Home Library Learn Samples Downloads Support Community Forums
MSDN Library
Windows Desktop App Development
Additional Resources
Windows 2000 Technical Articles
Windows 2000 Resource Kit
Error and Event Messages
Windows 2000 Error and Event Messages Help
Kernel
System Resources
A cross-encrypted password is necessary to change a user password. ...
A cross-encrypted password is necessary to change this user password. ...
A device attached to the system is not functioning. ...
A dynamic link library (DLL) initialization routine failed. ...
A floating-point operation at the RPC server caused a division by zero. ...
A floating-point overflow occurred at the RPC server. ...
A floating-point underflow occurred at the RPC server. ...
A lock request was not outstanding for the supplied cancel region. ...
A logon request contained an invalid logon type value. ...
A network adapter hardware error occurred. ...
A null context handle was passed from the client to the host during a remote procedure call. ...
A null reference pointer was passed to the stub. ...
A remote procedure call (RPC) protocol error occurred. ...
A required privilege is not held by the client. ...
A security descriptor is not in the right format (absolute or self-relative). ...
A signal is already pending. ...
A stop control has been sent to a service which other running services are dependent on. ...
A tape access reached a filemark. ...
A tape access reached the end of a set of files. ...
A thread could not be created for the service. ...
A write fault occurred on the network. ...
Access is denied. ...
Access to the extended attribute was denied. ...
After starting, the service hung in a start-pending state. ...
All handles to windows in a multiple-window position structure must have the same parent. ...
All pipe instances are busy. ...
An addressing error occurred in the RPC server. ...
An attempt has been made to operate on an impersonation token by a thread ...
An attempt was made to move the file pointer before the beginning of the file. ...
An attempt was made to reference a token that does not exist. ...
An attempt was made to remember a device that had previously been remembered. ...
An exception occurred in the service when handling the control request. ...
An extended error has occurred. ...
An I/O operation initiated by the Registry failed unrecoverably. The Regis...
An instance of the service is already running. ...
An internal error occurred in a remote procedure call (RPC). ...
Arithmetic result exceeded 32 bits. ...
Attempt to access invalid address. ...
Attempt to release mutex not owned by caller. ...
Attempt to use a file handle to an open disk partition for an operation other than raw disk I/O. ...
Beginning of tape or partition was encountered. ...
Cannot complete this function. ...
Cannot create a file when that file already exists. ...
Cannot create a stable subkey under a volatile parent key. ...
Cannot create a top-level child window. ...
Cannot create another system semaphore. ...
Cannot create another thread. ...
Cannot destroy object created by another thread. ...
Cannot enumerate a non-container. ...
Cannot find window class. ...
Cannot open an anonymous level security token. ...
Cannot perform this operation on built-in accounts. ...
Cannot perform this operation on this built-in special group. ...
Cannot process a message from a window that is not a multiple document interface (MDI) window. ...
Cannot request exclusive semaphores at interrupt time. ...
Cannot run number in Windows 2000 mode....
Cannot set non-local hook without a module handle. ...
Cannot show or remove the window in the way specified. ...
Cannot start a new logon session with an ID that is already in use. ...
Can't nest calls to LoadModule. ...
Child windows cannot have menus. ...
Circular service dependency was specified. ...
Class already exists. ...
Class does not exist. ...
Class still has open windows. ...
Control ID not found. ...
Data error (cyclic redundancy check) ...
DosMuxSemWait did not execute; too many semaphores are already set. ...
During a logon attempt, the user's security context accumulated too many security IDs. ...
Either a required impersonation level was not provided, or the provided impersonation level is invalid. ...
Either the specified user account is already a member of the specified gro...
Error performing inpage operation. ...
Generic access types were contained in an access mask which should already...
Height must be less than 256. ...
Hot key is already registered. ...
Hot key is not registered. ...
Illegal operation attempted on a Registry key which has been marked for deletion. ...
Indicates an ACL contains no inheritable components ...
Invalid accelerator table handle. ...
Invalid access to memory location. ...
Invalid cursor handle. ...
Invalid device context (DC) handle. ...
Invalid GW_* command. ...
Invalid handle to a multiple-window position structure. ...
Invalid hook handle. ...
Invalid hook procedure type. ...
Invalid icon handle. ...
Invalid menu handle. ...
Invalid message box style. ...
Invalid message for a combo box because it does not have an edit control. ...
Invalid message for single-selection listbox. ...
Invalid system-wide (SPI_*) parameter. ...
Invalid thread identifier. ...
Invalid window handle. ...
Invalid window, belongs to other thread. ...
LB_SETCOUNT sent to non-lazy listbox. ...
Logon failure: account currently disabled. ...
Logon failure: account logon time restriction violation. ...
Logon failure: the specified account password has expired. ...
Logon failure: the user has not been granted the requested logon type at this computer. ...
Logon failure: the user has not been granted the requested logon type at this computer. ...
Logon failure: unknown user name or bad password. ...
Logon failure: user account restriction. ...
Logon failure: user not allowed to log on to this computer. ...
Media in drive may have changed. ...
Mismatch between the floppy disk sector ID field and the floppy disk controller track address. ...
More data is available. ...
Network access is denied. ...
No encryption key is available. A well-known encryption key was returned. ...
No endpoint was found. ...
No ID address mark was found on the floppy disk. ...
No interfaces have been exported. ...
No mapping between account names and security IDs was done. ...
No more data is available. ...
No more data is on the tape. ...
No more local user identifiers (LUIDs) are available. ...
No more memory is available for security information updates. ...
No more threads can be created in the system. ...
No network address is available to use to construct a universal unique identifier (UUID). ...
No network provider accepted the given network path. ...
No process is on the other end of the pipe. ...
No protocol sequences have been registered. ...
No security context is available to allow impersonation. ...
No system quota limits are specifically set for this account. ...
Not all privileges referenced are assigned to the caller. ...
Not enough resources are available to process this command. ...
Not enough resources are available to complete this operation. ...
Not enough storage is available to complete this operation. ...
Not enough storage is available to process this command. ...
Overlapped I/O event is not in a signalled state. ...
Overlapped I/O operation is in progress. ...
Physical end of tape encountered. ...
Popup menu already active. ...
Recursion too deep, stack overflowed. ...
Scroll bar range cannot be greater than 0x7FFF. ...
Some mapping between account names and security IDs was not done. ...
Space to store the file waiting to be printed is not available on the server. ...
Storage to process this request is not available. ...
System could not allocate the required space in a Registry log. ...
Tape could not be partitioned. ...
The access control list (ACL) structure is invalid. ...
The account name is invalid or does not exist. ...
The account used is an server trust account. Use your global user account ...
The address for the thread ID is not correct. ...
The argument string passed to DosExecPgm is not correct. ...
The array bounds are invalid. ...
The authentication level is unknown. ...
The authentication service is unknown. ...
The authentication type is unknown. ...
The authorization service is unknown. ...
The binding does not contain an entry name. ...
The binding does not contain any authentication information. ...
The binding handle is invalid. ...
The binding handle is not the correct type. ...
The binding handles passed to a remote procedure call do not match. ...
The byte count is too small. ...
The configuration registry database is corrupt. ...
The configuration registry key is invalid. ...
The context handle changed during a remote procedure call. ...
The Copy API cannot be used. ...
The credentials supplied conflict with an existing set of credentials. ...
The database specified does not exist. ...
The dependency service does not exist or has been marked for deletion. ...
The dependency service or group failed to start. ...
The device is in use by an active process and cannot be disconnected. ...
The device is not currently connected but it is a remembered connection. ...
The directory cannot be removed. ...
The directory is not a subdirectory of the root directory. ...
The directory is not empty. ...
The directory name is invalid. ...
The directory or file cannot be created. ...
The disk is in use or locked by another process. ...
The disk media is not recognized. It may not be formatted. ...
The domain was in the wrong state to perform the security operation. ...
The DosMuxSemWait list is not correct. ...
The drive cannot find the sector requested. ...
The drive cannot locate a specific area or track on the disk. ...
The endpoint cannot be created. ...
The endpoint format is invalid. ...
The endpoint is a duplicate. ...
The endpoint mapper database could not be created. ...
The entry already exists. ...
The entry name is incomplete. ...
The enumeration value is out of range. ...
The event log file is corrupt. ...
The exclusive semaphore is owned by another process. ...
The extended attribute file on the mounted file system is corrupt. ...
The extended attribute table file is full. ...
The extended attributes are inconsistent. ...
The extended attributes did not fit in the buffer. ...
The file name is too long. ...
The file pointer cannot be set on the specified device or file. ...
The file system does not support atomic changes to the lock type. ...
The filename or extension is too long. ...
The filename, directory name, or volume label syntax is incorrect. ...
The flag passed is not correct. ...
The floppy disk controller reported an error that is not recognized by the floppy disk driver. ...
The floppy disk controller returned inconsistent results in its registers. ...
The format of the specified computer name is invalid. ...
The format of the specified domain name is invalid. ...
The format of the specified event name is invalid. ...
The format of the specified group name is invalid. ...
The format of the specified message destination is invalid. ...
The format of the specified message name is invalid. ...
The format of the specified network name is invalid. ...
The format of the specified password is invalid. ...
The format of the specified service name is invalid. ...
The format of the specified share name is invalid. ...
The global filename characters, * or ?, are entered incorrectly or too man...
The group may not be disabled. ...
The hook procedure is not installed. ...
The I/O operation has been aborted because of either a thread exit or an application request. ...
The inherited access control list (ACL) or access control entry (ACE) could not be built. ...
The interface is unknown. ...
The interface was not found. ...
The journal hook procedure is already installed. ...
The last remaining administration account cannot be disabled or deleted. ...
The length of a secret exceeds the maximum length allowed. ...
The list of RPC servers available for the binding of auto handles has been exhausted. ...
The listbox identifier was not found. ...
The local device name is already in use. ...
The local security authority database contains an internal inconsistency. ...
The logon session ID is already in use. ...
The manager type is unknown. ...
The maximum number of calls is too small. ...
The maximum number of secrets that may be stored in a single system has been exceeded. ...
The media is write protected. ...
The mounted file system does not support extended attributes. ...
The name limit for the local computer network adapter card was exceeded. ...
The name or security ID (SID) of the domain specified is inconsistent with...
The name syntax is invalid. ...
The name syntax is not supported. ...
The network BIOS command limit has been reached. ...
The network is not present or not started. ...
The network logon failed. ...
The network path was not found. ...
The network request is not supported. ...
The network resource type is not correct. ...
The NT password is too complex to be converted to a LAN Manager password. ...
The number of specified semaphore events for DosMuxSemWait is not correct. ...
The object universal unique identifier (UUID) has already been registered. ...
The object universal unique identifier (UUID) was not found. ...
The operating system cannot run number ....
The operating system cannot run this application program. ...
The operating system is not presently configured to run this application. ...
The path specified cannot be used at this time. ...
The path specified is being used in a substitute. ...
The physical end of the tape has been reached. ...
The pipe has been ended. ...
The pipe is being closed. ...
The pipe state is invalid. ...
The pixel format is invalid. ...
The print processor is unknown. ...
The printer already exists. ...
The printer command is invalid. ...
The printer driver is unknown. ...
The printer is out of paper. ...
The printer name is invalid. ...
The procedure number is out of range. ...
The process cannot access the file because another process has locked a portion of the file. ...
The process cannot access the file because it is being used by another process. ...
The process terminated unexpectedly. ...
The recipient process has refused the signal. ...
The redirector is in use and cannot be unloaded. ...
The Registry is corrupt. The structure of one of the files that contains R...
The remote adapter is not compatible. ...
The remote computer is not available. ...
The remote procedure call failed and did not execute. ...
The remote procedure call failed. ...
The remote server has been paused or is in the process of being started. ...
The request could not be performed because of an I/O device error. ...
The requested action is restricted for use by logon processes only. The c...
The requested control is not valid for this service ...
The requested operation cannot be performed in full-screen mode. ...
The requested operation is not supported. ...
The revision level is unknown. ...
The RPC protocol sequence is invalid. ...
The RPC protocol sequence is not supported. ...
The RPC protocol sequence was not found. ...
The RPC server attempted an integer division by zero. ...
The RPC server is already listening. ...
The RPC server is not listening. ...
The RPC server is too busy to complete this operation. ...
The RPC server is unavailable. ...
The SAM database on the Windows 2000 Server does not have a computer account...
The security account database contains an internal inconsistency. ...
The security account manager (SAM) or local security authority (LSA) serve...
The security context is invalid. ...
The security descriptor structure is invalid. ...
The security ID structure is invalid. ...
The semaphore cannot be set again. ...
The semaphore is set and cannot be closed. ...
The server endpoint cannot perform the operation. ...
The server is in use and cannot be unloaded. ...
The service cannot accept control messages at this time. ...
The service database is locked. ...
The service did not respond to the start or control request in a timely fashion. ...
The service did not start due to a logon failure. ...
The service has not been started. ...
The service has returned a service-specific error code. ...
The service process could not connect to the service controller. ...
The session was cancelled. ...
The signal handler cannot be set. ...
The specified account name is already a member of the local group. ...
The specified account name is not a member of the local group. ...
The specified attributes are invalid, or incompatible with the attributes for the group as a whole. ...
The specified datatype is invalid. ...
The specified device name is invalid. ...
The specified disk or diskette cannot be accessed. ...
The specified domain already exists. ...
The specified domain did not exist. ...
The specified driver is invalid. ...
The specified extended attribute handle is invalid. ...
The specified extended attribute name was invalid. ...
The specified group already exists. ...
The specified group does not exist. ...
The specified local group already exists. ...
The specified local group does not exist. ...
The specified module could not be found. ...
The specified network name is no longer available. ...
The specified network password is not correct. ...
The specified network provider name is invalid. ...
The specified network resource or device is no longer available. ...
The specified port is unknown. ...
The specified printer driver is already installed. ...
The specified printer driver is currently in use. ...
The specified printer or disk device has been paused. ...
The specified priority is invalid. ...
The specified procedure could not be found. ...
The specified separator file is invalid. ...
The specified server cannot perform the requested operation. ...
The specified service already exists. ...
The specified service database lock is invalid. ...
The specified service does not exist as an installed service. ...
The specified service has been marked for deletion. ...
The specified service is disabled and cannot be started. ...
The specified system semaphore name was not found. ...
The specified user account is not a member of the specified group account. ...
The specified user already exists. ...
The specified user does not exist. ...
The specified username is invalid. ...
The string binding is invalid. ...
The string universal unique identifier (UUID) is invalid. ...
The stub is unable to get the remote procedure call handle. ...
The stub received bad data. ...
The supplied user buffer is not valid for the requested operation. ...
The system cannot find message for message number 0x name in message file for name ....
The system cannot find the device specified. ...
The system cannot find the drive specified. ...
The system cannot find the file specified. ...
The system cannot find the path specified. ...
The system cannot move the file to a different disk drive. ...
The system cannot open the device or file specified. ...
The system cannot open the file. ...
The system cannot perform a JOIN or SUBST at this time. ...
The system cannot read from the specified device. ...
The system cannot start another process at this time. ...
The system cannot write to the specified device. ...
The system detected a segment number that was not correct. ...
The system has attempted to load or restore a file into the Registry, but t...
The system is currently running with the last-known-good configuration. ...
The tag is invalid. ...
The timeout value is invalid. ...
The token is already in use as a primary token. ...
The trust relationship between the primary domain and the trusted domain failed. ...
The trust relationship between this workstation and the primary domain failed. ...
The type of the token is inappropriate for its attempted use. ...
The type universal unique identifier (UUID) has already been registered. ...
The universal unique identifier (UUID) type is not supported. ...
The user cannot be removed from a group because the group is currently the user's primary group. ...
The user's account has expired. ...
The validation information class requested was invalid. ...
The version option is invalid. ...
The volume does not contain a recognized file system. Please make sure tha...
The volume for a file has been externally altered such that the opened file is no longer valid. ...
The window cannot act on the sent message. ...
The window does not have a system menu. ...
The window does not have scroll bars. ...
The window is not a child window. ...
The window is not a combo box. ...
The window is not a valid dialog window. ...
The window style or class attribute is invalid for this operation. ...
The workstation does not have a trust secret. ...
There are currently no logon servers available to service the logon request. ...
There are no bindings. ...
There are no child processes to wait for. ...
There are no more bindings. ...
There are no more endpoints available from the endpoint mapper. ...
There are no more members. ...
There are no protocol sequences. ...
There is a process on other end of the pipe. ...
There is not a remote procedure call active in this thread. ...
There is not enough space on the disk. ...
There is nothing to unexport. ...
This hook procedure can only be set globally. ...
This list box does not support tab stops. ...
This network connection does not exist. ...
This network connection has files open or requests pending. ...
This operation is only allowed for the Primary Domain Controller of the domain. ...
This security ID may not be assigned as the owner of this object. ...
This security ID may not be assigned as the primary group of an object. ...
Thread does not have a clipboard open. ...
Too many dynamic link modules are attached to this program or dynamic link module. ...
Too many files opened for sharing. ...
Too many posts were made to a semaphore. ...
Too many security IDs have been specified. ...
Unable to complete the requested operation because of either a catastrophi...
Unable to impersonate via a named pipe until data has been read from that pipe. ...
Unable to lock the media eject mechanism. ...
Unable to open a device that was sharing an interrupt request (IRQ) with o...
Unable to open the network connection profile. ...
Unable to perform a security operation on an object which has no associated security. ...
Unable to unload the media. ...
Unable to update the password because a password update rule has been violated. ...
Unable to update the password. The value provided as the current password is incorrect. ...
Unable to update the password. The value provided for the new password co...
Using private DIALOG window words. ...
Waiting for a process to open the other end of the pipe. ...
When accessing a new tape of a multivolume partition, the current blocksize is incorrect. ...
While accessing the hard disk, a disk controller reset was needed, but even that failed. ...
While accessing the hard disk, a disk operation failed even after retries. ...
While accessing the hard disk, a recalibrate operation failed, even after retries. ...
Your file waiting to be printed was deleted. ...
Expand Minimize
0 out of 1 rated this helpful - Rate this topic

Error Message:

The specified account name is already a member of the local group.

User Action:

Contact the supplier of the running application.

Did you find this helpful?
(1500 characters remaining)
© 2013 Microsoft. All rights reserved.
|
Site Feedback
© 2013 Microsoft. All rights reserved.