Edit

Disable compression on a table or index

  • Article

Applies to: SQL Server Azure SQL Database Azure SQL Managed Instance Azure Synapse Analytics Analytics Platform System (PDW)

This article describes how to disable compression on a table or index in SQL Server by using SQL Server Management Studio or Transact-SQL.

Limitations and restrictions

  • If the table is a heap, the rebuild operation for ONLINE mode is single threaded. Use OFFLINE mode for a multi-threaded heap rebuild operation. For a more information about data compression, see Data Compression.

  • To evaluate how changing the compression state affects a table, an index, or a partition, use the sp_estimate_data_compression_savings stored procedure.

  • You can't change the compression setting of a single partition if the table has nonaligned indexes.

Permissions

Requires ALTER permission on the table or index.

Use SQL Server Management Studio

  1. In Object Explorer, expand the database that contains the table on which you want to disable compression and then expand the Tables folder.

  2. Right-click the table or index on which you want to disable compression, point to Storage and select Manage Compression....

  3. To disable compression on an index, expand the table that contains the index and then expand the Indexes folder.

  4. In the Data Compression Wizard, on the Welcome to the Data Compression Wizard page, select Next.

  5. On the Select Compression Type page, select None as the compression type to apply to each partition in the index on which you want to disable compression. When finished, select Next.

    The following options are available on the Select Compression Type page:

    • Use the same compression type for all partitions checkbox

      Select to configure the same compression setting for all partitions. This enables the selection box and disables the Compression Type column in the grid. When selected, the options in the adjacent list are None, Row, and Page.

    • Partition Number

      Lists each partition in the table or index. This column is read-only.

    • Compression Type

      Select the compression option for each partition. Isn't available when Use the same compression type for all partitions is selected. List options are None, Row, and Page.

    • Boundary

      Displays the partition boundary. This column is read-only.

    • Row Count

      Displays the number of rows in this partition. This column is read-only.

    • Current Space

      Displays the current space this partition occupies in megabytes (MB). This column is read-only.

    • Requested Compressed Space

      After you select Calculate, this column displays the estimated size of each partition after compression by using the setting specified in the Compression Type column. This column is read-only.

    • Calculate

      Select to estimate the size of each partition after compression by using the setting specified in the Compression Type column.

  6. In the Select an Output Option page, specify how you want to complete this task. Select Create Script to create a SQL script based the previous pages in the wizard. Select Run immediately to create the new partitioned table after completing all remaining pages in the wizard. Select Schedule to create the new partitioned table at a predetermined time in the future.

    If you select Create script, the following options are available under Script options:

    • Script to file

      Generates the script as a .sql file. Enter a file name and location in the File name box or select Browse to open the Script File Location dialog box. From Save As, select Unicode text or ANSI text.

    • Script to Clipboard

      Saves the script to the Clipboard.

    • Script to New Query Window

      Generates the script to a new Query Editor window. This is the default selection.

      If you select Schedule, select Change schedule.

    1. In the New Job Schedule dialog box, in the Name box, enter the job schedule's name.

    2. On the Schedule type list, select the type of schedule:

      • Start automatically when SQL Server Agent starts
      • Start whenever the CPUs become idle
      • Recurring. Select this option if your new partitioned table updates with new information regularly.
      • One time. This is the default selection.

    3. Select or clear the Enabled check box to enable or disable the schedule.

    4. If you select Recurring:

      1. Under Frequency, on the Occurs list, specify the frequency of occurrence:

        • If you select Daily, in the Recurs every box, enter how often the job schedule repeats in days.

        • If you select Weekly, in the Recurs every box, enter how often the job schedule repeats in weeks. Select the day or days of the week on which the job schedule is run.

        • If you select Monthly, select either Day or The.

          • If you select Day, enter both the date of the month you want the job schedule to run and how often the job schedule repeats in months. For example, if you want the job schedule to run on the 15th day of the month every other month, select Day and enter "15" in the first box and "2" in the second box. The largest number allowed in the second box is "99".

          • If you select The, select the specific day of the week within the month that you want the job schedule to run and how often the job schedule repeats in months. For example, if you want the job schedule to run on the last weekday of the month every other month, select Day, select last from the first list and weekday from the second list, and then enter "2" in the last box. You can also select first, second, third, or fourth, as well as specific weekdays (for example: Sunday or Wednesday) from the first two lists. The largest number allowed in the last box is "99".

      2. Under Daily frequency, specify how often the job schedule repeats on the day the job schedule runs:

        • If you select Occurs once at, enter the specific time of day when the job schedule should run in the Occurs once at box. Enter the hour, minute, and second of the day, as well as AM or PM.

        • If you select Occurs every, specify how often the job schedule runs during the day chosen under Frequency. For example, if you want the job schedule to repeat every 2 hours during the day that the job schedule is run, select Occurs every, enter "2" in the first box, and then select hour(s) from the list. From this list you can also select minute(s) and second(s). The largest number allowed in the first box is "100".

          In the Starting at box, enter the time that the job schedule should start running. In the Ending at box, enter the time that the job schedule should stop repeating. Enter the hour, minute, and second of the day, as well as AM or PM.

      3. Under Duration, in Start date, enter the date that you want the job schedule to start running. Select End date or No end date to indicate when the job schedule should stop running. If you select End date, enter the date that you want to job schedule to stop running.

    5. If you select One Time, under One-time occurrence, in the Date box, enter the date that the job schedule will be run. In the Time box, enter the time that the job schedule will be run. Enter the hour, minute, and second of the day, as well as AM or PM.

    6. Under Summary, in Description, verify that all job schedule settings are correct.

    7. Select OK.

    After completing this page, select Next.

  7. On the Review Summary page, under Review your selections, expand all available options to verify that all settings are correct. If everything is as expected, select Finish.

  8. On the Compression Wizard Progress page, monitor status information about the actions of the Create Partition Wizard. Depending on the options that you selected in the wizard, the progress page might contain one or more actions. The top box displays the overall status of the wizard and the number of status, error, and warning messages that the wizard has received.

    The following options are available on the Compression Wizard Progress page:

    • Details

      Provides the action, status, and any messages that are returned from action taken by the wizard.

    • Action

      Specifies the type and name of each action.

    • Status

      Indicates whether the wizard action as a whole returned the value of Success or Failure.

    • Message

      Provides any error or warning messages that are returned from the process.

    • Report

      Creates a report that contains the results of the Create Partition Wizard. The options are View Report, Save Report to File, Copy Report to Clipboard, and Send Report as Email.

    • View Report

      Opens the View Report dialog box, which contains a text report of the progress of the Create Partition Wizard.

    • Save Report to File

      Opens the Save Report As dialog box.

    • Copy Report to Clipboard

      Copies the results of the wizard's progress report to the Clipboard.

    • Send Report as Email

      Copies the results of the wizard's progress report into an email message.

    When complete, select Close.

Use Transact-SQL

Disable compression on a table

  1. In Object Explorer, connect to an instance of Database Engine.

  2. On the Standard bar, select New Query.

  3. Copy and paste the following example into the query window and select Execute.

    USE AdventureWorks2022;
GO
ALTER TABLE Person.Person REBUILD PARTITION = ALL
WITH (DATA_COMPRESSION = NONE);
GO

Disable compression on an index

  1. In Object Explorer, connect to an instance of Database Engine.

  2. On the Standard bar, select New Query.

  3. Copy and paste the following example into the query window and select Execute.

    USE AdventureWorks2022;
GO
ALTER INDEX AK_Person_rowguid ON Person.Person REBUILD PARTITION = ALL WITH (DATA_COMPRESSION = NONE);
GO

Next steps