Share via


MCI_PAUSE

The MCI_PAUSE command pauses the current action. CD audio, digital-video, MIDI sequencer, VCR, videodisc, and waveform-audio devices recognize this command.

To send this command, call the mciSendCommand function with the following parameters.

MCIERROR mciSendCommand(
  MCIDEVICEID wDeviceID, 
  MCI_PAUSE, 
  DWORD dwFlags, 
  (DWORD) (LPMCI_GENERIC_PARMS) lpPause
);

Parameters

wDeviceID

Device identifier of the MCI device that is to receive the command message.

dwFlags

MCI_NOTIFY, MCI_WAIT, or, for digital-video and VCR devices, MCI_TEST. For information about these flags, see The Wait, Notify, and Test Flags.

lpPause

Pointer to an MCI_GENERIC_PARMS structure. (Devices with extended command sets might replace this structure with a device-specific structure.)

Return Values

Returns zero if successful or an error otherwise.

Remarks

The difference between the MCI_STOP and MCI_PAUSE commands depends on the device. If possible, MCI_PAUSE suspends device operation but leaves the device ready to resume play immediately. With the MCICDA, MCISEQ, and MCIPIONR drivers, the MCI_PAUSE command works the same as the MCI_STOP command.

For digital-video devices, the lpPause parameter points to an MCI_DGV_PAUSE_PARMS structure.

Requirements

**  Windows NT/2000/XP:** Included in Windows NT 3.1 and later.
**  Windows 95/98/Me:** Included in Windows 95 and later.
**  Header:** Declared in Mmsystem.h; include Windows.h.

See Also

MCI, MCI Commands, MCI_DGV_PAUSE_PARMS, MCI_GENERIC_PARMS, MCI_STOP