area of the control.

(Inherited from Control)
CompanyName

Gets the name of the company or creator of the application containing the control.

(Inherited from Control)
Container

Gets the IContainer that contains the Component.

(Inherited from Component)
ContainsFocus

Gets a value indicating whether the control, or one of its child controls, currently has the input focus.

(Inherited from Control)
ContextMenu

Gets or sets the shortcut menu associated with the spin box (also known as an up-down control).

(Inherited from UpDownBase)
ContextMenuStrip

Gets or sets the shortcut menu for the spin box (also known as an up-down control).

(Inherited from UpDownBase)
Controls

Gets the collection of controls contained within the control.

(Inherited from Control)
Created

Gets a value indicating whether the control has been created.

(Inherited from Control)
CreateParams

Gets the required creation parameters when the control handle is created.

(Inherited from UpDownBase)
CurrentAutoScaleDimensions

Gets the current run-time dimensions of the screen.

(Inherited from ContainerControl)
Cursor

Gets or sets the cursor that is displayed when the mouse pointer is over the control.

(Inherited from Control)
DataBindings

Gets the data bindings for the control.

(Inherited from Control)
DataContext

Gets or sets the data context for the purpose of data binding. This is an ambient property.

(Inherited from Control)
DecimalPlaces

Gets or sets the number of decimal places to display in the spin box (also known as an up-down control). This property doesn't affect the Value property.

DefaultCursor

Gets or sets the default cursor for the control.

(Inherited from Control)
DefaultImeMode

Gets the default Input Method Editor (IME) mode supported by the control.

(Inherited from Control)
DefaultMargin

Gets the space, in pixels, that is specified by default between controls.

(Inherited from Control)
DefaultMaximumSize

Gets the length and height, in pixels, that is specified as the default maximum size of a control.

(Inherited from Control)
DefaultMinimumSize

Gets the length and height, in pixels, that is specified as the default minimum size of a control.

(Inherited from Control)
DefaultPadding

Gets the internal spacing, in pixels, of the contents of a control.

(Inherited from Control)
DefaultSize

Gets the default size of the control.

(Inherited from UpDownBase)
DesignMode

Gets a value that indicates whether the Component is currently in design mode.

(Inherited from Component)
DeviceDpi

Gets the DPI value for the display device where the control is currently being displayed.

(Inherited from Control)
DisplayRectangle

Gets the rectangle that represents the virtual display area of the control.

(Inherited from ScrollableControl)
Disposing

Gets a value indicating whether the base Control class is in the process of disposing.

(Inherited from Control)
Dock

Gets or sets which control borders are docked to its parent control and determines how a control is resized with its parent.

(Inherited from Control)
DockPadding

Gets the dock padding settings for all edges of the UpDownBase control.

(Inherited from UpDownBase)
DoubleBuffered

Gets or sets a value indicating whether this control should redraw its surface using a secondary buffer to reduce or prevent flicker.

(Inherited from Control)
Enabled

Gets or sets a value indicating whether the control can respond to user interaction.

(Inherited from Control)
Events

Gets the list of event handlers that are attached to this Component.

(Inherited from Component)
Focused

Gets a value indicating whether the control has input focus.

(Inherited from UpDownBase)
Font

Gets or sets the font of the text displayed by the control.

(Inherited from Control)
FontHeight

Gets or sets the height of the font of the control.

(Inherited from Control)
ForeColor

Gets or sets the foreground color of the spin box (also known as an up-down control).

(Inherited from UpDownBase)
Handle

Gets the window handle that the control is bound to.

(Inherited from Control)
HasChildren

Gets a value indicating whether the control contains one or more child controls.

(Inherited from Control)
Height

Gets or sets the height of the control.

(Inherited from Control)
Hexadecimal

Gets or sets a value indicating whether the spin box (also known as an up-down control) should display the value it contains in hexadecimal format.

HorizontalScroll

Gets the characteristics associated with the horizontal scroll bar.

(Inherited from ScrollableControl)
HScroll

Gets or sets a value indicating whether the horizontal scroll bar is visible.

(Inherited from ScrollableControl)
ImeMode

Gets or sets the Input Method Editor (IME) mode of the control.

(Inherited from Control)
ImeModeBase

Gets or sets the IME mode of a control.

(Inherited from Control)
Increment

Gets or sets the value to increment or decrement the spin box (also known as an up-down control) when the up or down buttons are clicked.

InterceptArrowKeys

Gets or sets a value indicating whether the user can use the UP ARROW and DOWN ARROW keys to select values.

(Inherited from UpDownBase)
InvokeRequired

Gets a value indicating whether the caller must call an invoke method when making method calls to the control because the caller is on a different thread than the one the control was created on.

(Inherited from Control)
IsAccessible

Gets or sets a value indicating whether the control is visible to accessibility applications.

(Inherited from Control)
IsAncestorSiteInDesignMode

Indicates if one of the Ancestors of this control is sited and that site in DesignMode. This property is read-only.

(Inherited from Control)
IsDisposed

Gets a value indicating whether the control has been disposed of.

(Inherited from Control)
IsHandleCreated

Gets a value indicating whether the control has a handle associated with it.

(Inherited from Control)
IsMirrored

Gets a value indicating whether the control is mirrored.

(Inherited from Control)
LayoutEngine

Gets a cached instance of the control's layout engine.

(Inherited from Control)
Left

Gets or sets the distance, in pixels, between the left edge of the control and the left edge of its container's client area.

(Inherited from Control)
Location

Gets or sets the coordinates of the upper-left corner of the control relative to the upper-left corner of its container.

(Inherited from Control)
Margin

Gets or sets the space between controls.

(Inherited from Control)
Maximum

Gets or sets the maximum value for the spin box (also known as an up-down control).

MaximumSize

Gets or sets the maximum size of the spin box (also known as an up-down control).

(Inherited from UpDownBase)
Minimum

Gets or sets the minimum allowed value for the spin box (also known as an up-down control).

MinimumSize

Gets or sets the minimum size of the spin box (also known as an up-down control).

(Inherited from UpDownBase)
Name

Gets or sets the name of the control.

(Inherited from Control)
Padding

Gets or sets the space between the edges of a NumericUpDown control and its contents.

Padding

Gets or sets padding within the control.

(Inherited from Control)
Parent

Gets or sets the parent container of the control.

(Inherited from Control)
ParentForm

Gets the form that the container control is assigned to.

(Inherited from ContainerControl)
PreferredHeight

Gets the height of the spin box (also known as an up-down control).

(Inherited from UpDownBase)
PreferredSize

Gets the size of a rectangular area into which the control can fit.

(Inherited from Control)
ProductName

Gets the product name of the assembly containing the control.

(Inherited from Control)
ProductVersion

Gets the version of the assembly containing the control.

(Inherited from Control)
ReadOnly

Gets or sets a value indicating whether the text can be changed by the use of the up or down buttons only.

(Inherited from UpDownBase)
RecreatingHandle

Gets a value indicating whether the control is currently re-creating its handle.

(Inherited from Control)
Region

Gets or sets the window region associated with the control.

(Inherited from Control)
RenderRightToLeft
Obsolete.
Obsolete.

This property is now obsolete.

(Inherited from Control)
ResizeRedraw

Gets or sets a value indicating whether the control redraws itself when resized.

(Inherited from Control)
Right

Gets the distance, in pixels, between the right edge of the control and the left edge of its container's client area.

(Inherited from Control)
RightToLeft

Gets or sets a value indicating whether control's elements are aligned to support locales using right-to-left fonts.

(Inherited from Control)
ScaleChildren

Gets a value that determines the scaling of child controls.

(Inherited from Control)
ShowFocusCues

Gets a value indicating whether the control should display focus rectangles.

(Inherited from Control)
ShowKeyboardCues

Gets a value indicating whether the user interface is in the appropriate state to show or hide keyboard accelerators.

(Inherited from Control)
Site

Gets or sets the site of the control.

(Inherited from Control)
Size

Gets or sets the height and width of the control.

(Inherited from Control)
TabIndex

Gets or sets the tab order of the control within its container.

(Inherited from Control)
TabStop

Gets or sets a value indicating whether the user can give the focus to this control using the TAB key.

(Inherited from Control)
Tag

Gets or sets the object that contains data about the control.

(Inherited from Control)
Text

Gets or sets the text to be displayed in the NumericUpDown control.

TextAlign

Gets or sets the alignment of the text in the spin box (also known as an up-down control).

(Inherited from UpDownBase)
ThousandsSeparator

Gets or sets a value indicating whether a thousands separator is displayed in the spin box (also known as an up-down control) when appropriate.

Top

Gets or sets the distance, in pixels, between the top edge of the control and the top edge of its container's client area.

(Inherited from Control)
TopLevelControl

Gets the parent control that is not parented by another Windows Forms control. Typically, this is the outermost Form that the control is contained in.

(Inherited from Control)
UpDownAlign

Gets or sets the alignment of the up and down buttons on the spin box (also known as an up-down control).

(Inherited from UpDownBase)
UserEdit

Gets or sets a value indicating whether a value has been entered by the user.

(Inherited from UpDownBase)
UseWaitCursor

Gets or sets a value indicating whether to use the wait cursor for the current control and all child controls.

(Inherited from Control)
Value

Gets or sets the value assigned to the spin box (also known as an up-down control).

VerticalScroll

Gets the characteristics associated with the vertical scroll bar.

(Inherited from ScrollableControl)
Visible

Gets or sets a value indicating whether the control and all its child controls are displayed.

(Inherited from Control)
VScroll

Gets or sets a value indicating whether the vertical scroll bar is visible.

(Inherited from ScrollableControl)
Width

Gets or sets the width of the control.

(Inherited from Control)
WindowTarget

This property is not relevant for this class.

(Inherited from Control)

Methods

AccessibilityNotifyClients(AccessibleEvents, Int32)

Notifies the accessibility client applications of the specified AccessibleEvents for the specified child control.

(Inherited from Control)
AccessibilityNotifyClients(AccessibleEvents, Int32, Int32)

Notifies the accessibility client applications of the specified AccessibleEvents for the specified child control .

(Inherited from Control)
AdjustFormScrollbars(Boolean)

Adjusts the scroll bars on the container based on the current control positions and the control currently selected.

(Inherited from ContainerControl)
BeginInit()

Begins the initialization of a NumericUpDown control that is used on a form or used by another component. The initialization occurs at run time.

BeginInvoke(Action)

Executes the specified delegate asynchronously on the thread that the control's underlying handle was created on.

(Inherited from Control)
BeginInvoke(Delegate)

Executes the specified delegate asynchronously on the thread that the control's underlying handle was created on.

(Inherited from Control)
BeginInvoke(Delegate, Object[])

Executes the specified delegate asynchronously with the specified arguments, on the thread that the control's underlying handle was created on.

(Inherited from Control)
BringToFront()

Brings the control to the front of the z-order.

(Inherited from Control)
Contains(Control)

Retrieves a value indicating whether the specified control is a child of the control.

(Inherited from Control)
CreateAccessibilityInstance()

Creates a new accessibility object for the control.

CreateAccessibilityInstance() (Inherited from UpDownBase)
CreateControl()

Forces the creation of the visible control, including the creation of the handle and any visible child controls.

(Inherited from Control)
CreateControlsInstance()

Creates a new instance of the control collection for the control.

(Inherited from Control)
CreateGraphics()

Creates the Graphics for the control.

(Inherited from Control)
CreateHandle()

Creates a handle for the control.

(Inherited from Control)
CreateObjRef(Type)

Creates an object that contains all the relevant information required to generate a proxy used to communicate with a remote object.

(Inherited from MarshalByRefObject)
DefWndProc(Message)

Sends the specified message to the default window procedure.

(Inherited from Control)
DestroyHandle()

Destroys the handle associated with the control.

(Inherited from Control)
Dispose()

Releases all resources used by the Component.

(Inherited from Component)
Dispose(Boolean)

Releases the unmanaged resources used by the control and its child controls, and optionally releases the managed resources.

(Inherited from UpDownBase)
DoDragDrop(Object, DragDropEffects)

Begins a drag-and-drop operation.

(Inherited from Control)
DoDragDrop(Object, DragDropEffects, Bitmap, Point, Boolean)

Begins a drag operation.

(Inherited from Control)
DownButton()

Decrements the value of the spin box (also known as an up-down control).

DrawToBitmap(Bitmap, Rectangle)

Supports rendering to the specified bitmap.

(Inherited from Control)
EndInit()

Ends the initialization of a NumericUpDown control that is used on a form or used by another component. The initialization occurs at run time.

EndInvoke(IAsyncResult)

Retrieves the return value of the asynchronous operation represented by the IAsyncResult passed.

(Inherited from Control)
Equals(Object)

Determines whether the specified object is equal to the current object.

(Inherited from Object)
FindForm()

Retrieves the form that the control is on.

(Inherited from Control)
Focus()

Sets input focus to the control.

(Inherited from Control)
GetAccessibilityObjectById(Int32)

Retrieves the specified AccessibleObject.

(Inherited from Control)
GetAutoSizeMode()

Retrieves a value indicating how a control will behave when its AutoSize property is enabled.

(Inherited from Control)
GetChildAtPoint(Point)

Retrieves the child control that is located at the specified coordinates.

(Inherited from Control)
GetChildAtPoint(Point, GetChildAtPointSkip)

Retrieves the child control that is located at the specified coordinates, specifying whether to ignore child controls of a certain type.

(Inherited from Control)
GetContainerControl()

Returns the next ContainerControl up the control's chain of parent controls.

(Inherited from Control)
GetHashCode()

Serves as the default hash function.

(Inherited from Object)
GetLifetimeService()
Obsolete.

Retrieves the current lifetime service object that controls the lifetime policy for this instance.

(Inherited from MarshalByRefObject)
GetNextControl(Control, Boolean)

Retrieves the next control forward or back in the tab order of child controls.

(Inherited from Control)
GetPreferredSize(Size)

Retrieves the size of a rectangular area into which a control can be fitted.

(Inherited from Control)
GetScaledBounds(Rectangle, SizeF, BoundsSpecified)

Retrieves the bounds within which the control is scaled.

(Inherited from Control)
GetScrollState(Int32)

Determines whether the specified flag has been set.

(Inherited from ScrollableControl)
GetService(Type)

Returns an object that represents a service provided by the Component or by its Container.

(Inherited from Component)
GetStyle(ControlStyles)

Retrieves the value of the specified control style bit for the control.

(Inherited from Control)
GetTopLevel()

Determines if the control is a top-level control.

(Inherited from Control)
GetType()

Gets the Type of the current instance.

(Inherited from Object)
Hide()

Conceals the control from the user.

(Inherited from Control)
InitializeLifetimeService()
Obsolete.

Obtains a lifetime service object to control the lifetime policy for this instance.

(Inherited from MarshalByRefObject)
InitLayout()

Called after the control has been added to another container.

(Inherited from Control)
Invalidate()

Invalidates the entire surface of the control and causes the control to be redrawn.

(Inherited from Control)
Invalidate(Boolean)

Invalidates a specific region of the control and causes a paint message to be sent to the control. Optionally, invalidates the child controls assigned to the control.

(Inherited from Control)
Invalidate(Rectangle)

Invalidates the specified region of the control (adds it to the control's update region, which is the area that will be repainted at the next paint operation), and causes a paint message to be sent to the control.

(Inherited from Control)
Invalidate(Rectangle, Boolean)

Invalidates the specified region of the control (adds it to the control's update region, which is the area that will be repainted at the next paint operation), and causes a paint message to be sent to the control. Optionally, invalidates the child controls assigned to the control.

(Inherited from Control)
Invalidate(Region)

Invalidates the specified region of the control (adds it to the control's update region, which is the area that will be repainted at the next paint operation), and causes a paint message to be sent to the control.

(Inherited from Control)
Invalidate(Region, Boolean)

Invalidates the specified region of the control (adds it to the control's update region, which is the area that will be repainted at the next paint operation), and causes a paint message to be sent to the control. Optionally, invalidates the child controls assigned to the control.

(Inherited from Control)
Invoke(Action)

Executes the specified delegate on the thread that owns the control's underlying window handle.

(Inherited from Control)
Invoke(Delegate)

Executes the specified delegate on the thread that owns the control's underlying window handle.

(Inherited from Control)
Invoke(Delegate, Object[])

Executes the specified delegate, on the thread that owns the control's underlying window handle, with the specified list of arguments.

(Inherited from Control)
Invoke<T>(Func<T>)

Executes the specified delegate on the thread that owns the control's underlying window handle.

(Inherited from Control)
InvokeGotFocus(Control, EventArgs)

Raises the GotFocus event for the specified control.

(Inherited from Control)
InvokeLostFocus(Control, EventArgs)

Raises the LostFocus event for the specified control.

(Inherited from Control)
InvokeOnClick(Control, EventArgs)

Raises the Click event for the specified control.

(Inherited from Control)
InvokePaint(Control, PaintEventArgs)

Raises the Paint event for the specified control.

(Inherited from Control)
InvokePaintBackground(Control, PaintEventArgs)

Raises the PaintBackground event for the specified control.

(Inherited from Control)
IsInputChar(Char)

Determines if a character is an input character that the control recognizes.

(Inherited from Control)
IsInputKey(Keys)

Determines whether the specified key is a regular input key or a special key that requires preprocessing.

(Inherited from Control)
LogicalToDeviceUnits(Int32)

Converts a Logical DPI value to its equivalent DeviceUnit DPI value.

(Inherited from Control)
LogicalToDeviceUnits(Size)

Transforms a size from logical to device units by scaling it for the current DPI and rounding down to the nearest integer value for width and height.

(Inherited from Control)
MemberwiseClone()

Creates a shallow copy of the current Object.

(Inherited from Object)
MemberwiseClone(Boolean)

Creates a shallow copy of the current MarshalByRefObject object.

(Inherited from MarshalByRefObject)
NotifyInvalidate(Rectangle)

Raises the Invalidated event with a specified region of the control to invalidate.

(Inherited from Control)
OnAutoSizeChanged(EventArgs)

Raises the AutoSizeChanged event.

(Inherited from Control)
OnAutoValidateChanged(EventArgs)

Raises the AutoValidateChanged event.

(Inherited from ContainerControl)
OnBackColorChanged(EventArgs)

Raises the BackColorChanged event.

(Inherited from Control)
OnBackgroundImageChanged(EventArgs)

Raises the BackgroundImageChanged event.

(Inherited from Control)
OnBackgroundImageLayoutChanged(EventArgs)

Raises the BackgroundImageLayoutChanged event.

(Inherited from Control)
OnBindingContextChanged(EventArgs)

Raises the BindingContextChanged event.

(Inherited from Control)
OnCausesValidationChanged(EventArgs)

Raises the CausesValidationChanged event.

(Inherited from Control)
OnChanged(Object, EventArgs)

When overridden in a derived class, raises the Changed event.

(Inherited from UpDownBase)
OnChangeUICues(UICuesEventArgs)

Raises the ChangeUICues event.

(Inherited from Control)
OnClick(EventArgs)

Raises the Click event.

(Inherited from Control)
OnClientSizeChanged(EventArgs)

Raises the ClientSizeChanged event.

(Inherited from Control)
OnContextMenuChanged(EventArgs)

Raises the ContextMenuChanged event.

(Inherited from Control)
OnContextMenuStripChanged(EventArgs)

Raises the ContextMenuStripChanged event.

(Inherited from Control)
OnControlAdded(ControlEventArgs)

Raises the ControlAdded event.

(Inherited from Control)
OnControlRemoved(ControlEventArgs)

Raises the ControlRemoved event.

(Inherited from Control)
OnCreateControl()

Raises the CreateControl() method.

(Inherited from ContainerControl)
OnCursorChanged(EventArgs)

Raises the CursorChanged event.

(Inherited from Control)
OnDataContextChanged(EventArgs) (Inherited from Control)
OnDockChanged(EventArgs)

Raises the DockChanged event.

(Inherited from Control)
OnDoubleClick(EventArgs)

Raises the DoubleClick event.

(Inherited from Control)
OnDpiChangedAfterParent(EventArgs)

Raises the DpiChangedAfterParent event.

(Inherited from Control)
OnDpiChangedBeforeParent(EventArgs)

Raises the DpiChangedBeforeParent event.

(Inherited from Control)
OnDragDrop(DragEventArgs)

Raises the DragDrop event.

(Inherited from Control)
OnDragEnter(DragEventArgs)

Raises the DragEnter event.

(Inherited from Control)
OnDragLeave(EventArgs)

Raises the DragLeave event.

(Inherited from Control)
OnDragOver(DragEventArgs)

Raises the DragOver event.

(Inherited from Control)
OnEnabledChanged(EventArgs)

Raises the EnabledChanged event.

(Inherited from Control)
OnEnter(EventArgs)

Raises the Enter event.

(Inherited from Control)
OnFontChanged(EventArgs)

Raises the FontChanged event.

(Inherited from UpDownBase)
OnForeColorChanged(EventArgs)

Raises the ForeColorChanged event.

(Inherited from Control)
OnGiveFeedback(GiveFeedbackEventArgs)

Raises the GiveFeedback event.

(Inherited from Control)
OnGotFocus(EventArgs)

Raises the GotFocus event.

(Inherited from Control)
OnHandleCreated(EventArgs)

Raises the HandleCreated event.

(Inherited from UpDownBase)
OnHandleDestroyed(EventArgs)

Raises the HandleDestroyed event.

(Inherited from UpDownBase)
OnHelpRequested(HelpEventArgs)

Raises the HelpRequested event.

(Inherited from Control)
OnImeModeChanged(EventArgs)

Raises the ImeModeChanged event.

(Inherited from Control)
OnInvalidated(InvalidateEventArgs)

Raises the Invalidated event.

(Inherited from Control)
OnKeyDown(KeyEventArgs)

Raises the KeyDown event.

OnKeyDown(KeyEventArgs)

Raises the KeyDown event.

(Inherited from Control)
OnKeyPress(KeyPressEventArgs)

Raises the KeyPress event.

(Inherited from Control)
OnKeyUp(KeyEventArgs)

Raises the KeyUp event.

OnKeyUp(KeyEventArgs)

Raises the KeyUp event.

(Inherited from Control)
OnLayout(LayoutEventArgs)

Raises the Layout event.

(Inherited from UpDownBase)
OnLeave(EventArgs)

Raises the Leave event.

(Inherited from Control)
OnLocationChanged(EventArgs)

Raises the LocationChanged event.

(Inherited from Control)
OnLostFocus(EventArgs)

Raises the LostFocus event.

OnLostFocus(EventArgs)

Raises the LostFocus event.

(Inherited from Control)
OnMarginChanged(EventArgs)

Raises the MarginChanged event.

(Inherited from Control)
OnMouseCaptureChanged(EventArgs)

Raises the MouseCaptureChanged event.

(Inherited from Control)
OnMouseClick(MouseEventArgs)

Raises the MouseClick event.

(Inherited from Control)
OnMouseDoubleClick(MouseEventArgs)

Raises the MouseDoubleClick event.

(Inherited from Control)
OnMouseDown(MouseEventArgs)

Raises the MouseDown event.

(Inherited from UpDownBase)
OnMouseEnter(EventArgs)

Raises the MouseEnter event.

(Inherited from Control)
OnMouseHover(EventArgs)

Raises the MouseHover event.

(Inherited from Control)
OnMouseLeave(EventArgs)

Raises the MouseLeave event.

(Inherited from Control)
OnMouseMove(MouseEventArgs)

Raises the MouseMove event.

(Inherited from Control)
OnMouseUp(MouseEventArgs)

Raises the MouseUp event.

(Inherited from UpDownBase)
OnMouseWheel(MouseEventArgs)

Raises the MouseWheel event.

(Inherited from UpDownBase)
OnMove(EventArgs) (Inherited from ContainerControl)
OnNotifyMessage(Message)

Notifies the control of Windows messages.

(Inherited from Control)
OnPaddingChanged(EventArgs)

Raises the PaddingChanged event.

(Inherited from ScrollableControl)
OnPaint(PaintEventArgs)

Raises the Paint event.

(Inherited from UpDownBase)
OnPaintBackground(PaintEventArgs)

Paints the background of the control.

(Inherited from ScrollableControl)
OnParentBackColorChanged(EventArgs)

Raises the BackColorChanged event when the BackColor property value of the control's container changes.

(Inherited from Control)
OnParentBackgroundImageChanged(EventArgs)

Raises the BackgroundImageChanged event when the BackgroundImage property value of the control's container changes.

(Inherited from Control)
OnParentBindingContextChanged(EventArgs)

Raises the BindingContextChanged event when the BindingContext property value of the control's container changes.

(Inherited from Control)
OnParentChanged(EventArgs)

Raises the ParentChanged event.

(Inherited from ContainerControl)
OnParentCursorChanged(EventArgs)

Raises the CursorChanged event.

(Inherited from Control)
OnParentDataContextChanged(EventArgs) (Inherited from Control)
OnParentEnabledChanged(EventArgs)

Raises the EnabledChanged event when the Enabled property value of the control's container changes.

(Inherited from Control)
OnParentFontChanged(EventArgs)

Raises the FontChanged event when the Font property value of the control's container changes.

(Inherited from Control)
OnParentForeColorChanged(EventArgs)

Raises the ForeColorChanged event when the ForeColor property value of the control's container changes.

(Inherited from Control)
OnParentRightToLeftChanged(EventArgs)

Raises the RightToLeftChanged event when the RightToLeft property value of the control's container changes.

(Inherited from Control)
OnParentVisibleChanged(EventArgs)

Raises the VisibleChanged event when the Visible property value of the control's container changes.

(Inherited from Control)
OnPreviewKeyDown(PreviewKeyDownEventArgs)

Raises the PreviewKeyDown event.

(Inherited from Control)
OnPrint(PaintEventArgs)

Raises the Paint event.

(Inherited from Control)
OnQueryContinueDrag(QueryContinueDragEventArgs)

Raises the QueryContinueDrag event.

(Inherited from Control)
OnRegionChanged(EventArgs)

Raises the RegionChanged event.

(Inherited from Control)
OnResize(EventArgs) (Inherited from ContainerControl)
OnRightToLeftChanged(EventArgs)

Raises the RightToLeftChanged event.

(Inherited from ScrollableControl)
OnScroll(ScrollEventArgs)

Raises the Scroll event.

(Inherited from ScrollableControl)
OnSizeChanged(EventArgs)

Raises the SizeChanged event.

(Inherited from Control)
OnStyleChanged(EventArgs)

Raises the StyleChanged event.

(Inherited from Control)
OnSystemColorsChanged(EventArgs)

Raises the SystemColorsChanged event.

(Inherited from Control)
OnTabIndexChanged(EventArgs)

Raises the TabIndexChanged event.

(Inherited from Control)
OnTabStopChanged(EventArgs)

Raises the TabStopChanged event.

(Inherited from Control)
OnTextBoxKeyDown(Object, KeyEventArgs)

Raises the KeyDown event.

(Inherited from UpDownBase)
OnTextBoxKeyPress(Object, KeyPressEventArgs)

Raises the KeyPress event.

OnTextBoxLostFocus(Object, EventArgs)

Raises the LostFocus event.

(Inherited from UpDownBase)
OnTextBoxResize(Object, EventArgs)

Raises the Resize event.

(Inherited from UpDownBase)
OnTextBoxTextChanged(Object, EventArgs)

Raises the TextChanged event.

(Inherited from UpDownBase)
OnTextChanged(EventArgs)

Raises the TextChanged event.

(Inherited from Control)
OnValidated(EventArgs)

Raises the Validated event.

(Inherited from Control)
OnValidating(CancelEventArgs)

Raises the Validating event.

(Inherited from Control)
OnValueChanged(EventArgs)

Raises the ValueChanged event.

OnVisibleChanged(EventArgs)

Raises the VisibleChanged event.

(Inherited from ScrollableControl)
ParseEditText()

Converts the text displayed in the spin box (also known as an up-down control) to a numeric value and evaluates it.

PerformAutoScale()

Performs scaling of the container control and its children.

(Inherited from ContainerControl)
PerformLayout()

Forces the control to apply layout logic to all its child controls.

(Inherited from Control)
PerformLayout(Control, String)

Forces the control to apply layout logic to all its child controls.

(Inherited from Control)
PointToClient(Point)

Computes the location of the specified screen point into client coordinates.

(Inherited from Control)
PointToScreen(Point)

Computes the location of the specified client point into screen coordinates.

(Inherited from Control)
PreProcessControlMessage(Message)

Preprocesses keyboard or input messages within the message loop before they are dispatched.

(Inherited from Control)
PreProcessMessage(Message)

Preprocesses keyboard or input messages within the message loop before they are dispatched.

(Inherited from Control)
ProcessCmdKey(Message, Keys)

Processes a command key.

(Inherited from ContainerControl)
ProcessDialogChar(Char)

Processes a dialog character.

(Inherited from ContainerControl)
ProcessDialogKey(Keys)

Processes a dialog key.

(Inherited from ContainerControl)
ProcessKeyEventArgs(Message)

Processes a key message and generates the appropriate control events.

(Inherited from Control)
ProcessKeyMessage(Message)

Processes a keyboard message.

(Inherited from Control)
ProcessKeyPreview(Message)

Previews a keyboard message.

(Inherited from Control)
ProcessMnemonic(Char)

Processes a mnemonic character.

(Inherited from ContainerControl)
ProcessTabKey(Boolean)

Selects the next available control and makes it the active control.

(Inherited from ContainerControl)
RaiseDragEvent(Object, DragEventArgs)

Raises the appropriate drag event.

(Inherited from Control)
RaiseKeyEvent(Object, KeyEventArgs)

Raises the appropriate key event.

(Inherited from Control)
RaiseMouseEvent(Object, MouseEventArgs)

Raises the appropriate mouse event.

(Inherited from Control)
RaisePaintEvent(Object, PaintEventArgs)

Raises the appropriate paint event.

(Inherited from Control)
RecreateHandle()

Forces the re-creation of the handle for the control.

(Inherited from Control)
RectangleToClient(Rectangle)

Computes the size and location of the specified screen rectangle in client coordinates.

(Inherited from Control)
RectangleToScreen(Rectangle)

Computes the size and location of the specified client rectangle in screen coordinates.

(Inherited from Control)
Refresh()

Forces the control to invalidate its client area and immediately redraw itself and any child controls.

(Inherited from Control)
RescaleConstantsForDpi(Int32, Int32)

Provides constants for rescaling the control when a DPI change occurs.

(Inherited from UpDownBase)
ResetBackColor()

Resets the BackColor property to its default value.

(Inherited from Control)
ResetBindings()

Causes a control bound to the BindingSource to reread all the items in the list and refresh their displayed values.

(Inherited from Control)
ResetCursor()

Resets the Cursor property to its default value.

(Inherited from Control)
ResetFont()

Resets the Font property to its default value.

(Inherited from Control)
ResetForeColor()

Resets the ForeColor property to its default value.

(Inherited from Control)
ResetImeMode()

Resets the ImeMode property to its default value.

(Inherited from Control)
ResetMouseEventArgs()

Resets the control to handle the MouseLeave event.

(Inherited from Control)
ResetRightToLeft()

Resets the RightToLeft property to its default value.

(Inherited from Control)
ResetText()

Resets the Text property to its default value (Empty).

(Inherited from Control)
ResumeLayout()

Resumes usual layout logic.

(Inherited from Control)
ResumeLayout(Boolean)

Resumes usual layout logic, optionally forcing an immediate layout of pending layout requests.

(Inherited from Control)
RtlTranslateAlignment(ContentAlignment)

Converts the specified ContentAlignment to the appropriate ContentAlignment to support right-to-left text.

(Inherited from Control)
RtlTranslateAlignment(HorizontalAlignment)

Converts the specified HorizontalAlignment to the appropriate HorizontalAlignment to support right-to-left text.

(Inherited from Control)
RtlTranslateAlignment(LeftRightAlignment)

Converts the specified LeftRightAlignment to the appropriate LeftRightAlignment to support right-to-left text.

(Inherited from Control)
RtlTranslateContent(ContentAlignment)

Converts the specified ContentAlignment to the appropriate ContentAlignment to support right-to-left text.

(Inherited from Control)
RtlTranslateHorizontal(HorizontalAlignment)

Converts the specified HorizontalAlignment to the appropriate HorizontalAlignment to support right-to-left text.

(Inherited from Control)
RtlTranslateLeftRight(LeftRightAlignment)

Converts the specified LeftRightAlignment to the appropriate LeftRightAlignment to support right-to-left text.

(Inherited from Control)
Scale(Single)
Obsolete.
Obsolete.

Scales the control and any child controls.

(Inherited from Control)
Scale(Single, Single)
Obsolete.
Obsolete.

Scales the entire control and any child controls.

(Inherited from Control)
Scale(SizeF)

Scales the control and all child controls by the specified scaling factor.

(Inherited from Control)
ScaleBitmapLogicalToDevice(Bitmap)

Scales a logical bitmap value to it's equivalent device unit value when a DPI change occurs.

(Inherited from Control)
ScaleControl(SizeF, BoundsSpecified)

Scales a control's location, size, padding and margin.

(Inherited from ScrollableControl)
ScaleCore(Single, Single)

This method is not relevant for this class.

(Inherited from ScrollableControl)
ScaleMinMaxSize(Single, Single, Boolean)

Scales the size of the container's Min and Max properties with the scale factor provided.

(Inherited from ContainerControl)
ScrollControlIntoView(Control)

Scrolls the specified child control into view on an auto-scroll enabled control.

(Inherited from ScrollableControl)
ScrollToControl(Control)

Calculates the scroll offset to the specified child control.

(Inherited from ScrollableControl)
Select()

Activates the control.

(Inherited from Control)
Select(Boolean, Boolean)

Activates a child control. Optionally specifies the direction in the tab order to select the control from.

(Inherited from ContainerControl)
Select(Int32, Int32)

Selects a range of text in the spin box (also known as an up-down control) specifying the starting position and number of characters to select.

(Inherited from UpDownBase)
SelectNextControl(Control, Boolean, Boolean, Boolean, Boolean)

Activates the next control.

(Inherited from Control)
SendToBack()

Sends the control to the back of the z-order.

(Inherited from Control)
SetAutoScrollMargin(Int32, Int32)

Sets the size of the auto-scroll margins.

(Inherited from ScrollableControl)
SetAutoSizeMode(AutoSizeMode)

Sets a value indicating how a control will behave when its AutoSize property is enabled.

(Inherited from Control)
SetBounds(Int32, Int32, Int32, Int32)

Sets the bounds of the control to the specified location and size.

(Inherited from Control)
SetBounds(Int32, Int32, Int32, Int32, BoundsSpecified)

Sets the specified bounds of the control to the specified location and size.

(Inherited from Control)
SetBoundsCore(Int32, Int32, Int32, Int32, BoundsSpecified)

Performs the work of setting the specified bounds of this control.

(Inherited from UpDownBase)
SetClientSizeCore(Int32, Int32)

Sets the size of the client area of the control.

(Inherited from Control)
SetDisplayRectLocation(Int32, Int32)

Positions the display window to the specified value.

(Inherited from ScrollableControl)
SetScrollState(Int32, Boolean)

Sets the specified scroll state flag.

(Inherited from ScrollableControl)
SetStyle(ControlStyles, Boolean)

Sets a specified ControlStyles flag to either true or false.

(Inherited from Control)
SetTopLevel(Boolean)

Sets the control as the top-level control.

(Inherited from Control)
SetVisibleCore(Boolean)

Sets the control to the specified visible state.

(Inherited from Control)
Show()

Displays the control to the user.

(Inherited from Control)
SizeFromClientSize(Size)

Determines the size of the entire control from the height and width of its client area.

(Inherited from Control)
SuspendLayout()

Temporarily suspends the layout logic for the control.

(Inherited from Control)
ToString()

Returns a string that represents the NumericUpDown control.

UpButton()

Increments the value of the spin box (also known as an up-down control).

Update()

Causes the control to redraw the invalidated regions within its client area.

(Inherited from Control)
UpdateBounds()

Updates the bounds of the control with the current size and location.

(Inherited from Control)
UpdateBounds(Int32, Int32, Int32, Int32)

Updates the bounds of the control with the specified size and location.

(Inherited from Control)
UpdateBounds(Int32, Int32, Int32, Int32, Int32, Int32)

Updates the bounds of the control with the specified size, location, and client size.

(Inherited from Control)
UpdateDefaultButton()

When overridden by a derived class, updates which button is the default button.

(Inherited from ContainerControl)
UpdateEditText()

Displays the current value of the spin box (also known as an up-down control) in the appropriate format.

UpdateStyles()

Forces the assigned styles to be reapplied to the control.

(Inherited from Control)
UpdateZOrder()

Updates the control in its parent's z-order.

(Inherited from Control)
Validate()

Verifies the value of the control losing focus by causing the Validating and Validated events to occur, in that order.

(Inherited from ContainerControl)
Validate(Boolean)

Verifies the value of the control that is losing focus; conditionally dependent on whether automatic validation is turned on.

(Inherited from ContainerControl)
ValidateChildren()

Causes all of the child controls within a control that support validation to validate their data.

(Inherited from ContainerControl)
ValidateChildren(ValidationConstraints)

Causes all of the child controls within a control that support validation to validate their data.

(Inherited from ContainerControl)
ValidateEditText()

Validates and updates the text displayed in the spin box (also known as an up-down control).

WndProc(Message)

Processes Windows messages.

(Inherited from UpDownBase)

Events

AutoSizeChanged

Occurs when the value of the AutoSize property changes.

(Inherited from UpDownBase)
AutoValidateChanged

Occurs when the AutoValidate property changes.

(Inherited from ContainerControl)
BackColorChanged

Occurs when the value of the BackColor property changes.

(Inherited from Control)
BackgroundImageChanged

Occurs when the value of the BackgroundImage property changes.

(Inherited from UpDownBase)
BackgroundImageLayoutChanged

Occurs when the value of the BackgroundImageLayout property changes.

(Inherited from UpDownBase)
BindingContextChanged

Occurs when the value of the BindingContext property changes.

(Inherited from Control)
CausesValidationChanged

Occurs when the value of the CausesValidation property changes.

(Inherited from Control)
ChangeUICues

Occurs when the focus or keyboard user interface (UI) cues change.

(Inherited from Control)
Click

Occurs when the control is clicked.

(Inherited from Control)
ClientSizeChanged

Occurs when the value of the ClientSize property changes.

(Inherited from Control)
ContextMenuChanged

Occurs when the value of the ContextMenu property changes.

(Inherited from Control)
ContextMenuStripChanged

Occurs when the value of the ContextMenuStrip property changes.

(Inherited from Control)
ControlAdded

Occurs when a new control is added to the Control.ControlCollection.

(Inherited from Control)
ControlRemoved

Occurs when a control is removed from the Control.ControlCollection.

(Inherited from Control)
CursorChanged

Occurs when the value of the Cursor property changes.

(Inherited from Control)
DataContextChanged

Occurs when the value of the DataContext property changes.

(Inherited from Control)
Disposed

Occurs when the component is disposed by a call to the Dispose() method.

(Inherited from Component)
DockChanged

Occurs when the value of the Dock property changes.

(Inherited from Control)
DoubleClick

Occurs when the control is double-clicked.

(Inherited from Control)
DpiChangedAfterParent

Occurs when the DPI setting for a control is changed programmatically after the DPI of its parent control or form has changed.

(Inherited from Control)
DpiChangedBeforeParent

Occurs when the DPI setting for a control is changed programmatically before a DPI change event for its parent control or form has occurred.

(Inherited from Control)
DragDrop

Occurs when a drag-and-drop operation is completed.

(Inherited from Control)
DragEnter

Occurs when an object is dragged into the control's bounds.

(Inherited from Control)
DragLeave

Occurs when an object is dragged out of the control's bounds.

(Inherited from Control)
DragOver

Occurs when an object is dragged over the control's bounds.

(Inherited from Control)
EnabledChanged

Occurs when the Enabled property value has changed.

(Inherited from Control)
Enter

Occurs when the control is entered.

(Inherited from Control)
FontChanged

Occurs when the Font property value changes.

(Inherited from Control)
ForeColorChanged

Occurs when the ForeColor property value changes.

(Inherited from Control)
GiveFeedback

Occurs during a drag operation.

(Inherited from Control)
GotFocus

Occurs when the control receives focus.

(Inherited from Control)
HandleCreated

Occurs when a handle is created for the control.

(Inherited from Control)
HandleDestroyed

Occurs when the control's handle is in the process of being destroyed.

(Inherited from Control)
HelpRequested

Occurs when the user requests help for a control.

(Inherited from Control)
ImeModeChanged

Occurs when the ImeMode property has changed.

(Inherited from Control)
Invalidated

Occurs when a control's display requires redrawing.

(Inherited from Control)
KeyDown

Occurs when a key is pressed while the control has focus.

(Inherited from Control)
KeyPress

Occurs when a character. space or backspace key is pressed while the control has focus.

(Inherited from Control)
KeyUp

Occurs when a key is released while the control has focus.

(Inherited from Control)
Layout

Occurs when a control should reposition its child controls.

(Inherited from Control)
Leave

Occurs when the input focus leaves the control.

(Inherited from Control)
LocationChanged

Occurs when the Location property value has changed.

(Inherited from Control)
LostFocus

Occurs when the control loses focus.

(Inherited from Control)
MarginChanged

Occurs when the control's margin changes.

(Inherited from Control)
MouseCaptureChanged

Occurs when the control loses mouse capture.

(Inherited from Control)
MouseClick

Occurs when the control is clicked by the mouse.

(Inherited from Control)
MouseDoubleClick

Occurs when the control is double clicked by the mouse.

(Inherited from Control)
MouseDown

Occurs when the mouse pointer is over the control and a mouse button is pressed.

(Inherited from Control)
MouseEnter

Occurs when the mouse pointer enters the UpDownBase control.

(Inherited from UpDownBase)
MouseHover

Occurs when the mouse pointer rests on the UpDownBase control.

(Inherited from UpDownBase)
MouseLeave

Occurs when the mouse pointer leaves the UpDownBase control.

(Inherited from UpDownBase)
MouseMove

Occurs when the user moves the mouse pointer over the UpDownBase control.

(Inherited from UpDownBase)
MouseUp

Occurs when the mouse pointer is over the control and a mouse button is released.

(Inherited from Control)
MouseWheel

Occurs when the mouse wheel moves while the control has focus.

(Inherited from Control)
Move

Occurs when the control is moved.

(Inherited from Control)
PaddingChanged

Occurs when the value of the Padding property changes.

PaddingChanged

Occurs when the control's padding changes.

(Inherited from Control)
Paint

Occurs when the control is redrawn.

(Inherited from Control)
ParentChanged

Occurs when the Parent property value changes.

(Inherited from Control)
PreviewKeyDown

Occurs before the KeyDown event when a key is pressed while focus is on this control.

(Inherited from Control)
QueryAccessibilityHelp

Occurs when AccessibleObject is providing help to accessibility applications.

(Inherited from Control)
QueryContinueDrag

Occurs during a drag-and-drop operation and enables the drag source to determine whether the drag-and-drop operation should be canceled.

(Inherited from Control)
RegionChanged

Occurs when the value of the Region property changes.

(Inherited from Control)
Resize

Occurs when the control is resized.

(Inherited from Control)
RightToLeftChanged

Occurs when the RightToLeft property value changes.

(Inherited from Control)
Scroll

Occurs when the user or code scrolls through the client area.

(Inherited from ScrollableControl)
SizeChanged

Occurs when the Size property value changes.

(Inherited from Control)
StyleChanged

Occurs when the control style changes.

(Inherited from Control)
SystemColorsChanged

Occurs when the system colors change.

(Inherited from Control)
TabIndexChanged

Occurs when the TabIndex property value changes.

(Inherited from Control)
TabStopChanged

Occurs when the TabStop property value changes.

(Inherited from Control)
TextChanged

Occurs when the value of the Text property changes.

Validated

Occurs when the control is finished validating.

(Inherited from Control)
Validating

Occurs when the control is validating.

(Inherited from Control)
ValueChanged

Occurs when the Value property has been changed in some way.

VisibleChanged

Occurs when the Visible property value changes.

(Inherited from Control)

Explicit Interface Implementations

IContainerControl.ActivateControl(Control)

Activates the specified control.

(Inherited from ContainerControl)
IDropTarget.OnDragDrop(DragEventArgs)

Raises the DragDrop event.

(Inherited from Control)
IDropTarget.OnDragEnter(DragEventArgs)

Raises the DragEnter event.

(Inherited from Control)
IDropTarget.OnDragLeave(EventArgs)

Raises the DragLeave event.

(Inherited from Control)
IDropTarget.OnDragOver(DragEventArgs)

Raises the DragOver event.

(Inherited from Control)

Applies to

See also