Storage Management API Common Return Codes
Standard CIM Return Codes
| Error Value | Description |
|---|---|
| 0 | Success |
| 1 | Not Supported |
| 2 | Unspecified Error |
| 3 | Timeout |
| 4 | Failed |
| 5 | Invalid Parameter |
| 6 | In Use / Disk is in use |
Extended CIM Return Codes
| Error Value | Description |
|---|---|
| 4096 | Method Parameters Checked - Job Started |
| 4097 | Size not supported |
| 4098 | Timeout not supported |
| 4099 | The device is busy |
Storage Management API Return Codes
Common Errors 40000 - 40999
| Error Value | Description |
|---|---|
| 40000 | Not enough available capacity |
| 40001 | Access denied |
| 40002 | There are not enough resources to complete the operation. |
| 40003 | Cache out of date |
| 40004 | An unexpected I/O error has occurred |
| 40005 | You must specify a size by using either the Size or the UseMaximumSize parameter. You can specify only one of these parameters at a time. |
| 40006 | The object or object type requested does not exist in cache. |
Disk Errors 41000 - 41999
| Error Value | Description |
|---|---|
| 41000 | The disk has not been initialized. |
| 41001 | The disk has already been initialized. |
| 41002 | The disk is read only. |
| 41003 | The disk is offline. |
| 41004 | The disk's partition limit has been reached. |
| 41005 | The specified partition alignment is not valid. It must be a multiple of the disk's sector size. |
| 41006 | A parameter is not valid for this type of partition. |
| 41007 | Cannot clear with OEM partitions present. To clear OEM partitions, use the RemoveOEM flag. |
| 41008 | Cannot clear with data partitions present. To clear data partitions, use the RemoveData flag. |
| 41009 | Operation not supported on a critical disk. |
| 41010 | The specified partition type is not valid. |
| 41011 | Only the first 2 TB are usable on MBR disks. |
| 41012 | The specified offset is not valid. |
| 41013 | Cannot convert the style of a disk with data or other known partitions on it. |
| 41014 | The disk is not large enough to support a GPT partition style. |
Partition Errors 42000 - 42999
| Error Value | Description |
|---|---|
| 42000 | The partition was deleted, although its access paths were not. |
| 42001 | The extended partition still contains other partitions. |
| 42002 | The requested access path is already in use. |
| 42004 | Cannot assign access paths to hidden partitions. |
| 42005 | Cannot remove a volume GUID path. |
| 42006 | Cannot remove the drive letter of a boot or paging file partition. |
| 42007 | The access path is not valid. |
| 42008 | Cannot shrink a partition containing a volume with errors. |
| 42009 | Cannot resize a partition containing an unknown file system. |
| 42010 | The operation is not allowed on a system or critical partition. |
| 42011 | This operation is only supported on data partitions. |
| 42012 | Cannot assign multiple drive letters to a partition. |
| 42013 | Cannot assign drive letter to this type of partition. |
Volume Errors 43000 - 43999
| Error Value | Description |
|---|---|
| 43000 | The specified cluster size is invalid |
| 43001 | The specified file system is not supported |
| 43002 | The volume cannot be quick formatted |
| 43003 | The number of clusters exceeds 32 bits |
| 43004 | The specified UDF version is not supported |
| 43005 | The cluster size must be a multiple of the disk's physical sector size |
| 43006 | Cannot perform the requested operation when the drive is read only |
| 43007 | The repair failed |
| 43008 | The scan failed |
| 43009 | A snapshot error occured while scanning this drive. You can try again, but if this problem persists, run an offline scan and fix. |
| 43010 | A scan is already running on this drive. Chkdsk can not run more than one scan on a drive at a time. |
| 43011 | A snapshot error occured while scanning this drive. You can try again, but if this problem persists, run an offline scan and fix. |
| 43012 | A snapshot error occured while scanning this drive. Run an offline scan and fix. |
| 43013 | Cannot open drive for direct access |
| 43014 | Cannot determine the file system of the drive |
Storage Provider Errors 46000 - 46999
| Error Value | Description |
|---|---|
| 46000 | Cannot connect to the storage provider. |
| 46001 | The storage provider cannot connect to the storage subsystem. |
| 46002 | The storage provider does not support a required profile. |
| 46003 | The storage provider does not support a required association. |
Storage Subsystem Errors 47000 - 47999
| Error Value | Description |
|---|---|
| 47000 | No storage pools were found that can support this virtual disk configuration. |
Partition Errors 48000 - 48999
| Error Value | Description |
|---|---|
| 48000 | This operation is not supported on primordial storage pools. |
| 48001 | The storage pool is reserved for special usage only. |
| 48002 | The specified resiliency setting is not supported by this storage pool. |
| 48004 | There are not enough physical disks in the storage pool to create the specified virtual disk configuration. |
| 48005 | The specified storage pool could not be found. |
| 48006 | The storage pool could not complete the operation because its health or operational status does not permit it. |
| 48007 | The storage pool could not complete the operation because its configuration is read-only. |
| 48008 | The storage pool contains virtual disks. |
| 48009 | The number of thin provisioning alert thresholds specified exceeds the limit for this storage pool. |
Resiliency Settings Errors 49000 - 49999
| Error Value | Description |
|---|---|
| 49000 | No resiliency setting with that name exists. |
| 49001 | The value for NoSinglePointOfFailure is not supported. |
| 49002 | The value for PhysicalDiskRedundancy is outside of the supported range of values. |
| 49003 | The value for NumberOfDataCopies is outside of the supported range of values. |
| 49004 | The value for ParityLayout is outside of the supported range of values. |
| 49005 | The value for Interleave is outside of the supported range of values. |
| 49006 | The value for NumberOfColumns is outside of the supported range of values. |
Virtual Disk Errors 50000 - 50999
| Error Value | Description |
|---|---|
| 50000 | The specified virtual disk could not be found. |
| 50001 | Could not repair the virtual disk because too many physical disks failed. Not enough information exists on the remaining physical disks to reconstruct the lost data. |
| 50002 | The virtual disk could not complete the operation because another computer controls its configuration. |
| 50003 | The virtual disk could not complete the operation because its health or operational status does not permit it. |
| 50004 | The virtual disk could not complete the operation because its Manual Attach status does not permit it. |
Physical Disk Errors 51000 - 51999
| Error Value | Description |
|---|---|
| 50000 | One of the physical disks specified is not supported by this operation. |
| 50001 | Not enough physical disks were specified to successfully complete the operation. |
| 50002 | One of the physical disks specified is already in use. |
| 50003 | One of the physical disks specified uses a sector size that is not supported by this storage pool. |
| 50004 | One of the physical disks specified could not be removed because it is still in use. |
Masking Set Errors 52000 - 52999
| Error Value | Description |
|---|---|
| 52000 | The device number specified is not valid. |
| 52001 | The HostType requested is not supported. |
| 52002 | DeviceAccess must be specified for each virtual disk. |
Initiator ID Errors 53000 - 53999
| Error Value | Description |
|---|---|
| 53000 | The initiator address specified is not valid |
| 53001 | Only one initiator address is acceptable for this operation. |
Target Port Errors 54000 - 54999
| Error Value | Description |
|---|---|
| 54000 | The target port address specified is not valid. |
Related topics
Send comments about this topic to Microsoft
Build date: 10/26/2012
